Question

求问php configure err 错误怎么办

Answer 1

　　php-configure错误解决
　　configure: error: libjpeg.(a|so) not found
　　configure: error: libjpeg.(a|so) not found
　　ln -sf libjpeg.so.62.0.0 libjpeg.so
　　configure: error: libpng.(a|so) not found.
　　yum install libpng-devel
　　32位和64位的都装了。你可以强制删除两个包，再重装64位的包。
　　rpm --allmatches --nodeps
　　可能在config结束后会提示:
　　configure: error: libjpeg.(a|so) not found
　　configure: error: libjpng.(a|so) not found
　　错误，那么请在configure前执行如下的命令:
　　cp -frp /usr/lib64/libjpeg.* /usr/lib/
　　cp -frp /usr/lib64/libpng* /usr/lib/
　　因为php默认就在/usr/lib/下找相关库文件,而x64机器上是在:/usr/lib64
　　解决这个问题，首先确定你安装的 jpeg的x86_64的的安装位置
　　shell> updatedb
　　shell> locate libjpeg.so
　　看到已经安装位置
　　然后明白php参数的含义
　　根据php的配置参数
　　--with-jpeg-dir=/usr --with-libdir=lib64
　　--with-jpeg-dir=/usr ：是确定jpeg的安装位置
　　--with-libdir=lib64 ： 这个是一个全局参数，代表配置器寻找所有安装路径下的lib64目录，而不是默认安装路径下的lib目录
　　CentOS 5 常见的configure error的解决方法2009-10-20 10:23仅限于CentOS 5
　　configure: error: No curses/termcap library found
　　网上有的说法是：
　　--with-named-curses-libs=/usr/lib/libncursesw.so.5
　　其实是不对的，虽然能解决configure的错误，但是make的时候会提示错误，正确的做法应该是
　　yum -y install ncurses-devel
　　debian: apt-get install libncurses5-dev
　　configure: error: xml2-config not found
　　yum -y install libxml2-devel
　　debian:apt-get install libxml2-dev
　　configure: error: Cannot find OpenSSL's
　　yum -y install openssl-devel
　　configure: error: libjpeg.(a|so) not found
　　yum -y install gd
　　yum -y install gd-devel
　　debian:apt-get install libjpeg-dev
　　configure: error: libpng.(a|so) not found.
　　apt-get install libpng12-dev
　　configure: error: cannot find output from lex; giving up
　　yum -y install flex
　　configure: error: mod_deflate has been requested but can not be built due to prerequisite failures
　　yum -y install zlib-devel openssl-devel
　　debian:apt-get install zlib1g-dev
　　configure: error: libXpm.(a|so) not found.
　　apt-get install libxpm-dev
　　onfigure: error: freetype.h not found.
　　apt-get install libfreetype6-dev
　　configure: error: ...No recognized SSL/TLS toolkit detected
　　apt-get install libssl-dev
　　在x64的机器上编译PHP+GD的时候需要注意一下
　　Written by bixuan on 2007年04月12号 – 11:04
　　php编译常见错误大全Posted in linux相关 | 七月 22nd, 2009
　　1) Configure: error: xml2-config not found. Please check your libxml2 installation.
　　Solutions :
　　yum install libxml2 libxml2-devel (For Redhat & Fedora)
　　# aptitude install libxml2-dev (For ubuntu)
　　2) Checking for pkg-config… /usr/bin/pkg-config
　　configure: error: Cannot find OpenSSL’s
　　Solutions :
　　yum install openssl openssl-devel
　　3) Configure: error: Please reinstall the BZip2 distribution
　　Solutions :
　　yum install bzip2 bzip2-devel
　　4) Configure: error: Please reinstall the libcurl distribution -
　　easy.h should be in /include/curl/
　　Solutions :
　　yum install curl curl-devel (For Redhat & Fedora)
　　# install libcurl4-gnutls-dev (For Ubuntu)
　　5) Configure: error: libjpeg.(also) not found.
　　Solutions :
　　yum -y install gd
　　yum -y install gd-devel
　　yum install libjpeg libjpeg-devel
　　6) Configure: error: libpng.(also) not found.
　　Solutions :
　　yum install libpng libpng-devel
　　apt-get install libpng12-dev
　　7) Configure: error: freetype.h not found.
　　Solutions :
　　yum install freetype-devel
　　Configure: error: Unable to locate gmp.h
　　Solutions :
　　yum install gmp-devel
　　9) Configure: error: Cannot find MySQL header files under /usr.
　　Note that the MySQL client library is not bundled anymore!
　　Solutions :
　　yum install mysql-devel (For Redhat & Fedora)
　　# apt-get install libmysql++-dev (For Ubuntu)
　　10) Configure: error: Please reinstall the ncurses distribution
　　Solutions :
　　yum install ncurses ncurses-devel
　　11) Checking for unixODBC support… configure: error: ODBC header file ‘/usr/include/sqlext.h’ not found!
　　Solutions :
　　yum install unixODBC-devel
　　12) Configure: error: Cannot find pspell
　　Solutions :
　　yum install pspell-devel
　　13) configure: error: mcrypt.h not found. Please reinstall libmcrypt.
　　Solutions :
　　yum install libmcrypt libmcrypt-devel (For Redhat & Fedora)
　　# apt-get install libmcrypt-dev
　　14) Configure: error: snmp.h not found. Check your SNMP installation.
　　Solutions :
　　yum install net-snmp net-snmp-devel
　　15)开启LDAP服务还需要
　　yum -y install openldap-devel openldap-servers openldap-clients
　　16)configure: error: No curses/termcap library found
　　网上有的说法是：
　　–with-named-curses-libs=/usr/lib/libncursesw.so.5
　　其实是不对的，虽然能解决configure的错误，但是make的时候会提示错误，正确的做法应该是
　　yum -y install ncurses-devel (for redhat)
　　apt-get install libncurses5-dev(for debian)
　　17)configure: error: cannot find output from lex; giving up
　　yum -y install flex
　　18)configure: error: mod_deflate has been requested but can not be built due to prerequisite failures
　　yum -y install zlib-devel openssl-devel
　　debian:apt-get install zlib1g-dev
　　19)configure: error: libXpm.(a|so) not found.
　　apt-get install libxpm-dev
　　补充：通过以上命令配置PHP时，遇到错误，总说找不到libmcrypt。由于这服务器是个裸机，很多必须的库都没装，必须一个一个的手动安装，可libmcrypt这个库我的确装过了。重试n遍，无解，解决方案
　　Then I visited
　　http://mcrypt.hellug.gr/mcrypt/index.html
　　an learned that I have to install not only libmcrypt
　　but also mcrypt and libmhash.
　　Here is the to do:
　　libmcrytp:
　　———–
　　download libmcrypt-xxx.tar.gz
　　create the following directory: / usr / local / libmcrypt
　　copy the libmcrypt-xxx.tar.gz into that directory and move to it
　　run the following shell (>) commands: (’xxx’ is the version number)
　　> gunzip -c libmcrypt-xxx.tar.gz | tar xf -
　　> cd libmcrypt-xxx
　　> ./configure --disable-posix-threads
　　> make
　　> make check (note: ‘make check’ is optional)
　　> make install
　　then (update your environment) add in / etc / profile the following path:
　　/usr/local/libmcrypt/libmcrypt-xxxx
　　(note: as I run Red Hat 7.3 I set the line a f t e r the if-part
　　(id -u = 0 …) with: pathmunge /usr/local / libm….)
　　and add in / etc / ld.so.conf the following path: /usr/local/lib
　　then run ldconfig:
　　> ldconfig
　　now comes the important part:
　　> cd /usr/local/libmcrypt/libmcrypt-xxx/libltdl
　　> ./configure --enable-ltdl-install
　　> make
　　> make install
　　(maybe not needed: I also added a link in / usr / bin: )
　　(> cd /usr/bin)
　　(> ln -s /usr/lib/libltdl.so.3.1.0 ltdl)
　　mhash:
　　———–
　　download mhash-xxx.tar.gz
　　create the following directory: / usr / local / mhash
　　copy the mhash-xxx.tar.gz into that directory and move to it
　　run the following shell (>) commands: (’xxx’ is the version number)
　　> gunzip -c mhash-xxx.tar.gz | tar xf -
　　> cd mhash-xxx
　　> ./configure
　　> make
　　> make check (note: ‘make check’ is optional)
　　> make install
　　mcrypt:
　　———–
　　download mcrypt-xxx.tar.gz
　　create the following directory: / usr / local / mcrypt
　　copy the mcrypt-xxx.tar.gz into that directory and move to it
　　run the following shell (>) commands: (’xxx’ is the version number)
　　> gunzip -c mcrypt-xxx.tar.gz | tar xf -
　　> cd mhash-xxx
　　> ./configure
　　> make
　　> make check (note: ‘make check’ is optional)
　　> make install
　　back to PHP:
　　————–
　　move into your PHP installation directory
　　then the following command worked on my computer:
　　>
　　./configure –with-apache=/usr/local/apache/apache_1.3.29 –with-mysql –wit
　　h-mcrypt=/usr/local/mcrypt/mcrypt-2.6.4
　　> make
　　> make install