Question

如何实现一台服务器为两个不同网段提供DHCP服务

Answer 1

DHCP多作用域设置
DHCP服务器使用单一的作用域，大部分时间能够满足网络的需求，但是有些特殊情况下，按照网络规划我们需要配置多作用域。
网络中如果计算机和其他设备数量增加，IP地址需要进行扩容才能满足需求。小型网络可以对所有设备重新分配IP地址，其网络内部客户机和服务器数量较少，实现起来比较简单。但如果是一个大型网络，重新配置整个网络的IP地址是不明智的，如果操作不当，可能会造成通信暂时中断以及其他网络故障。我们可以通过多作用域的设置，即DHCP服务器发布多个作用域实现IP地址增容的目的。
公司IP地址规划为192.168.2.0/24网段，可以容纳254台设备，使用DHCP服务器建立一个192.168.2.0网段的作用域，动态管理网络IP地址，但网络规模扩大到500台机器，显然一个C类网的地址无法满足要求了。这时，可以再为DHCP服务器添加一个新作用域，管理分配192.168.3.0/24网段的IP地址，为网络增加254个新的IP地址，这样既可以保持原有IP地址的规划，又可以扩容现有的网络IP地址。
（1）简单实现DHCP多作用域
对于多作用域的配置，必须保证DHCP服务器能够侦听所有子网客户机的请求信息，下面将讲解配置多作用域的基本方法，为DHCP添加多个网卡连接每个子网，并发布多个作用域的声明。
注意：划分子网时，如果选择直接配置多作用域实现动态IP分配的任务，则必须要为DHCP服务器添加多块网卡，并配置多个IP地址，否则DHCP服务器只能分配与其现有网卡IP地址对应网段的作用域。
采用双网卡实现两个作用域

1）网卡配置IP地址
DHCP服务器有多块网卡时，需要使用ifconfig命令为每块网卡配置独立的IP地址，但要注意，IP地址配置的网段要与DHCP服务器发布的作用域对应哈~
ifconfig eth0 192.168.2.1 netmask 255.255.255.0
ifconfig eth1 192.168.3.1 netmask 255.255.255.0

2）编辑dhcpd.conf主配置文件
当DHCP服务器网络环境搭建完毕后，我们可以编辑dhcpd.conf主配置文件完成多作用域的设置。
ddns-update-style none;
ignore client-updates;
subnet 192.168.2.0 netmask 255.255.255.0 {
# --- default gateway
option routers 192.168.2.1;
option subnet-mask 255.255.255.0;
option nis-domain "domain.org";
option domain-name "domain.org";
option domain-name-servers 192.168.2.2;
option time-offset -18000; # Eastern Standard Time
# option ntp-servers 192.168.1.1;
# option netbios-name-servers 192.168.1.1;
# --- Selects point-to-point node (default is hybrid). Don't change this unless
# -- you understand Netbios very well
# option netbios-node-type 2;
range dynamic-bootp 192.168.2.50 192.168.2.250;
default-lease-time 21600;
max-lease-time 43200;
# we want the nameserver to appear at a fixed address
host ns {
next-server marvin.redhat.com;
hardware ethernet 12:34:56:78:AB:CD;
fixed-address 207.175.42.254;
}
}
subnet 192.168.3.0 netmask 255.255.255.0 {
# --- default gateway
option routers 192.168.3.1;
option subnet-mask 255.255.255.0;
option nis-domain "domain.org";
option domain-name "domain.org";
option domain-name-servers 192.168.2.2;
option time-offset -18000; # Eastern Standard Time
# option ntp-servers 192.168.1.1;
# option netbios-name-servers 192.168.1.1;
# --- Selects point-to-point node (default is hybrid). Don't change this unless
# -- you understand Netbios very well
# option netbios-node-type 2;
range dynamic-bootp 192.168.3.50 192.168.3.250;
default-lease-time 21600;
max-lease-time 43200;
max-lease-time 43200;
}

保存退出哈~
3）测试验证
重启DHCP服务后检查系统日志，检测配置是否成功，使用tail命令动态显示日志信息。
tail -F /etc/log/messages

经过设置，对于DHCP服务器将通过eth0和eth1两块网卡侦听客户机的请求，并发送相应的回应。
Jan 19 16:02:51 rhel5 dhcpd: DHCPDISCOVER from 00:19:21:bd:a3:da via eth1
Jan 19 16:02:51 rhel5 dhcpd: DHCPDISCOVER from 00:19:21:bd:a3:da via eth0
Jan 19 16:02:52 rhel5 dhcpd: DHCPOFFER . 192.168.3.250 to 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:52 rhel5 dhcpd: DHCPOFFER . 192.168.2.250 to 00:19:21:bd:a3:da (mis) via eth0
Jan 19 16:02:52 rhel5 dhcpd: DHCPREQUEST for 192.168.3.250 (192.168.3.1) from 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:52 rhel5 dhcpd: DHCPACK . 192.168.3.250 to 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:52 rhel5 dhcpd: DHCPREQUEST for 192.168.3.250 (192.168.3.1) from 00:19:21:bd:a3:da (mis) via eth0: ignored (not authoritative).
Jan 19 16:02:53 rhel5 dhcpd: DHCPDISCOVER from 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:53 rhel5 dhcpd: DHCPOFFER . 192.168.3.250 to 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:53 rhel5 dhcpd: DHCPDISCOVER from 00:19:21:bd:a3:da (mis) via eth0
Jan 19 16:02:53 rhel5 dhcpd: DHCPOFFER . 192.168.2.250 to 00:19:21:bd:a3:da (mis) via eth0
Jan 19 16:02:53 rhel5 dhcpd: DHCPREQUEST for 192.168.3.250 (192.168.3.1) from 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:53 rhel5 dhcpd: DHCPACK . 192.168.3.250 to 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:53 rhel5 dhcpd: DHCPREQUEST for 192.168.3.250 (192.168.3.1) from 00:19:21:bd:a3:da (mis) via eth0: ignored (not authoritative).
Jan 19 16:02:54 rhel5 dhcpd: DHCPDISCOVER from 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:54 rhel5 dhcpd: DHCPOFFER . 192.168.3.250 to 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:54 rhel5 dhcpd: DHCPDISCOVER from 00:19:21:bd:a3:da (mis) via eth0
Jan 19 16:02:54 rhel5 dhcpd: DHCPOFFER . 192.168.2.250 to 00:19:21:bd:a3:da (mis) via eth0
Jan 19 16:02:54 rhel5 dhcpd: DHCPREQUEST for 192.168.3.250 (192.168.3.1) from 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:54 rhel5 dhcpd: DHCPACK . 192.168.3.250 to 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:54 rhel5 dhcpd: DHCPREQUEST for 192.168.3.250 (192.168.3.1) from 00:19:21:bd:a3:da (mis) via eth0: ignored (not authoritative).
Jan 19 16:02:55 rhel5 dhcpd: DHCPDISCOVER from 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:55 rhel5 dhcpd: DHCPOFFER . 192.168.3.250 to 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:55 rhel5 dhcpd: DHCPDISCOVER from 00:19:21:bd:a3:da (mis) via eth0
Jan 19 16:02:55 rhel5 dhcpd: DHCPOFFER . 192.168.2.250 to 00:19:21:bd:a3:da (mis) via eth0
Jan 19 16:02:55 rhel5 dhcpd: DHCPREQUEST for 192.168.3.250 (192.168.3.1) from 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:55 rhel5 dhcpd: DHCPACK . 192.168.3.250 to 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:55 rhel5 dhcpd: DHCPREQUEST for 192.168.3.250 (192.168.3.1) from 00:19:21:bd:a3:da (mis) via eth0: ignored (not authoritative).

Answer 2

网卡设置多个不同网段ip教程，不同ip跨网段电脑网络互相访问方法

Answer 3

我这的环境就是这样的，在DHCP上划不同的作用域就行了，只是你要有一个三层交换机，在VLAN下边加一个DHCP地址。
反正我这边就这样实现了，没有什么别的，【并不是必须两块网卡-因为我的服务器地址是一个IP】
而现在我的找一个办法让筛选器可以分开管理不同作用域。因为筛选器只有一个，这是一个问题