![](https://iknow-base.cdn.bcebos.com/lxb/notice.png)
帮我翻译下!!!!(英-中)
ItemPhotoRemarks1Thetow-barlockislooseandwillnotinsertintothetow-barslot.Aguideshould...
Item Photo Remarks
1
The tow-bar lock is loose and will not insert into the tow-bar slot. A guide should be installed to guide the lock into position.
2 The end slot clamp cannot be raised as it was stuck under the L-shaped stop.
3 The downward brake mechanism uses a screw design. A cam shape design is recommended.
4 Lighten the tension on all the clamp lock springs.
5 Add reinforcement on the steering limiter.
6 Add 4 square channels to strengthen-up the side guide so they won’t bend easily.
7 Weld a block behind and in-front-of the wheel bracket so the stress will not concentrate on the holding screws.
8 It is recommended to weld the turntable onto the chassis for more strength.
先谢了!!! 展开
1
The tow-bar lock is loose and will not insert into the tow-bar slot. A guide should be installed to guide the lock into position.
2 The end slot clamp cannot be raised as it was stuck under the L-shaped stop.
3 The downward brake mechanism uses a screw design. A cam shape design is recommended.
4 Lighten the tension on all the clamp lock springs.
5 Add reinforcement on the steering limiter.
6 Add 4 square channels to strengthen-up the side guide so they won’t bend easily.
7 Weld a block behind and in-front-of the wheel bracket so the stress will not concentrate on the holding screws.
8 It is recommended to weld the turntable onto the chassis for more strength.
先谢了!!! 展开
1个回答
展开全部
项目图片说明
1.牵引杆锁是宽松的,并且不会插入入牵引杆槽孔。 应该安装指南引导锁入位置。
2. 当它是陷进在L形的中止之下,末端槽孔钳位不可能被上升。
3. 向下制动机制使用螺杆设计。凸轮形状设计建议。
4. 减轻上所有弹簧夹紧锁的紧张局势。
5. 上转向限制器添加加固。
6. 增加4种方形的渠道容易地加强旁边指南,因此他们不会弯。
7. 焊接一个块在和在前面轮子托架之后,因此重音不会集中藏品螺丝。
8. 建议对焊上更多的强度机箱转台。
1.牵引杆锁是宽松的,并且不会插入入牵引杆槽孔。 应该安装指南引导锁入位置。
2. 当它是陷进在L形的中止之下,末端槽孔钳位不可能被上升。
3. 向下制动机制使用螺杆设计。凸轮形状设计建议。
4. 减轻上所有弹簧夹紧锁的紧张局势。
5. 上转向限制器添加加固。
6. 增加4种方形的渠道容易地加强旁边指南,因此他们不会弯。
7. 焊接一个块在和在前面轮子托架之后,因此重音不会集中藏品螺丝。
8. 建议对焊上更多的强度机箱转台。
推荐律师服务:
若未解决您的问题,请您详细描述您的问题,通过百度律临进行免费专业咨询