Question

电气专业英语翻译

天津某化纤毛纺厂供电系统设计

摘 要

本设计旨在通过对天津某化纤毛纺厂供配电系统的设计使设计者了解掌握工业企业供电系统的设计过程及其基本技能，在设计过程中不但加深了对供配电这门技术的理解，还培养了对理论知识灵活应用能力。设计过程包括：负荷计算、方案论证、短路计算、设备选择、无功补偿及变配电所的设计等。此污水处理厂为二级负荷，有两路电源进线，厂区内共设两个降压变电所（35KV/10KV）.（10KV/0.4KV）。因供电电源要求功率因数大于0.9，因此通过在低压侧加电容进行补偿使之达到要求。通过负荷计算和对各短路点的电流计算选择设备，使之满足要求。在设计过程中充分考虑了供电系统的可靠性与安全性，并力求使之经济合理。
关键词：变电所；变压器；负荷计算；短路计算；照度计算；功率补偿

苏州某研发中心大楼电气设计
摘 要

本设计为苏州某研发中心大楼的电气设计。电气设计遵循《民用建筑电气设计规范》（JGJ16-2008），并符合国家现行的其他规范和标准。根据建筑的规模大小和功能需求，查询规范知，该建筑属于高层民用建筑，建筑类别为一类建筑，耐火等级为一级，防雷等级为二级，一般照明采用三级负荷供电，消防用电和重要负荷采用一级负荷供电,低压配电系统的接线方式采用TN-C-S。防雷系统设计采用避雷网。
该建筑电气设计包括两部分：强电系统设计和弱电系统设计。其中强电部分包括低压配电设计、照明系统设计、防雷与接地系统设计；弱电部分包括消防系统设计、有线电视系统设计、电话系统设计、网络系统设计、安防系统设计。设计中要根据建筑的规模、使用要求及设计原则，计算得出相应的技术指标，并进行导线及设备的选型，使之满足经济合理性及节能要求，保证供电的可靠性。
关键词：低压配电；照明；消防；防雷与接地

Answer 1

The design of a Tianjin chemical fiber textile factory power supply system
Abstract
This design aims to through to Tianjin, a chemical fiber textile factory for distribution system design allows designers to understand the design process of the power supply system of industrial enterprises and basic skills, in the design process not only to deepen the understanding of power supply and distribution of the technology, training of theoretical knowledge of flexible application ability. Design process including: load calculation, scheme demonstration, short circuit calculation, equipment selection, reactive power compensation and the distribution of the design etc.. The sewage treatment plant for secondary load, two power supply into line, plant a total of two step-down substation (35KV/10KV). 10KV/0.4KV).Because of the power supply power factor greater than 0.9, so the compensation in low voltage side capacitor to meet requirements of. The current through the load calculation andthe calculation of the short-circuit point selection of equipment, so as to meet therequirements. In the design process of the safety and reliability of power supply system are fully considered, and strive to make the economy reasonable.

Suzhou R & D center building electrical design
Abstract
The design for the electrical design of a Suzhou R & D center building. Electrical design follow the civil architectural electrical design code (jgj16-2008), and in accordance with the current national standard and standard. According to the size and functional demand of construction, query specification, the building belongs to the high-rise civil buildings, building category for a class of construction, the fire resistance rating for a level, the lightning protection level for secondary and general lighting with three load power supply, fire power and the important load with a load power supply, the connection of the low voltage distribution system TN-C-S.Lightning protection system design using lightning protection network.
The building electrical design includes two parts: the design of power system and the weak system design. These include high voltage low voltage power distribution design, lighting system design, lightning protection and grounding system design; weak part including fire protection system design and cable TV system design, design of a telephone system, network system design, security system design. Design should be according to the construction scale, the use requirement and design principle, calculated according to the technical specifications, and wire and the equipment selection, so as to meet the economic rationality and energy conservation requirements, ensure the power supply reliability.

Answer 2

为您解答如下：
天津某化纤毛纺厂供电系统设计

摘 要

本设计旨在通过对天津某化纤毛纺厂供配电系统的设计使设计者了解掌握工业企业供电系统的设计过程及其基本技能，在设计过程中不但加深了对供配电这门技术的理解，还培养了对理论知识灵活应用能力。设计过程包括：负荷计算、方案论证、短路计算、设备选择、无功补偿及变配电所的设计等。此污水处理厂为二级负荷，有两路电源进线，厂区内共设两个降压变电所（35KV/10KV）.（10KV/0.4KV）。因供电电源要求功率因数大于0.9，因此通过在低压侧加电容进行补偿使之达到要求。通过负荷计算和对各短路点的电流计算选择设备，使之满足要求。在设计过程中充分考虑了供电系统的可靠性与安全性，并力求使之经济合理。
关键词：变电所；变压器；负荷计算；短路计算；照度计算；功率补偿

苏州某研发中心大楼电气设计
摘 要

本设计为苏州某研发中心大楼的电气设计。电气设计遵循《民用建筑电气设计规范》（JGJ16-2008），并符合国家现行的其他规范和标准。根据建筑的规模大小和功能需求，查询规范知，该建筑属于高层民用建筑，建筑类别为一类建筑，耐火等级为一级，防雷等级为二级，一般照明采用三级负荷供电，消防用电和重要负荷采用一级负荷供电,低压配电系统的接线方式采用TN-C-S。防雷系统设计采用避雷网。
该建筑电气设计包括两部分：强电系统设计和弱电系统设计。其中强电部分包括低压配电设计、照明系统设计、防雷与接地系统设计；弱电部分包括消防系统设计、有线电视系统设计、电话系统设计、网络系统设计、安防系统设计。设计中要根据建筑的规模、使用要求及设计原则，计算得出相应的技术指标，并进行导线及设备的选型，使之满足经济合理性及节能要求，保证供电的可靠性。
关键词：低压配电；照明；消防；防雷与接地
Tianjin a certain chemical fiber woolen mill power supply system design

Pick to

This design aims to through the design of a certain chemical fiber woolen mill power supply system in tianjin to designers to grasp the design process of industrial enterprise power supply system and its basic skills, in the design process not only deepened the understanding of power supply this technology, and train the ability of the flexible application of theoretical knowledge. The design process include: load calculation, short circuit calculation, equipment selection, project demonstration, reactive power compensation and distribution design, etc. The sewage treatment plant as the secondary load, there are two way power supply into line, the factory have two step-down substation (35 KV / 10 KV). (10 KV / 0.4 KV). Because of the power supply for power factor more than 0.9, so through in low voltage side capacitance compensation to meet the requirements. Through load calculation and selection for the current calculation of short-circuit point equipment, to meet the requirements. In the design process fully consider the security and reliability of power supply system, and strive to make economic sense.
Key words: substation; Transformer; Load calculation; Short circuit calculation. Intensity of illumination computation; Power compensation

A research and development center building electrical design in suzhou
Pick to

This design for a research and development center building electrical design in suzhou. Electrical design follow the civil construction electrical design specification (JGJ16-2008), and other specifications and conform to the current national standards. According to the scale of construction and the function demand, query, the building belongs to the high-rise civil buildings, category for a class of buildings, fire resistance rating for level 1, level of lightning protection for the secondary, general lighting use level 3 load power supply, fire power and important load using level load power supply, the connection mode of low-voltage distribution system adopts TN - C - S. With lightning protection network in lightning protection system design.
The building electrical design includes two parts: the high voltage system design and the weak current system design. High-voltage electrical parts including low-voltage distribution design, lighting system design, lightning protection and grounding system design; Elv part includes the fire protection system design, cable television system design, telephone system, network system design, security system design. Design according to the size of the building, use requirement and design principles, calculation of the technical indicators, and wire and equipment type selection, make it meet the requirements of economic rationality and energy conservation, to ensure the reliability of power supply.
Key words: low-voltage distribution; Lighting; The fire; Lightning protection and grounding .
-----------------------------------
如有疑问欢迎追问！
满意请点击右上方【选为满意回答】按钮

Answer 3

我昨天帮一个翻译了论文摘要， 翻译完了，TMD还说这不对，那不对。 GG翻译专业，专业八级都过了。 再也不详在做这费时不讨好的事情了。

Answer 4

啧啧，我不会，看着也是醉了，学了这么多年英语，每次遇到这样的科技翻译都满满的挫败感。

Answer 5

花点钱找个翻译公司吧。百度上很难找到有专业背景的，翻译的东西没法用，都是让歪果仁翻白眼儿的译文。