Question

如何将我的H3C wa2620e瘦AP灌成胖AP，请给个ftp实现灌fat.bin的办法

如何将我的H3C wa2620e瘦AP灌成胖AP，请给个ftp实现灌fat.bin的办法
试过超级终端灌，总会在download成功后还显示fit.bin
请大家教我怎么弄ftp灌，详细点，悬赏可追加
要详细点的命令

• 你的回答被采纳后将获得：
• 系统奖励15（财富值+成长值）+难题奖励10（财富值+成长值）+提问者悬赏100（财富值+成长值）

Answer 1

******************************************************************************
* Copyright (c) 2004-2012 Hangzhou H3C Tech. Co., Ltd. All rights reserved. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************

<WA2620E-AGN>
<WA2620E-AGN>dis ip inter b
*down: administratively down
(s): spoofing
Interface Physical Protocol IP Address Description
Vlan1 up up 192.168.0.50 Vlan-inte...
<WA2620E-AGN>system-view
[WA2620E-AGN]int vlan 1
[WA2620E-AGN-Vlan-interface1]ip add 1.1.1.1 24
[WA2620E-AGN-Vlan-interface1]quit

与设备直连电脑改成1.1.1.2 24

[WA2620E-AGN]ping 1.1.1.2
PING 1.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 1.1.1.2: bytes=56 Sequence=1 ttl=64 time=2 ms
Reply from 1.1.1.2: bytes=56 Sequence=2 ttl=64 time=1 ms
Reply from 1.1.1.2: bytes=56 Sequence=3 ttl=64 time=1 ms
Reply from 1.1.1.2: bytes=56 Sequence=4 ttl=64 time=1 ms
Reply from 1.1.1.2: bytes=56 Sequence=5 ttl=64 time=1 ms

--- 1.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/2 ms

删除fit.bin

<WA2620E-AGN>dir
Directory of flash:/

0 -rw- 1332 Jan 21 2009 20:52:46 startup.cfg
1 -rw- 455 Jan 21 2009 20:52:42 system.xml
2 -rw- 9122944 Aug 08 2008 20:00:00 wa2600_fit.bin

13589 KB total (4673 KB free)

<WA2620E-AGN>del
<WA2620E-AGN>delete /
<WA2620E-AGN>delete /unreserved w
<WA2620E-AGN>delete /unreserved wa2600_fit.bin
The contents cannot be restored!!! Delete flash:/wa2600_fit.bin?[Y/N]:y
Deleting a file permanently will take a long time. Please wait...
...........................................................................
%Delete file flash:/wa2600_fit.bin...Done.

设置好电脑端tftp的目录
然后将两个文件灌进去

<WA2620E-AGN>tfp
<WA2620E-AGN>tf
<WA2620E-AGN>tftp 1.1.1.2 g
<WA2620E-AGN>tftp 1.1.1.2 get apwa2600_v2.02.btw
...
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait........
TFTP: 434436 bytes received in 4 second(s)
File downloaded successfully.

<WA2620E-AGN>ftp
<WA2620E-AGN>tf
<WA2620E-AGN>tftp 1.1.1.2 g
<WA2620E-AGN>tftp 1.1.1.2 get WA2600-CMW520-R1122P30-FAT.bin
...
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait........................\
............................................................
TFTP: 9161840 bytes received in 80 second(s)
File downloaded successfully.

灌入成功
修改启动项

<WA2620E-AGN>bo
<WA2620E-AGN>boot?
boot-loader
bootrom

<WA2620E-AGN>bootr
<WA2620E-AGN>bootrom ?
backup Backup BootRom
read Read bootrom
restore Restore bootrom
update Update bootrom

<WA2620E-AGN>bootrom u
<WA2620E-AGN>bootrom update ?
file File path

<WA2620E-AGN>bootrom update f
<WA2620E-AGN>bootrom update file w
<WA2620E-AGN>bootrom update file wa2600-cmw520-r1122p30-fat.bin
<WA2620E-AGN>dir
Directory of flash:/

0 -rw- 1332 Jan 21 2009 20:52:46 startup.cfg
1 -rw- 455 Jan 21 2009 20:52:42 system.xml
2 -rw- 434436 Jan 22 2009 01:18:21 apwa2600_v2.02.btw
3 -rw- 9161840 Jan 22 2009 01:20:19 wa2600-cmw520-r1122p30-fat.bin

13589 KB total (4210 KB free)

<WA2620E-AGN>bo
<WA2620E-AGN>boot
<WA2620E-AGN>boot-loader
<WA2620E-AGN>bootrom u
<WA2620E-AGN>bootrom update f
<WA2620E-AGN>bootrom update file ap
<WA2620E-AGN>bootrom update file apwa2600_v2.02.btw
This command will update bootrom file, Continue? [Y/N]:y
Now updating bootrom, please wait...

Updating basic bootrom!

Update basic bootrom success!
Updating extended bootrom!

Update extended bootrom success!
Update bootrom success!
<WA2620E-AGN>bo
<WA2620E-AGN>boot-
<WA2620E-AGN>boot-loader f
<WA2620E-AGN>boot-loader file w
<WA2620E-AGN>boot-loader file wa2600-cmw520-r1122p30-fat.bin
This command will set the boot file. Continue? [Y/N]:y
The boot file must be wa2600_fat.bin or wa2600_fit.bin!
Failed to set boot file on slot 1!

提示启动名称错误，必须为wa2600_fat.bin or wa2600_fit.bin
重命名启动文件

<WA2620E-AGN>rem
<WA2620E-AGN>re
<WA2620E-AGN>rename
<WA2620E-AGN>ren
<WA2620E-AGN>rename f
<WA2620E-AGN>rename flash:/wa
<WA2620E-AGN>rename flash:/wa2600-cmw520-r1122p30-fat.bin ?
STRING [drive][path][file name]
flash: Device name

<WA2620E-AGN>rename flash:/wa2600-cmw520-r1122p30-fat.bin f
<WA2620E-AGN>rename flash:/wa2600-cmw520-r1122p30-fat.bin flash:/wa2600_fat.bin
Rename flash:/wa2600-cmw520-r1122p30-fat.bin to flash:/wa2600_fat.bin?[Y/N]:y
.
%Renamed file flash:/wa2600-cmw520-r1122p30-fat.bin to flash:/wa2600_fat.bin.
<WA2620E-AGN>dir
Directory of flash:/

0 -rw- 1332 Jan 21 2009 20:52:46 startup.cfg
1 -rw- 455 Jan 21 2009 20:52:42 system.xml
2 -rw- 434436 Jan 22 2009 01:18:21 apwa2600_v2.02.btw
3 -rw- 9161840 Jan 22 2009 01:22:54 wa2600_fat.bin

13589 KB total (4210 KB free)

<WA2620E-AGN>bo
<WA2620E-AGN>boot-
<WA2620E-AGN>boot-loader f
<WA2620E-AGN>boot-loader file w
<WA2620E-AGN>boot-loader file wa2600_fat.bin
This command will set the boot file. Continue? [Y/N]:y
The specified file will be used as the boot file at the next reboot on slot 1!

重启

<WA2620E-AGN>reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Current configuration will be lost, save c
urrent configuration? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait.........................
Configuration is saved to device successfully.
This command will reboot the device. Continue? [Y/N]:y
#Jan 22 01:24:06:390 2009 WA2620E-AGN DEVM/1/REBOOT:
Reboot device by command.

%Jan 22 01:24:06:390 2009 WA2620E-AGN DEVM/5/SYSTEM_REBOOT: System is rebooting
now.
%Jan 22 01:24:08:548 2009 WA2620E-AGN IFNET/3/LINK_UPDOWN: GigabitEthernet1/0/1
link status is DOWN.
%Jan 22 01:24:08:551 2009 WA2620E-AGN IFNET/3/LINK_UPDOWN: Vlan-interface1 link
status is DOWN.
%Jan 22 01:24:08:551 2009 WA2620E-AGN IFNET/5/LINEPROTO_UPDOWN: Line protocol on
the interface Vlan-interface1 is DOWN.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare..
The Extend BootWare is self-decompressing............................Done!

****************************************************************************
* *
* H3C WA2620E-AGN BootWare, Version 2.02 *
* *
****************************************************************************
Copyright (c) 2004-2013 Hangzhou H3C Technologies Co., Ltd.

Compiled Date : Aug 7 2013
CPU Type : OCTEON CN5010
CPU L1 Cache : 32KB
CPU Clock Speed : 400MHz
Memory Type : DDR2 SDRAM
Memory Size : 128MB
Memory Speed : 532MHz
BootWare Size : 512KB
Flash Size : 16MB
PCB Version : Ver.C

BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash:/wa2600_fat.bin!...........
..........................................................
The main application file is self-decompressing.............................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
......................................................Done!
System application is starting...
User interface con0 is available.

Press ENTER to get started.
<WA2620E-AGN>
#Jan 22 01:24:43:761 2009 WA2620E-AGN SHELL/4/LOGIN:
Trap 1.3.6.1.4.1.25506.2.2.1.1.3.0.1<hh3cLogIn>: login from Console
%Jan 22 01:24:43:761 2009 WA2620E-AGN SHELL/5/SHELL_LOGIN: Console logged in fro
m con0.
<WA2620E-AGN>
<WA2620E-AGN>
<WA2620E-AGN>
<WA2620E-AGN>sy
<WA2620E-AGN>system-view
System View: return to User View with Ctrl+Z.
[WA2620E-AGN]dis loc
[WA2620E-AGN]dis local-user
The contents of local user admin:
State: Active
ServiceType: telnet/web
Access-limit: Disabled Current AccessNum: 0
User-group: system
Bind attributes:
Authorization attributes:
User Privilege: 3
Total 1 local user(s) matched.

[WA2620E-AGN]loc
[WA2620E-AGN]local-user admin
[WA2620E-AGN-luser-admin]pa
[WA2620E-AGN-luser-admin]passwords
[WA2620E-AGN-luser-admin]password s
[WA2620E-AGN-luser-admin]password simple admin
[WA2620E-AGN-luser-admin]qu
[WA2620E-AGN]

Answer 2

请看完本人写的百度经验
http://jingyan.baidu.com/article/ceb9fb100589e88cad2ba0eb.html