Question

BIOS里这几句话的意思

1.tab or enter selects field

2.selects the display language for the bios

3.specifies the capacity and physical size of the floppy disk drive A :do not select (disabled)if using 3 mode floppy disk drive

4.press enter to enter next page for

5.detailed hard drive settings

6.（disabled）disables the ps/2 mouse

7.functlon and frees up irq/2

8.（enabled） enables and supports ps/2 mouse function

9.（auto detect） enables the ps/2 mouse function if detected

10.enables disables onboard lan's option rom

11.supervisor password controls full access <enter> to change password; <enter> again to disable password

12.sets the mode of operation if an ac power loss occurs

13.<say off> keeps the power off until the power button is pressed

14.<power on> restores power as soon as ac is applied

15.<auto>restarts computer if it was on before power failure,stays off otherwise

16.enables or disables the processor's xd feature

17.display the diagnostic screen during boot

18.Enter:accept

19.<enter>to go to the sub-menu

20.boot sequence:use the up or down arrow to select the device, then<+>or<-> to move the device upward or downward

21.exits setup utility and save your changes to cmos

22.exits setup utility without saving changes to cmos

23.loads setup default for all setup items

24.loads previous values from cmos for all setup items

25.seves changes to cmos

有些用翻译工具翻译出来读不通，有的翻译不出来。。。

Answer 1

1.tab or enter selects field
按 tab 或 挥着键选定
2.selects the display language for the bios
选择bios语言
3.specifies the capacity and physical size of the floppy disk drive
制定软驱容量及尺寸
A :do not select (disabled)if using 3 mode floppy disk drive
如果使用3mode的软驱 不选（禁止） 本人注释：3mode是800年前日本鬼子开发的软驱模式
4.press enter to enter next page for
按回车进入下一页面
5.detailed hard drive settings
硬盘斜街设定
6.（disabled）disables the ps/2 mouse
禁止、启用 ps2 鼠标 就是圆口鼠标
7.functlon and frees up irq/2
设定会释放 irq中断设定
8.（enabled） enables and supports ps/2 mouse function
这个跟6是一样的
9.（auto detect） enables the ps/2 mouse function if detected
跟6差不多，这个是自动检测是否支持ps2戍边
10.enables disables onboard lan's option rom
是否取用板载网卡远程启动功能
11.supervisor password controls full access <enter> to change
广利元密码设定， 最高权限《回车》修改，
password; <enter> again to disable password
再按回车取消
12.sets the mode of operation if an ac power loss occurs
设定系统在断电后的恢复状态
13.<say off> keeps the power off until the power button is pressed
（保持关机）保持关机，直到按下电源键
14.<power on> restores power as soon as ac is applied
（自动开机）有电后自动开机
15.<auto>restarts computer if it was on before power failure,stays off otherwise
《自动》恢复断电前状态
16.enables or disables the processor's xd feature
是否开启 cpu xd 特性
17.display the diagnostic screen during boot
禁止开机时硬件检测画面
18.Enter:accept
按回车接受改变
19.<enter>to go to the sub-menu
按回车进入下一级菜单
20.boot sequence:use the up or down arrow to select the device, then<+>or<-> to move the device upward or downward
启动次序：上下箭头选定设备，加减号移动设备
21.exits setup utility and save your changes to cmos
保存修改并推出bios
22.exits setup utility without saving changes to cmos
不保存修改并推出bios
23.loads setup default for all setup items
恢复bios默认设置
24.loads previous values from cmos for all setup items
恢复上次保存的bios设定
25.seves changes to cmos
保存bios设定

居然不给分，汗。。。。。。。。。