Question

求一篇自动化专业的英语文章

内容大概要一万个字符这样子

不要自动化专业英语书上的文章

至于翻译```能够有的话尽量有```

有出处尽量标明出处

最后`````发到我邮箱：

81912574@qq.com

收到即给分````
呃```我是要一万个字符以上的````

Answer 1

In this winding system, we use Mitsubishi A series PLC as master station
PLC because it has the characteristic of quick response and great ability of
information processing. It is used to control the behaviors of the total
winding system together with FX series PLCs of winding and unwinding
system. The operating actions of the system and the sequence of these
actions were edited beforehand into the control program by the designer. The
control program sets a series of operations of the winding system, which tells
the PLCs how to control a system. The current states of all sensors or
actuators are saved as an array of input, output or flag signals in the PLC
memory. Therefore, the PLC program is the basis of monitoring in a PLC
controlled manufacturing system.
The programming method used is the ladder diagram method. The PLC
system provides a design environment in the form of software tools running
on a host computer terminal which allows ladder diagrams to be developed,
verified, tested, and diagnosed. First, the high-level program is written in
diagrams. Then, the ladder diagram is converted into binary instruction
codes so that they can be stored in random-access memory (RAM) or
erasable programmable read-only memory (EPROM). Each successive
instruction is decoded and executed by the CPU. Thefimctionof the CPU is to control the operation of memory and I/O devices and to process data
according to the program. Each input and output connection point on a PLC
has an address used to identify the I/O bit. The method for the direct
representation of data associated with the inputs, outputs, and memory is
based on the fact that the PLC memory is organized into three regions: input
image memory, output image memory, and internal memory。

如果没有别人有发 就把分数给我吧 这年头赚点分不容易呐 -0-
祝学习顺利

Answer 2

里面要涉及的关键词有
"同步电机"
"励磁系统"
最好带点"lqg控制"的自动化英语文章我不会，i'm
sorry

Answer 3

广兄，做人不能这样子！！太不厚道了~~