Question

DSP2812仿真器驱动问题

连接不上板子
Error connecting to the target:
Error 0x80000240/-155
Fatal Error during: Initialization, OCS,
This error was generated by TI's USCIF driver.

SC_ERR_POD_NO_LIBRARY <-155>
This utility cannot find the adapter for a custom emulator.
The adapter can be named in a board config file.

Sequence ID: 0
Error Code: -155
Error Class: 0x80000240
I/O Port = 240

Board Name: F2812 XDS510 Emulator
Cpu Name: CPU_1

Abort: Close Code Composer Studio.
Retry: Try to connect to the target again.
Cancel: Remain disconnected from the target
Diagnostic: Run diagnostic utility.

Answer 1

1看仿真器驱动是否安装成功
2看CCS驱动是否成功安装到安装目录
3配置正确
4连接即可

你的问题应该是驱动部分
看是不是和你仿真器配套，再者是不是CCS3.3的驱动。

如果你用的是实验箱，配套的可能是低级版本需要I/O端口的配置
CCS3.3一般不用。
只要按照实验说明去操作就行