利用AT89C51单片机，LM016L液晶显示、时钟芯片DS1302芯片制作电子钟，需要一个程序，帮帮我吧
直接百度 1602 的时钟程序，lm016l好像就是1602。
晶振使用12m的。
#define LCM_RW P2^4 //定义引脚
#define LCM_RS P2^3
#define LCM_E P2^5
#define LCM_Data P0
#define Busy 0x80 //用于检测LCM状态字中的Busy标识
#include <reg52.h>
void WriteDataLCM (unsigned char WDLCM);
void WriteCommandLCM (unsigned char WCLCM,BuysC);
void DisplayOneChar (unsigned char X, unsigned char Y, unsigned char DData);
void DisplayListChar (unsigned char X, unsigned char Y, unsigned char code *DData);
unsigned char ReadDataLCM(void);
unsigned char ReadStatusLCM(void);
void pro_timedate(void);
bit leap_year(); //判断是否为闰年
unsigned char data year=11,month=5,date=22;//年、月、日、星期
unsigned char disbuf[16];
unsigned char data hour=23,min=59,sec=55,sec20=0; //时、分、秒、百分之一秒
unsigned char code email[] = {"YEA:MON:DAT:TIME"};
void updatetime (void);
void LCMInit (void);
void pro_display(void);
void Delay400Ms (void);
void Delay5Ms (void);
void main(void)
{
Delay400Ms(); //启动等待，等LCM讲入工作状态
LCMInit(); //LCM初始化
DisplayListChar(0, 1, email);
TMOD=0X01;
TH0=0X4C;
TL0=0X00;
TR0=1;
ET0=1;
EA=1;
while(1);
}
void pro_timedate()
{
sec++;
if(sec > 59)
{sec = 0;
min++;
if(min>59)
{min=0;
hour++;
if(hour>23)
{hour=0;
date++;
if (month==1||month==3||month==5||month==7||month==8||month==10||month==12)
if (date>31)
{date=1;month++;} //大月31 天
if (month==4||month==6||month==9||month==11)
if (date>30)
{date=1;month++;} //小月30 天
if (month==2)
{if( leap_year()) //闰年的条件
{if (date>29) {date=1;month++;}} //闰年2 月为29 天
else
{if (date>28) {date=1;month++;}} //平年2 月为28 天
}
if (month>12) {month=1;year++;}
if (year>99) year=0;
}
}
}
}
bit leap_year()
{
bit leap;
if((year%4==0&&year%100!=0)||year%400==0)//闰年的条件
leap=1;
else
leap=0;
return leap;
}
//Timer0 中断处理程序,秒的产生
void timer0() interrupt 1
{
TH0=0x4C; //Timer0 置10ms 定时初值dc00H(2^16=65536D,dc00H=56320D)
TL0=0x00; //定时时间=(65536-56320)*(1/11.0592)*12=10ms (f0=11.0592Mhz)
sec20++;
if(sec20 >= 20) //1 秒时间 (100*10ms=1000ms=1s)
{ sec20=0;
updatetime ();
pro_timedate();
pro_display ();
if(sec&0x01)
disbuf[13]=' ';
else disbuf[13]=':';
}
}
void updatetime(void)
{ disbuf[0] ='2';
disbuf[1] ='0';
disbuf[2] =year/10+48;
disbuf[3] =year%10+48;
disbuf[4] =' ';
disbuf[5] =month/10+48;
disbuf[6] =month%10+48;
disbuf[7] ='.';
disbuf[8] =date/10+48;
disbuf[9] =date%10+48;
disbuf[10] =' ';
disbuf[11]=hour/10+48;
disbuf[12]=hour%10+48;
//disbuf[13]=' ';
disbuf[14]=min/10+48;
disbuf[15]=min%10+48;
}
//显示处理程序
void pro_display()
{ unsigned char f;
for (f=0;f<=15;f++)
{DisplayOneChar( f, 0, disbuf[f]);}
}
//写数据
void WriteDataLCM(unsigned char WDLCM)
{
ReadStatusLCM(); //检测忙
//WDLCM = ((WDLCM&0x01)<<7)|((WDLCM&0x02)<<5)|((WDLCM&0x04)<<3)|((WDLCM&0x08)<<1)|((WDLCM&0x10)>>1)|((WDLCM&0x20)>>3)|((WDLCM&0x40)>>5)|((WDLCM&0x80)>>7);
LCM_Data = WDLCM;
LCM_RS = 1;
LCM_RW = 0;
LCM_E = 0;
LCM_E = 0; //延时
LCM_E = 1;
}
//写指令
void WriteCommandLCM(unsigned char WCLCM,BuysC) //BuysC为0时忽略忙检测
{
if (BuysC) ReadStatusLCM(); //根据需要检测忙
//WCLCM = ((WCLCM&0x01)<<7)|((WCLCM&0x02)<<5)|((WCLCM&0x04)<<3)|((WCLCM&0x08)<<1)|((WCLCM&0x10)>>1)|((WCLCM&0x20)>>3)|((WCLCM&0x40)>>5)|((WCLCM&0x80)>>7);
LCM_Data = WCLCM;
LCM_RS = 0;
LCM_RW = 0;
LCM_E = 0;
LCM_E = 0;
LCM_E = 1;
}
//读数据
unsigned char ReadDataLCM(void)
{
LCM_RS = 1;
LCM_RW = 1;
LCM_E = 0;
LCM_E = 0;
LCM_E = 1;
return(LCM_Data);
}
//读状态
unsigned char ReadStatusLCM(void)
{
LCM_Data = 0xFF;
LCM_RS = 0;
LCM_RW = 1;
LCM_E = 0;
LCM_E = 0;
LCM_E = 1;
while (LCM_Data & Busy); //检测忙信号
return(LCM_Data);
}
void LCMInit(void) //LCM初始化
{
LCM_Data = 0;
WriteCommandLCM(0x38,0);
//三次显示模式设置，不检测忙信号
Delay5Ms();
WriteCommandLCM(0x38,0);
Delay5Ms();
WriteCommandLCM(0x38,0);
Delay5Ms();
WriteCommandLCM(0x38,1); //显示模式设置,开始要求每次检测忙信号
WriteCommandLCM(0x08,1); //关闭显示
WriteCommandLCM(0x01,1); //显示清屏
WriteCommandLCM(0x06,1); // 显示光标移动设置
WriteCommandLCM(0x0C,1); // 显示开及光标设置
}
//按指定位置显示一个字符
void DisplayOneChar(unsigned char X, unsigned char Y, unsigned char DData)
{
Y &= 0x1;
X &= 0xF; //限制X不能大于15，Y不能大于1
if (Y) X |= 0x40; //当要显示第二行时地址码+0x40;
X |= 0x80; //算出指令码
WriteCommandLCM(X, 0); //这里不检测忙信号，发送地址码
WriteDataLCM(DData);
}
//按指定位置显示一串字符
void DisplayListChar(unsigned char X, unsigned char Y, unsigned char code *DData)
{
unsigned char ListLength;
ListLength = 0;
Y &= 0x1;
X &= 0xF; //限制X不能大于15，Y不能大于1
while (DData[ListLength]>0x20) //若到达字串尾则退出
{
if (X <= 0xF) //X坐标应小于0xF
{
DisplayOneChar(X, Y, DData[ListLength]); //显示单个字符
ListLength++;
X++;
}
}
}
//50ms延时
void Delay5Ms(void)
{
unsigned int TempCyc = 5552;
while(TempCyc--);
}
//400ms延时
void Delay400Ms(void)
{
unsigned char TempCycA = 5;
unsigned int TempCycB;
while(TempCycA--)
{
TempCycB=7269;
while(TempCycB--);
};
}
