Question

PROE2001如何在WIN7 64位下运行，急求！谢谢！

其实绝大多数都是已经被淘汰的，需要进行编辑处理，将上述字段修改为如下：if "%PROCESSOR%" == "INTEL_64" set MC=ia64_nt if "%PROCESSOR%" == "INTEL_486" set MC=i486_nt if "%PROCESSOR_ARCHITECTURE%" == "IA64" set MC=ia64_nt if "%PROCESSOR_ARCHITECTURE%" == "AMD64" set MC=i486_nt if "%PROCESSOR_ARCHITECTURE%" == "x86" set MC=i486_nt if not "%MC%" == "unset" goto mc_done echo ERROR Cannot detect what machine type you have. echo Please make one of the following settings: echo. echo set PROCESSOR=INTEL_486 - For Windows NT Intel based machines. echo. echo set PROCESSOR=INTEL_64 - For Windows Intel Itanium based machines. echo. echo set PROCESSOR_ARCHITECTURE=AMD64 - For Windows AMD 64 based machines. echo.exit :mc_done 就可以满足现在的电脑了。修改完保存退出，再双击，使用了很多年的，拥有自己一整套开发快捷键，特殊按钮的，老的掉牙确相当亲切的PROE2001又回来了，赶紧加载自己的启动目录吧。屏幕闪烁的话进入proe界面/选项/查找graphics/把值改为win32_gdi/然后确定/最后从启proe

按照大神说的办法试了，PROE2001安装然后编辑PROE2001.bat文件，编辑过后双击打开PROE2001还是打不开，出现如图窗口：

如何解决？非常感谢！

Answer 1

替换成这段就好了，我刚装好

if "%PROCESSOR%" == "INTEL_64" set MC=ia64_nt 

if "%PROCESSOR%" == "INTEL_486" set MC=i486_nt 

if "%PROCESSOR_ARCHITECTURE%" == "IA64" set MC=ia64_nt 

if "%PROCESSOR_ARCHITECTURE%" == "AMD64" set MC=i486_nt 

if "%PROCESSOR_ARCHITECTURE%" == "x86" set MC=i486_nt 

if not "%MC%" == "unset" goto mc_done 

echo ERROR Cannot detect what machine type you have. 

echo Please make one of the following settings: 

echo. 

echo set PROCESSOR=INTEL_486 - For Windows NT Intel based machines. 

echo. 

echo set PROCESSOR=INTEL_64 - For Windows Intel Itanium based machines. 

echo. 

echo set PROCESSOR_ARCHITECTURE=AMD64 - For Windows AMD 64 based machines. 

echo.

exit 

:mc_done 

Answer 2

按网上的改了还是用不了。是怎么回事，请指教。

Answer 3

我也是这个一模一样的问题，请问怎么解决呀？

Answer 4

我也是这个问题呀 你怎么解决的

Answer 5

怎么还用这么老的版本，为何不适用XP呢？

追问

谢谢啊，XP整个公司都没人用了