Question

单片机reg51.h运行时报错，请问该如何改正

用电路仿真软件Multisim12仿真单片机，运行时提示头文件reg51.h有错，错误见下图

我的reg 51.h文件是从网上下载的
/*--------------------------------------------------------------------------REG51.HHeader file for generic 80C51 and 80C31 microcontroller.Copyright (c) 1988-2002 Keil Elektronik GmbH and Keil Software, Inc.All rights reserved. --------------------------------------------------------------------------*/#ifndef __REG51_H__#define __REG51_H__/* BYTE Register */sfr P0 = 0x80;sfr P1 = 0x90;sfr P2 = 0xA0;sfr P3 = 0xB0;sfr PSW = 0xD0;sfr ACC = 0xE0;sfr B = 0xF0;sfr SP = 0x81;sfr DPL = 0x82;sfr DPH = 0x83;sfr PCON = 0x87;sfr TCON = 0x88;sfr TMOD = 0x89;sfr TL0 = 0x8A;sfr TL1 = 0x8B;sfr TH0 = 0x8C;sfr TH1 = 0x8D;sfr IE = 0xA8;sfr IP = 0xB8;sfr SCON = 0x98;sfr SBUF = 0x99;/* BIT Register */ /* PSW */sbit CY = 0xD7;sbit AC = 0xD6;sbit F0 = 0xD5;sbit RS1 = 0xD4;sbit RS0 = 0xD3;sbit OV = 0xD2;sbit P = 0xD0;/* TCON */sbit TF1 = 0x8F;sbit TR1 = 0x8E;sbit TF0 = 0x8D;sbit TR0 = 0x8C;sbit IE1 = 0x8B;sbit IT1 = 0x8A;sbit IE0 = 0x89;sbit IT0 = 0x88;/* IE */sbit EA = 0xAF;sbit ES = 0xAC;sbit ET1 = 0xAB;sbit EX1 = 0xAA;sbit ET0 = 0xA9;sbit EX0 = 0xA8;/* IP */ sbit PS = 0xBC;sbit PT1 = 0xBB;sbit PX1 = 0xBA;sbit PT0 = 0xB9;sbit PX0 = 0xB8;/* P3 */sbit RD = 0xB7;sbit WR = 0xB6;sbit T1 = 0xB5;sbit T0 = 0xB4;sbit INT1 = 0xB3;sbit INT0 = 0xB2;sbit TXD = 0xB1;sbit RXD = 0xB0;/* SCON */sbit SM0 = 0x9F;sbit SM1 = 0x9E;sbit SM2 = 0x9D;sbit REN = 0x9C;sbit TB8 = 0x9B;sbit RB8 = 0x9A;sbit TI = 0x99;sbit RI = 0x98;#endif

Answer 1

这个头文件是没有问题的，报的错是第10、11行用了“.”没有看到逗号呀。

Answer 2

是不是你在程序里头文件的引用方法不对啊！！！？

追问

#include
void main()
{
}
就写了这四行，他就报错了

追答

你用keil软件编译一下看看报错吗？

Answer 3

好像不是头文件问题啊？

追问

这个我在c文件里只写了include，其他的都没写，他就报错了。

那么应该是哪的问题

Answer 4

你发给我
看看