Question

linux 下C语言的syn扫描代码

求 linux 下C语言的syn扫描代码 部分代码也可以
本人做毕业设计卡住了 急求 ！！！！ 采用即加分
不要win下的 也不要其他的扫描方式的

如果谁有 发synsaomiao@163.com 谢了

Answer 1

//---------------------------------------------------------------------------
//Filename:ss.c
//Author:yunshu
//Write:2004-04-02
//Thanks Wineggdrop
//Modify:2004-09-08
//---------------------------------------------------------------------------

#include <winsock2.h>
#include <ws2tcpip.h>
#include <mstcpip.h>
#include <stdio.h>

#pragma comment(lib,"ws2_32.lib")

////////////////////////////////////////////////////////////////
//全局变量
////////////////////////////////////////////////////////////////

#define srcPort 88

char srcIP[20] = ;//定义源地址
char tgtIP[20] = ;//定义目的地址
int portNow;//定义正在扫描的端口

//标准端口列表
int ports[20] = ;

typedef struct ip_hdr
{
unsigned char h_verlen; //4位首部长度,4位IP版本号
unsigned char tos; //8位服务类型TOS
unsigned short total_len; //16位总长度（字节）
unsigned short ident; //16位标识
unsigned short frag_and_flags; //3位标志位
unsigned char ttl; //8位生存时间 TTL
unsigned char proto; //8位协议 (TCP, UDP 或其他)
unsigned short checksum; //16位IP首部校验和
unsigned int sourceIP; //32位源IP地址
unsigned int destIP; //32位目的IP地址
}IP_HEADER;

typedef struct tcp_hdr //定义TCP首部
{
USHORT th_sport; //16位源端口
USHORT th_dport; //16位目的端口
unsigned int th_seq; //32位序列号
unsigned int th_ack; //32位确认号
unsigned char th_lenres; //4位首部长度/6位保留字
unsigned char th_flag; //6位标志位
USHORT th_win; //16位窗口大小
USHORT th_sum; //16位校验和
USHORT th_urp; //16位紧急数据偏移量
}TCP_HEADER;

typedef struct tsd_hdr //定义TCP伪首部
{
unsigned long saddr; //源地址
unsigned long daddr; //目的地址
char mbz;
char ptcl; //协议类型
unsigned short tcpl; //TCP长度
}PSD_HEADER;

////////////////////////////////////////////////////////////////
//函数原形
////////////////////////////////////////////////////////////////

int send_packet();//发送数据函数
int recv_packet();//监听数据函数
USHORT checksum( USHORT *, int );//计算检验和函数
void usage( char * );//显示帮助函数
void check_port( char * );//判断端口是否开放函数

////////////////////////////////////////////////////////////////
//main函数
////////////////////////////////////////////////////////////////

int main( int argc , char *argv[] )
{
WSADATA WSAData;
DWORD thread_ID = 1;
char FAR hostname[128] = ;
HANDLE ThreadHandle[20];
struct hostent *phe;

if( argc != 2 )//检查命令行参数是否正确
{
usage( argv[0] );
exit( 0 );
}

if ( WSAStartup(MAKEWORD(2,2) , &WSAData) )
{
printf("WSAStartup Error...\n");
exit(0);
}

strcpy(tgtIP,argv[1]);//得到目标主机的ip地址

gethostname(hostname,128);//获取本机主机名

phe = gethostbyname(hostname);//获取本机ip地址结构

if(phe == NULL)
{
printf("Get LocalIP Error...\n");
}

strcpy(srcIP, inet_ntoa(*((struct in_addr *)phe->h_addr_list[0])));//得到本机ip地址

//调试用，注释掉
//printf("test\t%s\n",tgtIP);
//printf("test\t%s\n",srcIP);

//开启新线程，接受数据包，分析返回的信息
HANDLE RecvHandle = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE)recv_packet,NULL,0,&thread_ID);

Sleep(500);//休息一下再启动发送数据包函数

for(int tmp = 0; tmp < 20; tmp++)
{
++thread_ID;

//要扫描的端口
portNow = ports[tmp];

//开启新线程，发送数据包
ThreadHandle[tmp] = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE)send_packet,NULL,0,&thread_ID);

//防止生成线程过快，休息
Sleep(100);
}

DWORD WaitThread = WaitForMultipleObjects( 20 , ThreadHandle , TRUE , INFINITE );
if( WaitThread != WAIT_FAILED)
{
for( int n = 0 ; n < 20 ; n++ )
{
CloseHandle( ThreadHandle[n] );
}
}
CloseHandle( RecvHandle );

WSACleanup();
return 0;
}

//计算检验和函数，完全抄别人的
USHORT checksum(USHORT *buffer, int size)
{
unsigned long cksum=0;

while(size >1)
{
cksum += *buffer++;
size -= sizeof(USHORT);
}
if(size)
{
cksum += *(UCHAR*)buffer;
}
cksum = (cksum >> 16) + (cksum & 0xffff);
cksum += (cksum >> 16);
return (USHORT)(~cksum);
}

void usage(char *prog)
{
printf("===========================================\n");
printf("Used To Scan Remote Host's Ports\n");
printf("Usage:%s TargetIP\n",prog);
printf("===========================================\n");
exit(0);
}

//发送数据包的函数
int send_packet()
{
SOCKET sendSocket;
BOOL flag;
int timeout;
SOCKADDR_IN sin;
IP_HEADER ipHeader;
TCP_HEADER tcpHeader;
PSD_HEADER psdHeader;
char szSendBuf[60] = ;
int ret;
unsigned long source_ip;
unsigned long target_ip;

//建立原生数据socket
if((sendSocket = WSASocket(AF_INET, SOCK_RAW, IPPROTO_RAW, NULL, 0, WSA_FLAG_OVERLAPPED)) == INVALID_SOCKET)
{
printf("Socket Setup Error...\n");
return 0;
}

//设置自己填充数据包
if(setsockopt(sendSocket, IPPROTO_IP, IP_HDRINCL, (char *)&flag, sizeof(flag)) == SOCKET_ERROR)
{
printf("Setsockopt IP_HDRINCL Error...\n");
return 0;
}

//设置超时时间
timeout = 1000;
if(setsockopt(sendSocket, SOL_SOCKET, SO_SNDTIMEO, (char *)&timeout, sizeof(timeout)) == SOCKET_ERROR)
{
printf("Setsockopt SO_SNDTIMEO Error...\n");
return 0;
}

target_ip = inet_addr(tgtIP);
source_ip = inet_addr(srcIP);

sin.sin_family = AF_INET;
sin.sin_port = htons(portNow);
sin.sin_addr.S_un.S_addr = target_ip;

//填充IP首部
ipHeader.h_verlen = (4<<4 | sizeof(ipHeader)/sizeof(unsigned long));
ipHeader.total_len = htons(sizeof(ipHeader)+sizeof(tcpHeader));
ipHeader.ident = 1;
ipHeader.frag_and_flags = 0x40;
ipHeader.ttl = 128;
ipHeader.proto = IPPROTO_TCP;
ipHeader.checksum = 0;
ipHeader.sourceIP = source_ip;//源IP
ipHeader.destIP = target_ip;//目的IP

//填充TCP首部
tcpHeader.th_dport = htons(portNow);//目的端口
tcpHeader.th_sport = htons(srcPort); //源端口
tcpHeader.th_seq = 0x12345678;
tcpHeader.th_ack = 0;
tcpHeader.th_lenres = (sizeof(tcpHeader)/4<<4|0);
tcpHeader.th_flag = 2;//syn标志位。0,2,4,8,16,32->FIN,SYN,RST,PSH,ACK,URG（推测,哈哈）
tcpHeader.th_win = htons(512);
tcpHeader.th_urp = 0;
tcpHeader.th_sum = 0;

//填充tcp伪首部
psdHeader.saddr = ipHeader.sourceIP;
psdHeader.daddr = ipHeader.destIP;
psdHeader.mbz = 0;
psdHeader.ptcl = IPPROTO_TCP;
psdHeader.tcpl = htons(sizeof(tcpHeader));

//计算TCP校验和
memcpy(szSendBuf, &psdHeader, sizeof(psdHeader));
memcpy(szSendBuf + sizeof(psdHeader), &tcpHeader, sizeof(tcpHeader));

tcpHeader.th_sum = checksum((USHORT *)szSendBuf, sizeof(psdHeader) + sizeof(tcpHeader));

//计算IP检验和
memcpy(szSendBuf, &ipHeader, sizeof(ipHeader));
memcpy(szSendBuf + sizeof(ipHeader), &tcpHeader, sizeof(tcpHeader));
memset(szSendBuf + sizeof(ipHeader) + sizeof(tcpHeader), 0, 4);
ipHeader.checksum = checksum((USHORT *)szSendBuf, sizeof(ipHeader) + sizeof(tcpHeader));

memcpy(szSendBuf, &ipHeader, sizeof(ipHeader));
memcpy(szSendBuf + sizeof(ipHeader), &tcpHeader, sizeof(tcpHeader));

//发送数据包
ret = sendto(sendSocket, szSendBuf, sizeof(ipHeader) + sizeof(tcpHeader), 0, (struct sockaddr*)&sin, sizeof(sin));

if(ret == SOCKET_ERROR)
{
printf("Send Packet Error...\n");
return 0;
}
else return 1;
}

int recv_packet()
{
SOCKADDR_IN sniff;
SOCKET sock;
char recvBuffer[65000] = ;//缓冲区存放捕获的数据

//建立socket监听数据包
sock = socket(AF_INET,SOCK_RAW,IPPROTO_IP);

sniff.sin_family = AF_INET;
sniff.sin_port = htons(0);
sniff.sin_addr.s_addr = inet_addr(srcIP);

//绑定到本地随机端口
bind(sock,(PSOCKADDR)&sniff,sizeof(sniff));

//设置SOCK_RAW为SIO_RCVALL，以便接收所有的IP包
//copy来的
DWORD dwBufferLen[10] ;
DWORD dwBufferInLen = 1 ;
DWORD dwBytesReturned = 0 ;
WSAIoctl(sock,SIO_RCVALL,&dwBufferInLen,sizeof(dwBufferInLen),&dwBufferLen,sizeof(dwBufferLen),&dwBytesReturned,NULL,NULL);

while(TRUE)
{
memset(recvBuffer , 0 , sizeof(recvBuffer) );

//开始捕获数据包
int bytesRecived = recv(sock,recvBuffer,sizeof(recvBuffer),0);
if(bytesRecived <= 0)
{
break;
}
check_port(recvBuffer);
}
return 1;
}

void check_port(char *buffer)
{
IP_HEADER *ipHeader;//IP_HEADER型指针
TCP_HEADER *tcpHeader;//TCP_HEADER型指针

ipHeader = (IP_HEADER *)buffer;
tcpHeader = (TCP_HEADER *) (buffer+sizeof(IP_HEADER));

if(ipHeader->sourceIP != inet_addr(tgtIP))
{
return;
}

for(int tmp=0;tmp<20;tmp++)
{
//SYN+ACK -> 2+16=18（也是推测，哈哈）
if(tcpHeader->th_flag == 18 && tcpHeader->th_sport == htons(ports[tmp]))
{
printf("[Found]\t%s\tport\t%d\tOpen\n",tgtIP,ports[tmp]);
}
}
}

Answer 2

答案已给你发送邮箱！