Question

谁能用英语帮我翻译一下下面一段话？（不要用翻译软件翻译）

首先本文通过对火焰切割技术及数控火焰切割机的国内外现状的分析，对火焰切割机的总体结构进行了设计，整体采用龙门式机构，工件进给和切割运动选用电动机带动液压泵的液压控制系统对其进行运动和切割过程。由于是火焰切割工件，所以无切削力。在液压动力滑台和切割机运动这两部分的先后顺序控制中，我采用了一套欧姆龙的PLC控制系统，并对其分别进行了PLC梯行图设计。在设计过程中采用了模块化的设计方法，以便能够方便实现调用。最后，为了更容易表达我的思想，我还绘制了火焰切割机的装配示意图。
关键词:火焰切割机 PLC 液压 控制系统

Answer 1

First of all, Based on the flame cutting technology and CNC flame cutting machine at home and abroad on the analysis, on the overall structure of the flame cutting machine has been designed, the overall use of gantry-type institutions, workpiece and cutting sports use motor driven hydraulic pump control system of its exercise and cutting process. As the flame cutting work piece, so no cutting force. In the hydraulic power stations and cutting machine sliding movement control of the two parts of the order, I use a Omron PLC control system and PLC ladder were carried out its line graph design. Used in the design process of modular design to enable easy implementation calls. Finally, in order to more easily express my thoughts, I also draw a diagram of the flame cutting machine assembly.
Key words: flame cutting machine hydraulic control system PLC

Answer 2

First this article through to the torch cutoff technology and the numerical control flame cutter's domestic and foreign present situation's analysis, carried on the design to the flame cutter's gross structure, the whole has used the Dragon Gate type organization, the work piece to feed and the cutting movement selects the electric motor to lead hydraulic pump's hydraulic control system to carry on the movement and the cutting process to it. Because is the torch cutoff work piece, therefore does not have the cutting force. In the hydraulic pressure power sliding table and in the cutter movement these two part of sequential control successively, I have used one set of ohm dragon PLC control system, and has carried on the PLC ladder good chart design separately to it. Has used the modular design method in the design process, in order to facilitate realizes the transfer. Finally, for easier to express my thought that I have also drawn up the flame cutter's assembly schematic drawing. key word: Flame cutter, PLC hydraulic pressure, control system