如何用C语言控制计算机串口 105
本人要用计算机控制串口的数据传输。跪求！！！本人采用VC6.0编译器本人要求只要发送一个字节与接收一个字节就行了是用于单片机的串口通信。程序越简单越好最好有现成的程序供参...
本人要用计算机控制串口的数据传输。跪求！！！ 本人采用VC6.0编译器
本人要求只要发送一个字节与接收一个字节就行了 是用于单片机的串口通信。
程序越简单越好 最好有现成的程序供参考 。。 小的不胜感激。。。。 在线等待。。 展开
本人要求只要发送一个字节与接收一个字节就行了 是用于单片机的串口通信。
程序越简单越好 最好有现成的程序供参考 。。 小的不胜感激。。。。 在线等待。。 展开
展开全部
基本方法是使用CreateFile来建立一个串口文件，然后用overlap的方式进行读写
#define SERAIL_PORT_BUF_MAX (1024*8)
typedef HRESULT (*PFN_CMD_PARSE_DATA)(HANDLE hParseApp, LPCSTR szRspCmd, int nCmdLen);
class CUsbSrvApp// : public CWinApp
{
public:
CUsbSrvApp();
~CUsbSrvApp();
BOOL OnSendData(const char *szBuf, int nLen);// 发送数据
int ComConnect(CString strPort); // 连接COM口
HANDLE OpenComPort(CString strPort, int nBaudRate, int nDataBits, int nStopBits, int nParity, int nFlowCtrlType); // 打开串口
void Close(); // 关闭串口
HANDLE m_hCom;
BOOL m_bConnected;
OVERLAPPED m_OverlappedRead;
OVERLAPPED m_OverlappedWrite;
CWinThread *m_pThread;
PFN_CMD_PARSE_DATA m_pRspCmdFunc; // 用来处理接受数据的CALLBACK
HANDLE m_hParseApp;
};
CUsbSrvApp::CUsbSrvApp()
{
// TODO: add construction code here,
// Place all significant initialization in InitInstance
m_bConnected = false;
m_hCom = NULL;
m_pRspCmdFunc = NULL;
}
CUsbSrvApp::~CUsbSrvApp()
{
}
//打开串口通信，并返回串口句柄
HANDLE CUsbSrvApp::OpenComPort(CString strPortName,
int nBaudRate,
int nDataBits,
int nStopBits,
int nParity,
int nFlowCtrlType)
{
DCB dcb;
COMMTIMEOUTS CommTimeOuts ;
COMMCONFIG ComConfig;
HANDLE hComPort;
CString strPort;
strPort.Format("\\\\.\\%s",strPortName); // COM口的文件名应该是 \\.\COMXX
//打开窗口其实就是创建一个文件
hComPort = CreateFile(strPort,
GENERIC_READ | GENERIC_WRITE,
FILE_SHARE_READ | FILE_SHARE_WRITE,
NULL,
OPEN_EXISTING,
FILE_ATTRIBUTE_NORMAL|FILE_FLAG_OVERLAPPED,
NULL);
if (INVALID_HANDLE_VALUE == hComPort)
return INVALID_HANDLE_VALUE;
// 设置一些COM口通讯参数和OVERLAP
CommTimeOuts.ReadIntervalTimeout = -1;
CommTimeOuts.ReadTotalTimeoutConstant = 0;
CommTimeOuts.ReadTotalTimeoutMultiplier = 0;
CommTimeOuts.WriteTotalTimeoutConstant = 0;
CommTimeOuts.WriteTotalTimeoutMultiplier = 0x1388;
SetCommTimeouts( m_hCom, &CommTimeOuts ) ;
SetDefaultCommConfig(strPortName, &ComConfig, sizeof(COMMCONFIG));
GetCommState(m_hCom, &dcb ) ;
dcb.BaudRate = nBaudRate;
dcb.ByteSize = nDataBits;
dcb.StopBits = nStopBits;
dcb.fParity = (NOPARITY != nParity);
dcb.Parity = nParity;
//set the receive char
dcb.EvtChar = 0x0D;
switch(nFlowCtrlType)
{
case 0: //no flow control
break;
case 1://HARD_FLOW_CTRL:
dcb.fOutxCtsFlow = TRUE;
dcb.fOutxDsrFlow = TRUE;
dcb.fDtrControl = DTR_CONTROL_DISABLE;
dcb.fDsrSensitivity = TRUE;
dcb.fRtsControl = RTS_CONTROL_TOGGLE;
break;
case 2://SOFT_FLOW_CTRL:
dcb.fOutX = TRUE;
dcb.fInX = TRUE;
break;
}
BuildCommDCB(_T("baud=115200 parity=N data=8 stop=1"),&dcb);
SetCommState(hComPort, &dcb ) ;
SetCommMask(hComPort, 0);
SetCommMask(hComPort, EV_RXCHAR|EV_CTS|EV_DSR|EV_RLSD|EV_RING);
SetupComm( hComPort, SERAIL_PORT_BUF_MAX,SERAIL_PORT_BUF_MAX) ;
//clear read and write buffer
PurgeComm( hComPort, PURGE_TXABORT | PURGE_RXABORT | PURGE_TXCLEAR | PURGE_RXCLEAR );
return hComPort;
}
void CUsbSrvApp::Close()
{
if(m_bConnected)
{
m_bConnected = false;
CloseHandle(m_hCom);
m_hCom = NULL;
}
}
// 这个线程是监视串口数据，一旦有数据则读取并调用CALLBACK通知客户端
UINT ReceiveComData(LPVOID pParam)
{
CUsbSrvApp *pUsbSrv = (CUsbSrvApp *)pParam;
HANDLE hComPort = pUsbSrv->m_hCom;
DWORD dwEvtMask=0;
DWORD dwErrorFlags;
SetCommMask( hComPort, EV_RXCHAR);
OVERLAPPED osRead;
osRead.hEvent = CreateEvent(NULL,FALSE,FALSE,NULL);
DWORD dwTransfer = 0;
while(pUsbSrv->m_bConnected)
{
if( !WaitCommEvent( hComPort, &dwEvtMask,&osRead))
{
if( GetLastError()== ERROR_IO_PENDING)
{
WaitForSingleObject(osRead.hEvent, INFINITE);
if(dwEvtMask&EV_RXCHAR==EV_RXCHAR)
{
COMSTAT ComStat={0} ;
DWORD dwReadLen = 0;
DWORD dwBytesRead = 0;
DWORD dwTotalLen = 0;
ClearCommError(hComPort, &dwErrorFlags, &ComStat );
dwTotalLen = ComStat.cbInQue;
dwReadLen = (SERAIL_PORT_BUF_MAX > dwTotalLen)?dwTotalLen:SERAIL_PORT_BUF_MAX;
BYTE *pBuf = new BYTE[dwTotalLen+1];
memset(pBuf, 0 , dwTotalLen+1);
DWORD nReadBufLen=0;
while(dwTotalLen>0)
{
if(FALSE == ReadFile( hComPort, pBuf+nReadBufLen,dwReadLen, &dwBytesRead,&pUsbSrv->m_OverlappedRead))
{
if(GetLastError() == ERROR_IO_PENDING)
{
GetOverlappedResult(hComPort,&osRead, &dwTransfer, TRUE );
}
break;
}
nReadBufLen +=dwBytesRead;
dwTotalLen -=dwBytesRead;
dwReadLen -= dwBytesRead;
dwReadLen = (SERAIL_PORT_BUF_MAX>dwReadLen)?dwReadLen:SERAIL_PORT_BUF_MAX;
}
if(pUsbSrv->m_pRspCmdFunc!=NULL&&nReadBufLen!=0)
{
pUsbSrv->m_pRspCmdFunc(pUsbSrv->m_hParseApp, (char*)pBuf,nReadBufLen);
}
delete pBuf;
ClearCommError(hComPort, &dwErrorFlags, &ComStat );
int len =0;//= m_retList.GetSize();
}//endif if(dwEvtMask&EV_RXCHAR==EV_RXCHAR)
}//endif if( GetLastError()== ERROR_IO_PENDING)
}//endif if( !WaitCommEvent( hComPort, &dwEvtMask,&o))
else
{
if(GetLastError() == ERROR_IO_PENDING) {
GetOverlappedResult(hComPort, &osRead, &dwTransfer, TRUE ); // sleep thread
}
}
Sleep(1);
} //endwhile while(m_bConnected)
return 0;
}
int CUsbSrvApp::ComConnect(CString strPort)
{
int nBaudRate = 115200;
int nDataBits = 8;
int nStopBits = 1;
int nParity = 0;
int nFlowCtrl = 1;
if (NULL != m_hCom || m_bConnected)
{
return 0;
}
m_hCom = OpenComPort(strPort,nBaudRate,nDataBits,nStopBits,nParity,nFlowCtrl);
if( INVALID_HANDLE_VALUE == m_hCom)
{
m_hCom = NULL;
return 0;
}
memset( &m_OverlappedRead, 0, sizeof( OVERLAPPED ) );
memset( &m_OverlappedWrite, 0, sizeof( OVERLAPPED ) );
m_OverlappedRead.hEvent = CreateEvent( NULL, TRUE, FALSE, NULL );
m_OverlappedWrite.hEvent = CreateEvent( NULL, TRUE, FALSE, NULL );
m_pThread = AfxBeginThread( ReceiveComData,(void*)this,THREAD_PRIORITY_NORMAL,0,CREATE_SUSPENDED ,NULL );
if( NULL == m_pThread )
{
CloseHandle( m_hCom );
m_hCom = NULL;
return FALSE;
}
else
{
m_bConnected = TRUE;
m_pThread->ResumeThread( );
}
return TRUE;
}
int CUsbSrvApp::OnSendData(const char *szBuf, int nLen)
{
BOOL bWriteStat;
BOOL bWrite = TRUE;
DWORD dwBytesWrite = 0;
DWORD dwBytesWritten = 0;
int dwByteswrittenTotal = 0;
if (NULL == m_hCom)
return 0;
int nSentTimes=0;
while(dwByteswrittenTotal<nLen&&nSentTimes<10)
{
nSentTimes++;
dwBytesWrite = nLen-dwByteswrittenTotal;
bWriteStat = WriteFile( m_hCom, szBuf+dwByteswrittenTotal, dwBytesWrite, &dwBytesWritten, &m_OverlappedWrite );
if( !bWriteStat)
{
if ( GetLastError() == ERROR_IO_PENDING )
{
dwBytesWritten = 0;
bWrite = FALSE;
}
}
if (!bWrite)
{
bWrite = TRUE;
bWriteStat = GetOverlappedResult(m_hCom, // Handle to COMM port
&m_OverlappedWrite, // Overlapped structure
&dwBytesWritten, // Stores number of bytes sent
TRUE); // Wait flag
//deal with the error code
}
dwByteswrittenTotal += dwBytesWritten;
}
if(dwByteswrittenTotal<nLen)
return 0;
else
return 1;
}
#define SERAIL_PORT_BUF_MAX (1024*8)
typedef HRESULT (*PFN_CMD_PARSE_DATA)(HANDLE hParseApp, LPCSTR szRspCmd, int nCmdLen);
class CUsbSrvApp// : public CWinApp
{
public:
CUsbSrvApp();
~CUsbSrvApp();
BOOL OnSendData(const char *szBuf, int nLen);// 发送数据
int ComConnect(CString strPort); // 连接COM口
HANDLE OpenComPort(CString strPort, int nBaudRate, int nDataBits, int nStopBits, int nParity, int nFlowCtrlType); // 打开串口
void Close(); // 关闭串口
HANDLE m_hCom;
BOOL m_bConnected;
OVERLAPPED m_OverlappedRead;
OVERLAPPED m_OverlappedWrite;
CWinThread *m_pThread;
PFN_CMD_PARSE_DATA m_pRspCmdFunc; // 用来处理接受数据的CALLBACK
HANDLE m_hParseApp;
};
CUsbSrvApp::CUsbSrvApp()
{
// TODO: add construction code here,
// Place all significant initialization in InitInstance
m_bConnected = false;
m_hCom = NULL;
m_pRspCmdFunc = NULL;
}
CUsbSrvApp::~CUsbSrvApp()
{
}
//打开串口通信，并返回串口句柄
HANDLE CUsbSrvApp::OpenComPort(CString strPortName,
int nBaudRate,
int nDataBits,
int nStopBits,
int nParity,
int nFlowCtrlType)
{
DCB dcb;
COMMTIMEOUTS CommTimeOuts ;
COMMCONFIG ComConfig;
HANDLE hComPort;
CString strPort;
strPort.Format("\\\\.\\%s",strPortName); // COM口的文件名应该是 \\.\COMXX
//打开窗口其实就是创建一个文件
hComPort = CreateFile(strPort,
GENERIC_READ | GENERIC_WRITE,
FILE_SHARE_READ | FILE_SHARE_WRITE,
NULL,
OPEN_EXISTING,
FILE_ATTRIBUTE_NORMAL|FILE_FLAG_OVERLAPPED,
NULL);
if (INVALID_HANDLE_VALUE == hComPort)
return INVALID_HANDLE_VALUE;
// 设置一些COM口通讯参数和OVERLAP
CommTimeOuts.ReadIntervalTimeout = -1;
CommTimeOuts.ReadTotalTimeoutConstant = 0;
CommTimeOuts.ReadTotalTimeoutMultiplier = 0;
CommTimeOuts.WriteTotalTimeoutConstant = 0;
CommTimeOuts.WriteTotalTimeoutMultiplier = 0x1388;
SetCommTimeouts( m_hCom, &CommTimeOuts ) ;
SetDefaultCommConfig(strPortName, &ComConfig, sizeof(COMMCONFIG));
GetCommState(m_hCom, &dcb ) ;
dcb.BaudRate = nBaudRate;
dcb.ByteSize = nDataBits;
dcb.StopBits = nStopBits;
dcb.fParity = (NOPARITY != nParity);
dcb.Parity = nParity;
//set the receive char
dcb.EvtChar = 0x0D;
switch(nFlowCtrlType)
{
case 0: //no flow control
break;
case 1://HARD_FLOW_CTRL:
dcb.fOutxCtsFlow = TRUE;
dcb.fOutxDsrFlow = TRUE;
dcb.fDtrControl = DTR_CONTROL_DISABLE;
dcb.fDsrSensitivity = TRUE;
dcb.fRtsControl = RTS_CONTROL_TOGGLE;
break;
case 2://SOFT_FLOW_CTRL:
dcb.fOutX = TRUE;
dcb.fInX = TRUE;
break;
}
BuildCommDCB(_T("baud=115200 parity=N data=8 stop=1"),&dcb);
SetCommState(hComPort, &dcb ) ;
SetCommMask(hComPort, 0);
SetCommMask(hComPort, EV_RXCHAR|EV_CTS|EV_DSR|EV_RLSD|EV_RING);
SetupComm( hComPort, SERAIL_PORT_BUF_MAX,SERAIL_PORT_BUF_MAX) ;
//clear read and write buffer
PurgeComm( hComPort, PURGE_TXABORT | PURGE_RXABORT | PURGE_TXCLEAR | PURGE_RXCLEAR );
return hComPort;
}
void CUsbSrvApp::Close()
{
if(m_bConnected)
{
m_bConnected = false;
CloseHandle(m_hCom);
m_hCom = NULL;
}
}
// 这个线程是监视串口数据，一旦有数据则读取并调用CALLBACK通知客户端
UINT ReceiveComData(LPVOID pParam)
{
CUsbSrvApp *pUsbSrv = (CUsbSrvApp *)pParam;
HANDLE hComPort = pUsbSrv->m_hCom;
DWORD dwEvtMask=0;
DWORD dwErrorFlags;
SetCommMask( hComPort, EV_RXCHAR);
OVERLAPPED osRead;
osRead.hEvent = CreateEvent(NULL,FALSE,FALSE,NULL);
DWORD dwTransfer = 0;
while(pUsbSrv->m_bConnected)
{
if( !WaitCommEvent( hComPort, &dwEvtMask,&osRead))
{
if( GetLastError()== ERROR_IO_PENDING)
{
WaitForSingleObject(osRead.hEvent, INFINITE);
if(dwEvtMask&EV_RXCHAR==EV_RXCHAR)
{
COMSTAT ComStat={0} ;
DWORD dwReadLen = 0;
DWORD dwBytesRead = 0;
DWORD dwTotalLen = 0;
ClearCommError(hComPort, &dwErrorFlags, &ComStat );
dwTotalLen = ComStat.cbInQue;
dwReadLen = (SERAIL_PORT_BUF_MAX > dwTotalLen)?dwTotalLen:SERAIL_PORT_BUF_MAX;
BYTE *pBuf = new BYTE[dwTotalLen+1];
memset(pBuf, 0 , dwTotalLen+1);
DWORD nReadBufLen=0;
while(dwTotalLen>0)
{
if(FALSE == ReadFile( hComPort, pBuf+nReadBufLen,dwReadLen, &dwBytesRead,&pUsbSrv->m_OverlappedRead))
{
if(GetLastError() == ERROR_IO_PENDING)
{
GetOverlappedResult(hComPort,&osRead, &dwTransfer, TRUE );
}
break;
}
nReadBufLen +=dwBytesRead;
dwTotalLen -=dwBytesRead;
dwReadLen -= dwBytesRead;
dwReadLen = (SERAIL_PORT_BUF_MAX>dwReadLen)?dwReadLen:SERAIL_PORT_BUF_MAX;
}
if(pUsbSrv->m_pRspCmdFunc!=NULL&&nReadBufLen!=0)
{
pUsbSrv->m_pRspCmdFunc(pUsbSrv->m_hParseApp, (char*)pBuf,nReadBufLen);
}
delete pBuf;
ClearCommError(hComPort, &dwErrorFlags, &ComStat );
int len =0;//= m_retList.GetSize();
}//endif if(dwEvtMask&EV_RXCHAR==EV_RXCHAR)
}//endif if( GetLastError()== ERROR_IO_PENDING)
}//endif if( !WaitCommEvent( hComPort, &dwEvtMask,&o))
else
{
if(GetLastError() == ERROR_IO_PENDING) {
GetOverlappedResult(hComPort, &osRead, &dwTransfer, TRUE ); // sleep thread
}
}
Sleep(1);
} //endwhile while(m_bConnected)
return 0;
}
int CUsbSrvApp::ComConnect(CString strPort)
{
int nBaudRate = 115200;
int nDataBits = 8;
int nStopBits = 1;
int nParity = 0;
int nFlowCtrl = 1;
if (NULL != m_hCom || m_bConnected)
{
return 0;
}
m_hCom = OpenComPort(strPort,nBaudRate,nDataBits,nStopBits,nParity,nFlowCtrl);
if( INVALID_HANDLE_VALUE == m_hCom)
{
m_hCom = NULL;
return 0;
}
memset( &m_OverlappedRead, 0, sizeof( OVERLAPPED ) );
memset( &m_OverlappedWrite, 0, sizeof( OVERLAPPED ) );
m_OverlappedRead.hEvent = CreateEvent( NULL, TRUE, FALSE, NULL );
m_OverlappedWrite.hEvent = CreateEvent( NULL, TRUE, FALSE, NULL );
m_pThread = AfxBeginThread( ReceiveComData,(void*)this,THREAD_PRIORITY_NORMAL,0,CREATE_SUSPENDED ,NULL );
if( NULL == m_pThread )
{
CloseHandle( m_hCom );
m_hCom = NULL;
return FALSE;
}
else
{
m_bConnected = TRUE;
m_pThread->ResumeThread( );
}
return TRUE;
}
int CUsbSrvApp::OnSendData(const char *szBuf, int nLen)
{
BOOL bWriteStat;
BOOL bWrite = TRUE;
DWORD dwBytesWrite = 0;
DWORD dwBytesWritten = 0;
int dwByteswrittenTotal = 0;
if (NULL == m_hCom)
return 0;
int nSentTimes=0;
while(dwByteswrittenTotal<nLen&&nSentTimes<10)
{
nSentTimes++;
dwBytesWrite = nLen-dwByteswrittenTotal;
bWriteStat = WriteFile( m_hCom, szBuf+dwByteswrittenTotal, dwBytesWrite, &dwBytesWritten, &m_OverlappedWrite );
if( !bWriteStat)
{
if ( GetLastError() == ERROR_IO_PENDING )
{
dwBytesWritten = 0;
bWrite = FALSE;
}
}
if (!bWrite)
{
bWrite = TRUE;
bWriteStat = GetOverlappedResult(m_hCom, // Handle to COMM port
&m_OverlappedWrite, // Overlapped structure
&dwBytesWritten, // Stores number of bytes sent
TRUE); // Wait flag
//deal with the error code
}
dwByteswrittenTotal += dwBytesWritten;
}
if(dwByteswrittenTotal<nLen)
return 0;
else
return 1;
}
已赞过
已踩过<
评论
收起
你对这个回答的评价是？
展开全部
基本方法是使用CreateFile来建立一个串口文件，然后用overlap的方式进行读写
#define SERAIL_PORT_BUF_MAX (1024*8)
typedef HRESULT (*PFN_CMD_PARSE_DATA)(HANDLE hParseApp, LPCSTR szRspCmd, int nCmdLen);
class CUsbSrvApp// : public CWinApp
{
public:
CUsbSrvApp();
~CUsbSrvApp();
BOOL OnSendData(const char *szBuf, int nLen);// 发送数据
int ComConnect(CString strPort); // 连接COM口
HANDLE OpenComPort(CString strPort, int nBaudRate, int nDataBits, int nStopBits, int nParity, int nFlowCtrlType); // 打开串口
void Close(); // 关闭串口
HANDLE m_hCom;
BOOL m_bConnected;
OVERLAPPED m_OverlappedRead;
OVERLAPPED m_OverlappedWrite;
CWinThread *m_pThread;
PFN_CMD_PARSE_DATA m_pRspCmdFunc; // 用来处理接受数据的CALLBACK
HANDLE m_hParseApp;
};
CUsbSrvApp::CUsbSrvApp()
{
// TODO: add construction code here,
// Place all significant initialization in InitInstance
m_bConnected = false;
m_hCom = NULL;
m_pRspCmdFunc = NULL;
}
CUsbSrvApp::~CUsbSrvApp()
{
}
//打开串口通信，并返回串口句柄
HANDLE CUsbSrvApp::OpenComPort(CString strPortName,
int nBaudRate,
int nDataBits,
int nStopBits,
int nParity,
int nFlowCtrlType)
{
DCB dcb;
COMMTIMEOUTS CommTimeOuts ;
COMMCONFIG ComConfig;
HANDLE hComPort;
CString strPort;
strPort.Format("\\\\.\\%s",strPortName); // COM口的文件名应该是 \\.\COMXX
//打开窗口其实就是创建一个文件
hComPort = CreateFile(strPort,
GENERIC_READ | GENERIC_WRITE,
FILE_SHARE_READ | FILE_SHARE_WRITE,
NULL,
OPEN_EXISTING,
FILE_ATTRIBUTE_NORMAL|FILE_FLAG_OVERLAPPED,
NULL);
if (INVALID_HANDLE_VALUE == hComPort)
return INVALID_HANDLE_VALUE;
// 设置一些COM口通讯参数和OVERLAP
CommTimeOuts.ReadIntervalTimeout = -1;
CommTimeOuts.ReadTotalTimeoutConstant = 0;
CommTimeOuts.ReadTotalTimeoutMultiplier = 0;
CommTimeOuts.WriteTotalTimeoutConstant = 0;
CommTimeOuts.WriteTotalTimeoutMultiplier = 0x1388;
SetCommTimeouts( m_hCom, &CommTimeOuts ) ;
SetDefaultCommConfig(strPortName, &ComConfig, sizeof(COMMCONFIG));
GetCommState(m_hCom, &dcb ) ;
dcb.BaudRate = nBaudRate;
dcb.ByteSize = nDataBits;
dcb.StopBits = nStopBits;
dcb.fParity = (NOPARITY != nParity);
dcb.Parity = nParity;
//set the receive char
dcb.EvtChar = 0x0D;
switch(nFlowCtrlType)
{
case 0: //no flow control
break;
case 1://HARD_FLOW_CTRL:
dcb.fOutxCtsFlow = TRUE;
dcb.fOutxDsrFlow = TRUE;
dcb.fDtrControl = DTR_CONTROL_DISABLE;
dcb.fDsrSensitivity = TRUE;
dcb.fRtsControl = RTS_CONTROL_TOGGLE;
break;
case 2://SOFT_FLOW_CTRL:
dcb.fOutX = TRUE;
dcb.fInX = TRUE;
break;
}
BuildCommDCB(_T("baud=115200 parity=N data=8 stop=1"),&dcb);
SetCommState(hComPort, &dcb ) ;
SetCommMask(hComPort, 0);
SetCommMask(hComPort, EV_RXCHAR|EV_CTS|EV_DSR|EV_RLSD|EV_RING);
SetupComm( hComPort, SERAIL_PORT_BUF_MAX,SERAIL_PORT_BUF_MAX) ;
//clear read and write buffer
PurgeComm( hComPort, PURGE_TXABORT | PURGE_RXABORT | PURGE_TXCLEAR | PURGE_RXCLEAR );
return hComPort;
}
void CUsbSrvApp::Close()
{
if(m_bConnected)
{
m_bConnected = false;
CloseHandle(m_hCom);
m_hCom = NULL;
}
}
// 这个线程是监视串口数据，一旦有数据则读取并调用CALLBACK通知客户端
UINT ReceiveComData(LPVOID pParam)
{
CUsbSrvApp *pUsbSrv = (CUsbSrvApp *)pParam;
HANDLE hComPort = pUsbSrv->m_hCom;
DWORD dwEvtMask=0;
DWORD dwErrorFlags;
SetCommMask( hComPort, EV_RXCHAR);
OVERLAPPED osRead;
osRead.hEvent = CreateEvent(NULL,FALSE,FALSE,NULL);
DWORD dwTransfer = 0;
while(pUsbSrv->m_bConnected)
{
if( !WaitCommEvent( hComPort, &dwEvtMask,&osRead))
{
if( GetLastError()== ERROR_IO_PENDING)
{
WaitForSingleObject(osRead.hEvent, INFINITE);
if(dwEvtMask&EV_RXCHAR==EV_RXCHAR)
{
COMSTAT ComStat={0} ;
DWORD dwReadLen = 0;
DWORD dwBytesRead = 0;
DWORD dwTotalLen = 0;
ClearCommError(hComPort, &dwErrorFlags, &ComStat );
dwTotalLen = ComStat.cbInQue;
dwReadLen = (SERAIL_PORT_BUF_MAX > dwTotalLen)?dwTotalLen:SERAIL_PORT_BUF_MAX;
BYTE *pBuf = new BYTE[dwTotalLen+1];
memset(pBuf, 0 , dwTotalLen+1);
DWORD nReadBufLen=0;
while(dwTotalLen>0)
{
if(FALSE == ReadFile( hComPort, pBuf+nReadBufLen,dwReadLen, &dwBytesRead,&pUsbSrv->m_OverlappedRead))
{
if(GetLastError() == ERROR_IO_PENDING)
{
GetOverlappedResult(hComPort,&osRead, &dwTransfer, TRUE );
}
break;
}
nReadBufLen +=dwBytesRead;
dwTotalLen -=dwBytesRead;
dwReadLen -= dwBytesRead;
dwReadLen = (SERAIL_PORT_BUF_MAX>dwReadLen)?dwReadLen:SERAIL_PORT_BUF_MAX;
}
if(pUsbSrv->m_pRspCmdFunc!=NULL&&nReadBufLen!=0)
{
pUsbSrv->m_pRspCmdFunc(pUsbSrv->m_hParseApp, (char*)pBuf,nReadBufLen);
}
delete pBuf;
ClearCommError(hComPort, &dwErrorFlags, &ComStat );
int len =0;//= m_retList.GetSize();
}//endif if(dwEvtMask&EV_RXCHAR==EV_RXCHAR)
}//endif if( GetLastError()== ERROR_IO_PENDING)
}//endif if( !WaitCommEvent( hComPort, &dwEvtMask,&o))
else
{
if(GetLastError() == ERROR_IO_PENDING) {
GetOverlappedResult(hComPort, &osRead, &dwTransfer, TRUE ); // sleep thread
}
}
Sleep(1);
} //endwhile while(m_bConnected)
return 0;
}
int CUsbSrvApp::ComConnect(CString strPort)
{
int nBaudRate = 115200;
int nDataBits = 8;
int nStopBits = 1;
int nParity = 0;
int nFlowCtrl = 1;
if (NULL != m_hCom || m_bConnected)
{
return 0;
}
m_hCom = OpenComPort(strPort,nBaudRate,nDataBits,nStopBits,nParity,nFlowCtrl);
if( INVALID_HANDLE_VALUE == m_hCom)
{
m_hCom = NULL;
return 0;
}
memset( &m_OverlappedRead, 0, sizeof( OVERLAPPED ) );
memset( &m_OverlappedWrite, 0, sizeof( OVERLAPPED ) );
m_OverlappedRead.hEvent = CreateEvent( NULL, TRUE, FALSE, NULL );
m_OverlappedWrite.hEvent = CreateEvent( NULL, TRUE, FALSE, NULL );
m_pThread = AfxBeginThread( ReceiveComData,(void*)this,THREAD_PRIORITY_NORMAL,0,CREATE_SUSPENDED ,NULL );
if( NULL == m_pThread )
{
CloseHandle( m_hCom );
m_hCom = NULL;
return FALSE;
}
else
{
m_bConnected = TRUE;
m_pThread->ResumeThread( );
}
return TRUE;
}
int CUsbSrvApp::OnSendData(const char *szBuf, int nLen)
{
BOOL bWriteStat;
BOOL bWrite = TRUE;
DWORD dwBytesWrite = 0;
DWORD dwBytesWritten = 0;
int dwByteswrittenTotal = 0;
if (NULL == m_hCom)
return 0;
int nSentTimes=0;
while(dwByteswrittenTotal<nLen&&nSentTimes<10)
{
nSentTimes++;
dwBytesWrite = nLen-dwByteswrittenTotal;
bWriteStat = WriteFile( m_hCom, szBuf+dwByteswrittenTotal, dwBytesWrite, &dwBytesWritten, &m_OverlappedWrite );
if( !bWriteStat)
{
if ( GetLastError() == ERROR_IO_PENDING )
{
dwBytesWritten = 0;
bWrite = FALSE;
}
}
if (!bWrite)
{
bWrite = TRUE;
bWriteStat = GetOverlappedResult(m_hCom, // Handle to COMM port
&m_OverlappedWrite, // Overlapped structure
&dwBytesWritten, // Stores number of bytes sent
TRUE); // Wait flag
//deal with the error code
}
dwByteswrittenTotal += dwBytesWritten;
}
if(dwByteswrittenTotal<nLen)
return 0;
else
return 1;
}
#define SERAIL_PORT_BUF_MAX (1024*8)
typedef HRESULT (*PFN_CMD_PARSE_DATA)(HANDLE hParseApp, LPCSTR szRspCmd, int nCmdLen);
class CUsbSrvApp// : public CWinApp
{
public:
CUsbSrvApp();
~CUsbSrvApp();
BOOL OnSendData(const char *szBuf, int nLen);// 发送数据
int ComConnect(CString strPort); // 连接COM口
HANDLE OpenComPort(CString strPort, int nBaudRate, int nDataBits, int nStopBits, int nParity, int nFlowCtrlType); // 打开串口
void Close(); // 关闭串口
HANDLE m_hCom;
BOOL m_bConnected;
OVERLAPPED m_OverlappedRead;
OVERLAPPED m_OverlappedWrite;
CWinThread *m_pThread;
PFN_CMD_PARSE_DATA m_pRspCmdFunc; // 用来处理接受数据的CALLBACK
HANDLE m_hParseApp;
};
CUsbSrvApp::CUsbSrvApp()
{
// TODO: add construction code here,
// Place all significant initialization in InitInstance
m_bConnected = false;
m_hCom = NULL;
m_pRspCmdFunc = NULL;
}
CUsbSrvApp::~CUsbSrvApp()
{
}
//打开串口通信，并返回串口句柄
HANDLE CUsbSrvApp::OpenComPort(CString strPortName,
int nBaudRate,
int nDataBits,
int nStopBits,
int nParity,
int nFlowCtrlType)
{
DCB dcb;
COMMTIMEOUTS CommTimeOuts ;
COMMCONFIG ComConfig;
HANDLE hComPort;
CString strPort;
strPort.Format("\\\\.\\%s",strPortName); // COM口的文件名应该是 \\.\COMXX
//打开窗口其实就是创建一个文件
hComPort = CreateFile(strPort,
GENERIC_READ | GENERIC_WRITE,
FILE_SHARE_READ | FILE_SHARE_WRITE,
NULL,
OPEN_EXISTING,
FILE_ATTRIBUTE_NORMAL|FILE_FLAG_OVERLAPPED,
NULL);
if (INVALID_HANDLE_VALUE == hComPort)
return INVALID_HANDLE_VALUE;
// 设置一些COM口通讯参数和OVERLAP
CommTimeOuts.ReadIntervalTimeout = -1;
CommTimeOuts.ReadTotalTimeoutConstant = 0;
CommTimeOuts.ReadTotalTimeoutMultiplier = 0;
CommTimeOuts.WriteTotalTimeoutConstant = 0;
CommTimeOuts.WriteTotalTimeoutMultiplier = 0x1388;
SetCommTimeouts( m_hCom, &CommTimeOuts ) ;
SetDefaultCommConfig(strPortName, &ComConfig, sizeof(COMMCONFIG));
GetCommState(m_hCom, &dcb ) ;
dcb.BaudRate = nBaudRate;
dcb.ByteSize = nDataBits;
dcb.StopBits = nStopBits;
dcb.fParity = (NOPARITY != nParity);
dcb.Parity = nParity;
//set the receive char
dcb.EvtChar = 0x0D;
switch(nFlowCtrlType)
{
case 0: //no flow control
break;
case 1://HARD_FLOW_CTRL:
dcb.fOutxCtsFlow = TRUE;
dcb.fOutxDsrFlow = TRUE;
dcb.fDtrControl = DTR_CONTROL_DISABLE;
dcb.fDsrSensitivity = TRUE;
dcb.fRtsControl = RTS_CONTROL_TOGGLE;
break;
case 2://SOFT_FLOW_CTRL:
dcb.fOutX = TRUE;
dcb.fInX = TRUE;
break;
}
BuildCommDCB(_T("baud=115200 parity=N data=8 stop=1"),&dcb);
SetCommState(hComPort, &dcb ) ;
SetCommMask(hComPort, 0);
SetCommMask(hComPort, EV_RXCHAR|EV_CTS|EV_DSR|EV_RLSD|EV_RING);
SetupComm( hComPort, SERAIL_PORT_BUF_MAX,SERAIL_PORT_BUF_MAX) ;
//clear read and write buffer
PurgeComm( hComPort, PURGE_TXABORT | PURGE_RXABORT | PURGE_TXCLEAR | PURGE_RXCLEAR );
return hComPort;
}
void CUsbSrvApp::Close()
{
if(m_bConnected)
{
m_bConnected = false;
CloseHandle(m_hCom);
m_hCom = NULL;
}
}
// 这个线程是监视串口数据，一旦有数据则读取并调用CALLBACK通知客户端
UINT ReceiveComData(LPVOID pParam)
{
CUsbSrvApp *pUsbSrv = (CUsbSrvApp *)pParam;
HANDLE hComPort = pUsbSrv->m_hCom;
DWORD dwEvtMask=0;
DWORD dwErrorFlags;
SetCommMask( hComPort, EV_RXCHAR);
OVERLAPPED osRead;
osRead.hEvent = CreateEvent(NULL,FALSE,FALSE,NULL);
DWORD dwTransfer = 0;
while(pUsbSrv->m_bConnected)
{
if( !WaitCommEvent( hComPort, &dwEvtMask,&osRead))
{
if( GetLastError()== ERROR_IO_PENDING)
{
WaitForSingleObject(osRead.hEvent, INFINITE);
if(dwEvtMask&EV_RXCHAR==EV_RXCHAR)
{
COMSTAT ComStat={0} ;
DWORD dwReadLen = 0;
DWORD dwBytesRead = 0;
DWORD dwTotalLen = 0;
ClearCommError(hComPort, &dwErrorFlags, &ComStat );
dwTotalLen = ComStat.cbInQue;
dwReadLen = (SERAIL_PORT_BUF_MAX > dwTotalLen)?dwTotalLen:SERAIL_PORT_BUF_MAX;
BYTE *pBuf = new BYTE[dwTotalLen+1];
memset(pBuf, 0 , dwTotalLen+1);
DWORD nReadBufLen=0;
while(dwTotalLen>0)
{
if(FALSE == ReadFile( hComPort, pBuf+nReadBufLen,dwReadLen, &dwBytesRead,&pUsbSrv->m_OverlappedRead))
{
if(GetLastError() == ERROR_IO_PENDING)
{
GetOverlappedResult(hComPort,&osRead, &dwTransfer, TRUE );
}
break;
}
nReadBufLen +=dwBytesRead;
dwTotalLen -=dwBytesRead;
dwReadLen -= dwBytesRead;
dwReadLen = (SERAIL_PORT_BUF_MAX>dwReadLen)?dwReadLen:SERAIL_PORT_BUF_MAX;
}
if(pUsbSrv->m_pRspCmdFunc!=NULL&&nReadBufLen!=0)
{
pUsbSrv->m_pRspCmdFunc(pUsbSrv->m_hParseApp, (char*)pBuf,nReadBufLen);
}
delete pBuf;
ClearCommError(hComPort, &dwErrorFlags, &ComStat );
int len =0;//= m_retList.GetSize();
}//endif if(dwEvtMask&EV_RXCHAR==EV_RXCHAR)
}//endif if( GetLastError()== ERROR_IO_PENDING)
}//endif if( !WaitCommEvent( hComPort, &dwEvtMask,&o))
else
{
if(GetLastError() == ERROR_IO_PENDING) {
GetOverlappedResult(hComPort, &osRead, &dwTransfer, TRUE ); // sleep thread
}
}
Sleep(1);
} //endwhile while(m_bConnected)
return 0;
}
int CUsbSrvApp::ComConnect(CString strPort)
{
int nBaudRate = 115200;
int nDataBits = 8;
int nStopBits = 1;
int nParity = 0;
int nFlowCtrl = 1;
if (NULL != m_hCom || m_bConnected)
{
return 0;
}
m_hCom = OpenComPort(strPort,nBaudRate,nDataBits,nStopBits,nParity,nFlowCtrl);
if( INVALID_HANDLE_VALUE == m_hCom)
{
m_hCom = NULL;
return 0;
}
memset( &m_OverlappedRead, 0, sizeof( OVERLAPPED ) );
memset( &m_OverlappedWrite, 0, sizeof( OVERLAPPED ) );
m_OverlappedRead.hEvent = CreateEvent( NULL, TRUE, FALSE, NULL );
m_OverlappedWrite.hEvent = CreateEvent( NULL, TRUE, FALSE, NULL );
m_pThread = AfxBeginThread( ReceiveComData,(void*)this,THREAD_PRIORITY_NORMAL,0,CREATE_SUSPENDED ,NULL );
if( NULL == m_pThread )
{
CloseHandle( m_hCom );
m_hCom = NULL;
return FALSE;
}
else
{
m_bConnected = TRUE;
m_pThread->ResumeThread( );
}
return TRUE;
}
int CUsbSrvApp::OnSendData(const char *szBuf, int nLen)
{
BOOL bWriteStat;
BOOL bWrite = TRUE;
DWORD dwBytesWrite = 0;
DWORD dwBytesWritten = 0;
int dwByteswrittenTotal = 0;
if (NULL == m_hCom)
return 0;
int nSentTimes=0;
while(dwByteswrittenTotal<nLen&&nSentTimes<10)
{
nSentTimes++;
dwBytesWrite = nLen-dwByteswrittenTotal;
bWriteStat = WriteFile( m_hCom, szBuf+dwByteswrittenTotal, dwBytesWrite, &dwBytesWritten, &m_OverlappedWrite );
if( !bWriteStat)
{
if ( GetLastError() == ERROR_IO_PENDING )
{
dwBytesWritten = 0;
bWrite = FALSE;
}
}
if (!bWrite)
{
bWrite = TRUE;
bWriteStat = GetOverlappedResult(m_hCom, // Handle to COMM port
&m_OverlappedWrite, // Overlapped structure
&dwBytesWritten, // Stores number of bytes sent
TRUE); // Wait flag
//deal with the error code
}
dwByteswrittenTotal += dwBytesWritten;
}
if(dwByteswrittenTotal<nLen)
return 0;
else
return 1;
}
已赞过
已踩过<
评论
收起
你对这个回答的评价是？
展开全部
打开VC++6.0，新建基于对话框的工程RS485Comm，在主对话框窗口IDD_RS485COMM_DIALOG上添加两个按钮，ID分别为IDC_SEND和IDC_RECEIVE，标题分别为“发送”和“接收”；添加一个静态文本框IDC_DISP，用于显示串口接收到的内容。 在RS485CommDlg.cpp文件中添加全局变量： HANDLE hCom; //全局变量，串口句柄 在RS485CommDlg.cpp文件中的OnInitDialog()函数添加如下代码： // TODO: Add extra initialization here hCom=CreateFile("COM1",//COM1口 GENERIC_READ|GENERIC_WRITE, //允许读和写 0, //独占方式 NULL, OPEN_EXISTING, //打开而不是创建 0, //同步方式 NULL); if(hCom==(HANDLE)-1) { AfxMessageBox("打开COM失败!"); return FALSE; } SetupComm(hCom,100,100); //输入缓冲区和输出缓冲区的大小都是1024 COMMTIMEOUTS TimeOuts; //设定读超时 TimeOuts.ReadIntervalTimeout=MAXDWORD; TimeOuts.ReadTotalTimeoutMultiplier=0; TimeOuts.ReadTotalTimeoutConstant=0; //在读一次输入缓冲区的内容后读操作就立即返回， //而不管是否读入了要求的字符。 //设定写超时 TimeOuts.WriteTotalTimeoutMultiplier=100; TimeOuts.WriteTotalTimeoutConstant=500; SetCommTimeouts(hCom,&TimeOuts); //设置超时 DCB dcb; GetCommState(hCom,&dcb); dcb.BaudRate=9600; //波特率为9600 dcb.ByteSize=8; //每个字节有8位 dcb.Parity=NOPARITY; //无奇偶校验位 dcb.StopBits=TWOSTOPBITS; //两个停止位 SetCommState(hCom,&dcb); PurgeComm(hCom,PURGE_TXCLEAR|PURGE_RXCLEAR); 分别双击IDC_SEND按钮和IDC_RECEIVE按钮，添加两个按钮的响应函数： void CRS485CommDlg::OnSend() { // TODO: Add your control notification handler code here // 在此需要简单介绍百特公司XMA5000的通讯协议： //该仪表RS485通讯采用主机广播方式通讯。 //串行半双工，帧11位，1个起始位(0)，8个数据位，2个停止位(1) //如：读仪表显示的瞬时值，主机发送：DC1 AAA BB ETX //其中：DC1是标准ASCII码的一个控制符号，码值为11H(十进制的17) //在XMA5000的通讯协议中，DC1表示读瞬时值 //AAA是从机地址码，也就是XMA5000显示仪表的通讯地址 //BB为通道号，读瞬时值时该值为01 //ETX也是标准ASCII码的一个控制符号，码值为03H //在XMA5000的通讯协议中，ETX表示主机结束符 char lpOutBuffer[7]; memset(lpOutBuffer,''\0'',7); //前7个字节先清零 lpOutBuffer[0]=''\x11''; //发送缓冲区的第1个字节为DC1 lpOutBuffer[1]=''0''; //第2个字节为字符0(30H) lpOutBuffer[2]=''0''; //第3个字节为字符0(30H) lpOutBuffer[3]=''1''; // 第4个字节为字符1(31H) lpOutBuffer[4]=''0''; //第5个字节为字符0(30H) lpOutBuffer[5]=''1''; //第6个字节为字符1(31H) lpOutBuffer[6]=''\x03''; //第7个字节为字符ETX //从该段代码可以看出，仪表的通讯地址为001 DWORD dwBytesWrite=7; COMSTAT ComStat; DWORD dwErrorFlags; BOOL bWriteStat; ClearCommError(hCom,&dwErrorFlags,&ComStat); bWriteStat=WriteFile(hCom,lpOutBuffer,dwBytesWrite,& dwBytesWrite,NULL); if(!bWriteStat) { AfxMessageBox("写串口失败!"); } } void CRS485CommDlg::OnReceive() { // TODO: Add your control notification handler code here char str[100]; memset(str,''\0'',100); DWORD wCount=100;//读取的字节数 BOOL bReadStat; bReadStat=ReadFile(hCom,str,wCount,&wCount,NULL); if(!bReadStat) AfxMessageBox("读串口失败!"); PurgeComm(hCom, PURGE_TXABORT| PURGE_RXABORT|PURGE_TXCLEAR|PURGE_RXCLEAR); m_disp=str; UpdateData(FALSE); } 您可以观察返回的字符串，其中有和仪表显示值相同的部分，您可以进行相应的字符串操作取出仪表的显示值。 打开ClassWizard,为静态文本框IDC_DISP添加CString类型变量m_disp，同时添加WM_CLOSE的相应函数： void CRS485CommDlg::OnClose() { // TODO: Add your message handler code here and/or call default CloseHandle(hCom); //程序退出时关闭串口 CDialog::OnClose(); } 程序的相应部分已经在代码内部作了详细介绍。连接好硬件部分，编译运行程序，细心体会串口同步操作部分。
已赞过
已踩过<
评论
收起
你对这个回答的评价是？
更多回答（1）
推荐律师服务：
若未解决您的问题，请您详细描述您的问题，通过百度律临进行免费专业咨询
