Question

请翻译下面这些文字，谢谢

1) Run Setup.exe and install ArtCAM 2012.
The Sentinel Driver install is required !
If you want install PostProcessor or Exchange, after installation you must
use a separate crack, each have his own. Manuals with crack located in the
folders:
for PostProcessor - "ArtCAM 2012\Install\install\PMPost\Crack"
for Exchange - "ArtCAM 2012\Install\install\PSExchange\Crack"
2) Go to the "ArtCAM 2012\Crack" folder and run "ArtCAM_Activator"
Choose:
1 – for the installation of the emulator. Activator will choose type of your
Windows and install the required version of the emulator. For all Windows
64-bit will be installed signed drivers !
2 – to remove the emulator
3 – exit
Only for Windows 8 64-bit:
If you have already installed another emulator - this emulator will be
installed immediately.
For the first installation, you need to reboot in "disable the driver signature
enforcement" mode.
The easiest way - open a command prompt as administrator and run the
command:
bcdedit /set "{current}" bootmenupolicy legacy
Restart the computer - and you will be available for open the old boot
menu by key F8 –
Select -
Disable Driver Signature Enforcement and press Enter.
In this mode, run "ArtCAM_Activator", install the emulator and restart the
computer in normal mode.
3) Copy file Wizards.exe from folder "ArtCAM_2012\Crack\Other" into folder
"C:\Program_Files\ArtCAM_2012\Exec\Wizards\Exec " and overwrite
original file.
4) For run the ArtCAM you need setup the system time until July 17, 2012 !
(January-February-March 2012). For automatically changing the system
time - copy utility ArtCAM_starter.exe from
folder ArtCAM_2012\Crack\Other into folder with ArtCAMPro.exe :
For 32 bit - C:\Program Files\ArtCAM 2012\Exec
For 64 bit - C:\Program Files\ArtCAM 2012\Exec64
Make a shortcut from this file on your desktop and run ArtCAM from this
shortcut (the system time will be set as 2012 year for the 5 seconds, and
immediately, after the ArtCAM launch, - time will be return to normal)
5) In addition, there is a distribution of the Delcam Designer. Separate crack
for him and installation instruction are inside the "Delcam Designer" folder.
In "Documentation" folder there is UserGuides in european languages and
training courses for ArtCAM and Delcam Designer.
And the most important thing!
ArtCAM 2012 will only work with ANY connected dongle from
Delcam!

Answer 1

1）运行Setup.exe安装ArtCAM 2012。
需要的哨兵驱动程序安装！
如果你想安装后处理或交换，安装后你必须
用一个单独的裂缝，每个都有自己的。带裂缝的手册
文件夹：
用于后处理“ArtCAM 2012安装\安装\ pmpost裂纹”
交流-“ArtCAM 2012安装\安装\ psexchange裂纹”
2）去“ArtCAM 2012破解”文件夹并运行“artcam_activator”
选择：
1，用于安装模拟器。激活器将选择您的类型
视窗和安装所需的模拟器版本。所有窗口
64位将安装签名驱动程序！
2，删除模拟器
3，退出
只为视窗64 8位：
如果您已经安装了另一个模拟器-这个模拟器将是
立即安装。
对于第一个安装，您需要重新启动“禁用驱动程序签名”
执法模式。
最简单的方法--打开一个命令提示，作为管理员，运行
命令：
“{ } BCDEdit /套目前“bootmenupolicy遗产
重新启动计算机-和您将可用于打开旧靴子
通过键F8–菜单
选择—
禁用驱动签名执行和按回车键。
在这种模式下，运行“artcam_activator”，安装模拟器和重启
正常模式下的计算机。
3）复制文件wizards.exe文件夹”artcam_2012 \裂纹\其他”文件夹
“C：\ \ \ \ program_files artcam_2012 exec奇才\执行”和覆盖
原始文件。
4）运行你需要设置系统时间到2012年7月17日ArtCAM！
（二月一月3月2012日）。自动换系统
时间artcam_starter.exe从复制工具
文件夹artcam_2012 \裂纹\其他进入文件夹artcampro.exe：
32位C：\程序文件\ 2012 \ Exec ArtCAM
64位C：\程序文件\ 2012 \ exec64 ArtCAM
从这个文件在您的桌面上创建快捷方式，从这跑ArtCAM
快捷方式（系统时间将设置为2012年为5秒，和
随即，ArtCAM推出后，时间会恢复正常）
5）此外，还有的Delcam设计师分布。分离裂缝
他和安装说明在“Delcam设计师”文件夹。
在“文档”文件夹有欧洲语言的用户和
对于ArtCAM和Delcam设计师培训课程。
最重要的事情！
ArtCAM 2012只会与任何连接适配器从
Delcam！