高分悬赏英文版的电动车的说明书。急用！！
1个回答
展开全部
中文和英文版本。字数限制，只写了英文!
First, electric car use environmental condition
Electric car when exwork uses by an examination.
(1) main technical performance request
(1) electric car highest speed should not be bigger than 20km/h.
(2) electric car entire vehicle quality should not be bigger than 40kg.
(3) electric car must have the good foot pedal to ride the good function.
After a (4) electrically operated bicycle charge continues the course to be supposed not to be smaller than 25km.
(5) electrically operated bicycle makes the electrically operated uniform speed rides when the line the noise by the maximum speed to be supposed not to be bigger than 62db.
(6) hundred kilometers electricity consume should not be bigger than 1.2kwh.
(7) electrically operated bicycle electric motor fixed continuously output should not be bigger than 240W.
(2) entire vehicle safety requirements
(1) the maximum speed electric bicycles to electric ride, the dry braking distance should be not more than 4m, wet braking distance should be not more than 15m.
(2) electric bicycle tire wheel width should be not more than 54mm. Frame / Front * combination of the impact / shock strength of the riser, the horizontal tubes, wheels, saddle, pedal should be in accordance with the provisions of GB3565-1993.
(3) electric cars should be equipped with a headlight and reflector before and after reflector, side reflector, should be returned to its port after device installed.
(4) the installation of electrical systems in place, the correct polarity, the system of electrical installations should comply with the requirements of GB3565-1993. Current electrical wiring should be adapted to ensure that electrical safety can * ride.
(5) of the electrical system to take water-resistant measures, the system should not be used for exposed wiring, and electrical parts of the body shell should not be charged, the insulation resistance value should be not less than 2MΩ.
(6) of the battery electric bicycle should be a good seal. Under normal conditions, the installation location, charge, discharge, when there should be no leakage of fluid phenomena. The nominal battery voltage should be not more than 48V.
(7) electric bicycle brake power devices should be in the brake should be able to automatically cut off the power first.
(8) electric bicycle controller should have the under-voltage, over-current protection function and short-circuit device. Riding in the electric, the speed should be stable.
(C) vehicle assembly requirements
(1) electric bike models require assembly should not be installed the wrong equipment and leakage.
(2) electric bicycle fastening the fasteners should be in place, the rotating parts should be flexible operation.
(3) of the symmetric components in the frame center should be symmetrical face can not be significantly skewed.
(4) variable-speed devices and the braking system should be fitted correctly, flexible manipulation.
(5) Electric Bicycle Fixed pieces of moving parts and does not allow grazing.
(6) radial rim, beating the volume of a round face, with a rim前后轮*, frame-ping, Li * on both sides of space relative deviation, relative deviation前后轮center surface are consistent with the provisions of GB/T3566-1993.
(D) the appearance of vehicle requirements
(1) Electric Bicycle parts of the exposed surface should be clean, no dirt, no rust, trademarks, decals should be complete, clear, correct position.
(2) electric vehicle plastic parts of the color of the surface should be uniform, non-obvious edge, scratch, crack and sag.
(3) of the plating over the exposed parts in line with the provisions of QB/T1217-1991.
(4) over the exposed parts of the paint in line with the provisions of QB/T1218-1991.
(5) pieces of aluminum alloy exposed in line with the provisions of QB/T1284-1995.
(E) electric vehicle is subject to 100km cycling road test
During the trial process can not occur in all parts of the broken vehicle and electrical control system is damaged or invalid parts. Cycling can not afford to lose its electrical function.
(Vi) electric cars must be manual and have the following
(1) read the manual carefully to understand the performance of electric bike before, do not use electric bicycles, not to lend will not manipulate people riding electric bike.
(2) of the horizontal tubes, the risers, saddles, saddle tube and wheel torque fasteners should be tightened Recommended: should be noted that the riser pipe and the saddle of the safety line.
(3) parts lubrication, lubrication oil lubrication cycle and recommended.
(4) right up the chain tight and adjustment method.
(5) the adjustment of brakes and brake Paper on the proposed change, pay attention to rain, snow riding should increase the braking distance.
(6) electric motors, controllers, batteries and maintenance of the correct method to use.
(7) the correct charger, the safe use of the method.
(8) GB/17761-1999 standards in Appendix A (the standard in Appendix) the technical parameters and performance indicators.
Second, the use of electric cars Notes
(A) must comply with operating requirements for electric bikes.
(B) the design standards of electric vehicles for load 75kg, over 90kg when the load, the battery and motor will be damaged.
(C) a long time the battery can not be shelved, shelved charge at least once a month. After cycling the battery discharge must be kept fully charged, it will be a great impact on battery life, will cause serious end-of-life battery.
(D) When the power is exhausted, the system will automatically power off. However, after power off, battery and counter-dancing's "virtual" voltage (reactive power and voltage), then must be recharged after use, otherwise it will create over discharge the battery, which will damage the battery can not be repaired.
(E) electric bicycle trip mileage continued 40-50km. The actual trip mileage continued use will be affected by many factors (such as frequent brake, start, road surfaces, the temperature is too low, on steep slopes, wind speed and under-inflated tires, heavy load) the impact.
(F) attention to the front of the display instrument. Power to open, the electric vehicle can ride at a state, a red LED power indicator light, while green, yellow LED power indicator light, with power cycling, when the green light, yellow light is off, that is about to run out of battery power, at the moment electric ride should stop as soon as possible to the battery charge.
(Vii) pre-riding all the preparatory work must be ready to ensure ride safety.
(1) get off the ground, sliding on and off is prohibited in order to ensure the safety of users.
(2) on the car before opening the power lock switch, and get off before the power lock-off switch.
(3) adjusting the saddle and handlebar height, saddle attention may not be exposed riser pipe and the safety line.
(4) should be slow to speed up cycling. From 0-20km / h, acceleration time is not less than 10S, in order to maintain smooth traffic.
(5) to minimize the number of start. Rapid economic growth of the car (the most power to speed) is generally 16-18km / h.
(6) attention to the braking distance when the ride is generally 4m, the rain increased to double the braking distance.
(H) the horizontal pipe, the riser of the tightened torque for the 16-18N.m.
(I) saddle, saddle tightened torque tube fasteners for the 18-20N.m.
(J) torque for fastening the rear 40-45N.m; front fastening torque for the 18-20N.m.
(K) before the gate skin wheel should be parallel surface pressure, the level of consistency. Paper gates of the space and the wheel is not more than 3mm; brake tightness to grip the handle away from the gate to be able to check the appropriate 10mm. Not the brake, the brake and the skin may not be any part of the wheel contact, gate Paper obvious wear and tear should be replaced in time to avoid injury Rim.
(12) should be elastic spokes, chains grazing may not occur with the body. Adjustment, adjustable rear and the central axis of the distance from the chain up tight control in the 10-15mm.
(Xiii) the prohibition of lubricating rear.
(Xiv) to the appropriate tire pressure, caused by excessive deformation of aluminum circles; low crack caused by tire and inner tube bite; so that inner tube leakage.
(15) in charge should pay attention to:
(1) First, insert the battery charger output of the charging socket and then connect the power input AC 220V.
(2) red charging indicator light on the charger that the normal charge. Fully charged before the green indicator light, green light and then 1-3 hours for the best filling.
(3) finished first unplug the charger's AC power plug, then unplug and plug the battery connections.
(4) does not prohibit the charging, the time will be empty charger connected to the AC power on.
(5) can take to recharge the battery box can also be recharged in the vehicle directly.
(6) If the box had to recharge the battery, charge the battery box back into the end, we have to lock up, the battery box to prevent power outages caused by the phenomenon of loosening.
(7) directly in the vehicle when charging is prohibited to open the power supply electric bicycle lock, to prevent burning charger.
(8) charging the surrounding environment should be ventilation, no fire, be sure to use consistent with the configuration of the charger, the demolition of the battery box is strictly prohibited without permission.
(9) charger work on a child to reach in order to avoid the risk.
(10) light using light to avoid shock release.
(16) years and as far as possible to prevent the motor started, riding the best first human motor starting up again so as to avoid a zero start, the impact of too much current the battery, electrical and machinery life.
(17) should ride on rainy days to prevent the controller and motor in water, caused by short circuit damage.
(18) climbing, on the bridge, the wind speed and great battery-powered flow through the impact of motor and battery life, the best human-assisted riding at this time.
Third, the electric bicycle maintenance
(A) the maintenance of electrical and maintenance
(1) vehicle is sold prior to installation and commissioning to the best state, in use, please do not arbitrarily removable appliances and related components. Found that when riding transmission components such as the issue of abnormal sound, electricity and other unusual circumstances do not work, should be invited to professional maintenance repair division.
(2) motor are not required to adjust the normal use or maintenance, just some clean work surface to dust. Not to add components in the transmission oil.
(B) the maintenance of batteries and maintenance
(1) When the instrument panel red LED lights when the voltage that power into the hunger zone, should be charging. Charge will be timely to extend the battery life greatly. A day on the battery is fully charged, each charging time should be 8-12 hours. At any time to allow the battery to maintain state of abundance, of great benefit to their life. If after riding a timely charge, will be a great impact on battery life. May result in severe end-of-life battery.
(2) electric bike starts, should be slow to accelerate; in a larger gradient of the road and moving against the wind, it is best able to push enough support to avoid high-current discharge batteries to extend battery and motor life. Electrical components and to avoid burnout.
(3) long-term battery when not in use should be kept fully charged, and be not less than every three months to conduct a supplementary 24-hour charge.
(4) Rechargeable batteries should be in circulation in the air environment. * To avoid a nearby fire source, rechargeable battery pack when it would be preferable to remove in order to facilitate heat dissipation.
(5) batteries in the best working environment temperature
15 ℃ -40 ℃. In this temperature range, the battery will have an impact on the normal work.
(6) can not short-circuit the battery positive and negative side to avoid danger.
(7) can only use the manufacturers provide a dedicated charger for charging.
(8) battery is a special battery. Please do not as a power source other than electric bicycle use, so as to avoid battery damage.
(9) can not use organic solvents to clean the battery case. Accidents involving fires, fire can not use carbon dioxide, and carbon tetrachloride should be used like a fire extinguisher.
(10) with group electrical failure if, please sent to manufacturers or authorized and properly handle relevant agencies. Please do not arbitrarily discarded in order to avoid environmental pollution.
(11) ambient temperature higher than 40 ℃ or lower than -10 ℃, the battery life will be shortened. So when the summer heat, the battery should avoid direct sun. Low temperature in winter, the batteries should be stored indoors, and indoors for recharging. Battery fully charged, the charge should be extended for a further 2 hours.
(12) ambient temperature at -10 ℃, the battery can only produce 60% of electricity consumption. Therefore, the full power of winter mileage than a summer full of power to reduce a lot of mileage. Winter driving in the electric power when traveling for a good pedal.
(13) battery is a consumable, battery life is limited. Battery end-of-life period should be based on mileage full power can only be achieved once the state (25Km) for assessment of the half. That is, a fully charged mileage at less than 13Km termination of battery life, batteries should be replaced with new ones.
(14) summer electric vehicles will be prohibited on a long time exposure under the scorching sun.
(C) the maintenance and maintenance controllers
Controller in the electric bike has been factory adjusted to the best condition. If riding when an electrical malfunction or loss of control over the phenomenon of non-professional maintenance personnel can only be on the cable, connector inspection, if the fault can not be ruled out immediately and professional maintenance of contact points, or manufacturers.
First, electric car use environmental condition
Electric car when exwork uses by an examination.
(1) main technical performance request
(1) electric car highest speed should not be bigger than 20km/h.
(2) electric car entire vehicle quality should not be bigger than 40kg.
(3) electric car must have the good foot pedal to ride the good function.
After a (4) electrically operated bicycle charge continues the course to be supposed not to be smaller than 25km.
(5) electrically operated bicycle makes the electrically operated uniform speed rides when the line the noise by the maximum speed to be supposed not to be bigger than 62db.
(6) hundred kilometers electricity consume should not be bigger than 1.2kwh.
(7) electrically operated bicycle electric motor fixed continuously output should not be bigger than 240W.
(2) entire vehicle safety requirements
(1) the maximum speed electric bicycles to electric ride, the dry braking distance should be not more than 4m, wet braking distance should be not more than 15m.
(2) electric bicycle tire wheel width should be not more than 54mm. Frame / Front * combination of the impact / shock strength of the riser, the horizontal tubes, wheels, saddle, pedal should be in accordance with the provisions of GB3565-1993.
(3) electric cars should be equipped with a headlight and reflector before and after reflector, side reflector, should be returned to its port after device installed.
(4) the installation of electrical systems in place, the correct polarity, the system of electrical installations should comply with the requirements of GB3565-1993. Current electrical wiring should be adapted to ensure that electrical safety can * ride.
(5) of the electrical system to take water-resistant measures, the system should not be used for exposed wiring, and electrical parts of the body shell should not be charged, the insulation resistance value should be not less than 2MΩ.
(6) of the battery electric bicycle should be a good seal. Under normal conditions, the installation location, charge, discharge, when there should be no leakage of fluid phenomena. The nominal battery voltage should be not more than 48V.
(7) electric bicycle brake power devices should be in the brake should be able to automatically cut off the power first.
(8) electric bicycle controller should have the under-voltage, over-current protection function and short-circuit device. Riding in the electric, the speed should be stable.
(C) vehicle assembly requirements
(1) electric bike models require assembly should not be installed the wrong equipment and leakage.
(2) electric bicycle fastening the fasteners should be in place, the rotating parts should be flexible operation.
(3) of the symmetric components in the frame center should be symmetrical face can not be significantly skewed.
(4) variable-speed devices and the braking system should be fitted correctly, flexible manipulation.
(5) Electric Bicycle Fixed pieces of moving parts and does not allow grazing.
(6) radial rim, beating the volume of a round face, with a rim前后轮*, frame-ping, Li * on both sides of space relative deviation, relative deviation前后轮center surface are consistent with the provisions of GB/T3566-1993.
(D) the appearance of vehicle requirements
(1) Electric Bicycle parts of the exposed surface should be clean, no dirt, no rust, trademarks, decals should be complete, clear, correct position.
(2) electric vehicle plastic parts of the color of the surface should be uniform, non-obvious edge, scratch, crack and sag.
(3) of the plating over the exposed parts in line with the provisions of QB/T1217-1991.
(4) over the exposed parts of the paint in line with the provisions of QB/T1218-1991.
(5) pieces of aluminum alloy exposed in line with the provisions of QB/T1284-1995.
(E) electric vehicle is subject to 100km cycling road test
During the trial process can not occur in all parts of the broken vehicle and electrical control system is damaged or invalid parts. Cycling can not afford to lose its electrical function.
(Vi) electric cars must be manual and have the following
(1) read the manual carefully to understand the performance of electric bike before, do not use electric bicycles, not to lend will not manipulate people riding electric bike.
(2) of the horizontal tubes, the risers, saddles, saddle tube and wheel torque fasteners should be tightened Recommended: should be noted that the riser pipe and the saddle of the safety line.
(3) parts lubrication, lubrication oil lubrication cycle and recommended.
(4) right up the chain tight and adjustment method.
(5) the adjustment of brakes and brake Paper on the proposed change, pay attention to rain, snow riding should increase the braking distance.
(6) electric motors, controllers, batteries and maintenance of the correct method to use.
(7) the correct charger, the safe use of the method.
(8) GB/17761-1999 standards in Appendix A (the standard in Appendix) the technical parameters and performance indicators.
Second, the use of electric cars Notes
(A) must comply with operating requirements for electric bikes.
(B) the design standards of electric vehicles for load 75kg, over 90kg when the load, the battery and motor will be damaged.
(C) a long time the battery can not be shelved, shelved charge at least once a month. After cycling the battery discharge must be kept fully charged, it will be a great impact on battery life, will cause serious end-of-life battery.
(D) When the power is exhausted, the system will automatically power off. However, after power off, battery and counter-dancing's "virtual" voltage (reactive power and voltage), then must be recharged after use, otherwise it will create over discharge the battery, which will damage the battery can not be repaired.
(E) electric bicycle trip mileage continued 40-50km. The actual trip mileage continued use will be affected by many factors (such as frequent brake, start, road surfaces, the temperature is too low, on steep slopes, wind speed and under-inflated tires, heavy load) the impact.
(F) attention to the front of the display instrument. Power to open, the electric vehicle can ride at a state, a red LED power indicator light, while green, yellow LED power indicator light, with power cycling, when the green light, yellow light is off, that is about to run out of battery power, at the moment electric ride should stop as soon as possible to the battery charge.
(Vii) pre-riding all the preparatory work must be ready to ensure ride safety.
(1) get off the ground, sliding on and off is prohibited in order to ensure the safety of users.
(2) on the car before opening the power lock switch, and get off before the power lock-off switch.
(3) adjusting the saddle and handlebar height, saddle attention may not be exposed riser pipe and the safety line.
(4) should be slow to speed up cycling. From 0-20km / h, acceleration time is not less than 10S, in order to maintain smooth traffic.
(5) to minimize the number of start. Rapid economic growth of the car (the most power to speed) is generally 16-18km / h.
(6) attention to the braking distance when the ride is generally 4m, the rain increased to double the braking distance.
(H) the horizontal pipe, the riser of the tightened torque for the 16-18N.m.
(I) saddle, saddle tightened torque tube fasteners for the 18-20N.m.
(J) torque for fastening the rear 40-45N.m; front fastening torque for the 18-20N.m.
(K) before the gate skin wheel should be parallel surface pressure, the level of consistency. Paper gates of the space and the wheel is not more than 3mm; brake tightness to grip the handle away from the gate to be able to check the appropriate 10mm. Not the brake, the brake and the skin may not be any part of the wheel contact, gate Paper obvious wear and tear should be replaced in time to avoid injury Rim.
(12) should be elastic spokes, chains grazing may not occur with the body. Adjustment, adjustable rear and the central axis of the distance from the chain up tight control in the 10-15mm.
(Xiii) the prohibition of lubricating rear.
(Xiv) to the appropriate tire pressure, caused by excessive deformation of aluminum circles; low crack caused by tire and inner tube bite; so that inner tube leakage.
(15) in charge should pay attention to:
(1) First, insert the battery charger output of the charging socket and then connect the power input AC 220V.
(2) red charging indicator light on the charger that the normal charge. Fully charged before the green indicator light, green light and then 1-3 hours for the best filling.
(3) finished first unplug the charger's AC power plug, then unplug and plug the battery connections.
(4) does not prohibit the charging, the time will be empty charger connected to the AC power on.
(5) can take to recharge the battery box can also be recharged in the vehicle directly.
(6) If the box had to recharge the battery, charge the battery box back into the end, we have to lock up, the battery box to prevent power outages caused by the phenomenon of loosening.
(7) directly in the vehicle when charging is prohibited to open the power supply electric bicycle lock, to prevent burning charger.
(8) charging the surrounding environment should be ventilation, no fire, be sure to use consistent with the configuration of the charger, the demolition of the battery box is strictly prohibited without permission.
(9) charger work on a child to reach in order to avoid the risk.
(10) light using light to avoid shock release.
(16) years and as far as possible to prevent the motor started, riding the best first human motor starting up again so as to avoid a zero start, the impact of too much current the battery, electrical and machinery life.
(17) should ride on rainy days to prevent the controller and motor in water, caused by short circuit damage.
(18) climbing, on the bridge, the wind speed and great battery-powered flow through the impact of motor and battery life, the best human-assisted riding at this time.
Third, the electric bicycle maintenance
(A) the maintenance of electrical and maintenance
(1) vehicle is sold prior to installation and commissioning to the best state, in use, please do not arbitrarily removable appliances and related components. Found that when riding transmission components such as the issue of abnormal sound, electricity and other unusual circumstances do not work, should be invited to professional maintenance repair division.
(2) motor are not required to adjust the normal use or maintenance, just some clean work surface to dust. Not to add components in the transmission oil.
(B) the maintenance of batteries and maintenance
(1) When the instrument panel red LED lights when the voltage that power into the hunger zone, should be charging. Charge will be timely to extend the battery life greatly. A day on the battery is fully charged, each charging time should be 8-12 hours. At any time to allow the battery to maintain state of abundance, of great benefit to their life. If after riding a timely charge, will be a great impact on battery life. May result in severe end-of-life battery.
(2) electric bike starts, should be slow to accelerate; in a larger gradient of the road and moving against the wind, it is best able to push enough support to avoid high-current discharge batteries to extend battery and motor life. Electrical components and to avoid burnout.
(3) long-term battery when not in use should be kept fully charged, and be not less than every three months to conduct a supplementary 24-hour charge.
(4) Rechargeable batteries should be in circulation in the air environment. * To avoid a nearby fire source, rechargeable battery pack when it would be preferable to remove in order to facilitate heat dissipation.
(5) batteries in the best working environment temperature
15 ℃ -40 ℃. In this temperature range, the battery will have an impact on the normal work.
(6) can not short-circuit the battery positive and negative side to avoid danger.
(7) can only use the manufacturers provide a dedicated charger for charging.
(8) battery is a special battery. Please do not as a power source other than electric bicycle use, so as to avoid battery damage.
(9) can not use organic solvents to clean the battery case. Accidents involving fires, fire can not use carbon dioxide, and carbon tetrachloride should be used like a fire extinguisher.
(10) with group electrical failure if, please sent to manufacturers or authorized and properly handle relevant agencies. Please do not arbitrarily discarded in order to avoid environmental pollution.
(11) ambient temperature higher than 40 ℃ or lower than -10 ℃, the battery life will be shortened. So when the summer heat, the battery should avoid direct sun. Low temperature in winter, the batteries should be stored indoors, and indoors for recharging. Battery fully charged, the charge should be extended for a further 2 hours.
(12) ambient temperature at -10 ℃, the battery can only produce 60% of electricity consumption. Therefore, the full power of winter mileage than a summer full of power to reduce a lot of mileage. Winter driving in the electric power when traveling for a good pedal.
(13) battery is a consumable, battery life is limited. Battery end-of-life period should be based on mileage full power can only be achieved once the state (25Km) for assessment of the half. That is, a fully charged mileage at less than 13Km termination of battery life, batteries should be replaced with new ones.
(14) summer electric vehicles will be prohibited on a long time exposure under the scorching sun.
(C) the maintenance and maintenance controllers
Controller in the electric bike has been factory adjusted to the best condition. If riding when an electrical malfunction or loss of control over the phenomenon of non-professional maintenance personnel can only be on the cable, connector inspection, if the fault can not be ruled out immediately and professional maintenance of contact points, or manufacturers.
已赞过
已踩过<
评论
收起
你对这个回答的评价是？
苏州杭叉叉车
2024-10-30 广告
一、充电注意事项 1、充电过程中，不要拔去电瓶插头或关断电源开关，否则插头和电器元件将被损坏。只有将充电机关闭后，方可拔去插头。搬运车。 2、配置电解液时，切勿将水倒入硫酸之中，以免液面温度突然升高，沸腾的酸滴飞溅伤人。 3、在充电过程中蓄...
点击进入详情页
本回答由苏州杭叉叉车提供
推荐律师服务：
若未解决您的问题，请您详细描述您的问题，通过百度律临进行免费专业咨询
