Question

麻烦你帮忙翻译为英文

Answer 1

Please see the words trlation below
1. 如果想拆下(di *** ounting)装在固定架(holder or fixture)上的LCD显示器(display)时
请按图1中显示器的按钮(button)
把显示器往按钮的相反方向(opposite direction)推即可 (如图2所示). 当装(instal)显示器安装到固定架上时
只要听到''卡(clicking sound)''的一声
即表示(indicate)装到位 (如图3所示). 2. a) 绿色线连接在一起
接干簧管(reed
please also verify your chinese description)一端 b) 黄色线连接在一起
接干簧管另一端(other end) c) 黑色线连接电池(battery)负极(negative pole) d) 红色线连接电池正极 e) 棕色线连接DQ数据端(data port) f) 橙色线连接数字地端(digital earth port. please also verify your chinese description) Trlation
1. To di *** ount the LCD display from the holder
please refer to the display button in figure1. Push the button towards its opposite direction (see figure2). For installing the display onto the holder
a clicking sound will be heard indicating the display is in correct position (see figure3). 2. a)connect the green wire to the reed b) connect the yellow wire to the other end of the reed c) connect the black wire to the negative pole of the battery d) connect the red wire to the positive pole of the battery e) connect the brown wire to the data port f) connect the orange wire to the digital ground port Hope this helps. Francis from Canada
1. If you want to remove the fixator mounted on the LCD monitor
press the button in Figure 1 display to display to the button you can push the opposite direction (as shown in Figure 2). When mounted displays to the fixation when
whenever they hear''card''is heard
it me that equipment in place (as shown in Figure 3). 2. A) the green wire connected at one end then reed b) the yellow line to connect together
then the other side of reed switch c) the black wire to connect the battery negative d) the red line to connect the battery positive e) brown line to connect the data terminal DQ f) figures to end of the orange-wire connection 可以吗??
参考: google