
请英文高手帮我翻译下这段英文的意思,非常感激,不要电脑翻译的, 要人工的。要不我看不懂
Thepocketshallbeprovidedforstoringtheinstructiondocuments.Itwillbefastenedinthecontro...
The pocket shall be provided for storing the instruction
documents. It will be fastened in the control enclosure
for non-hazardous area rectifiers, and shall be fastened
to the underside of the oil tank lid for hazardous area
rectifiers. The pocket shall be accessible and shall not
inhibit cooling, monitoring, or maintenance of the
rectifier. The pocket shall be constructed to secure the
instruction documents during shipment and in high wind
conditions even with the enclosure door open. A clear
Lexan plate (minimum 3 mm thick) for displaying the
rectifier wiring schematic shall be fastened or framed to
the inside of the enclosure door by removable hardware.
For rectifiers in classified areas, the rectifier wiring
schematic shall be attached to the inside of the rectifier
top lid.
英文高手快来帮忙啊,电脑翻译的就免了,着急用呢。谢谢了 展开
documents. It will be fastened in the control enclosure
for non-hazardous area rectifiers, and shall be fastened
to the underside of the oil tank lid for hazardous area
rectifiers. The pocket shall be accessible and shall not
inhibit cooling, monitoring, or maintenance of the
rectifier. The pocket shall be constructed to secure the
instruction documents during shipment and in high wind
conditions even with the enclosure door open. A clear
Lexan plate (minimum 3 mm thick) for displaying the
rectifier wiring schematic shall be fastened or framed to
the inside of the enclosure door by removable hardware.
For rectifiers in classified areas, the rectifier wiring
schematic shall be attached to the inside of the rectifier
top lid.
英文高手快来帮忙啊,电脑翻译的就免了,着急用呢。谢谢了 展开
4个回答
展开全部
应提供的口袋用于存储指令文件。这将是固定在非危险区域整流器控制盒,并须固定在危险地区的油箱盖底部整流器。口袋应易于冷却,不得妨碍,监测,维修或整流器。口袋须建造,以确保在运输过程中,在强风下,即使有外壳的门打开指令文件。明确的Lexan板(最低3毫米厚),用于显示整流线路图,应以固定或框架外壳的门可移动硬件内部。对于在分类领域整流器,整流线路图应附整流器的顶盖内。
本回答被提问者采纳
已赞过
已踩过<
评论
收起
你对这个回答的评价是?
展开全部
应提供口袋里储存指导
文件。它将被系在控制的围栏里
为无害地区应整流器和关牢
下方的油箱里的油盖危险区域
二极管。应该能够接触到口袋里,不得
抑制冷却、监控、或维护
整流器。应该采用口袋里,以保证
运输过程中作业指导书,刮着大风
条件甚至是外壳门就开了。一个清晰的
Lexan板(至少3毫米厚),展示了
整流线路原理将被系或装裱
外壳门里由可移动的硬件。
在分类为整流器的地方,整流器电线
原理应安装在里面的组成的
顶部的盖子。
文件。它将被系在控制的围栏里
为无害地区应整流器和关牢
下方的油箱里的油盖危险区域
二极管。应该能够接触到口袋里,不得
抑制冷却、监控、或维护
整流器。应该采用口袋里,以保证
运输过程中作业指导书,刮着大风
条件甚至是外壳门就开了。一个清晰的
Lexan板(至少3毫米厚),展示了
整流线路原理将被系或装裱
外壳门里由可移动的硬件。
在分类为整流器的地方,整流器电线
原理应安装在里面的组成的
顶部的盖子。
已赞过
已踩过<
评论
收起
你对这个回答的评价是?
展开全部
应提供的口袋用于存储指令文件。这将是固定在机箱的控制非危险区域整流器,并应紧固到油箱盖在危险区域的底部整流器。应获得的口袋,并不得抑制冷却,监控,或维修整流器。不得建造的口袋来保护在运输过程中的指令文件和高风条件甚至与外壳的门打开。明确Lexan力显板材(至少3毫米厚),用于显示整流线路图,应以固定,对可移动硬件柜体门进去。对于在分类领域整流器,整流器接线示意图应附整流器的内顶盖。
已赞过
已踩过<
评论
收起
你对这个回答的评价是?
展开全部
应提供口袋里储存指导
文件。它将被系在控制的围栏里
为无害地区应整流器和关牢
下方的油箱里的油盖危险区域
二极管。应该能够接触到口袋里,不得
抑制冷却、监控、或维护
整流器。应该采用口袋里,以保证
运输过程中作业指导书,刮着大风
条件甚至是外壳门就开了。一个清晰的
Lexan板(至少3毫米厚),展示了
整流线路原理将被系或装裱
外壳门里由可移动的硬件。
在分类为整流器的地方,整流器电线
顶部的盖子。
文件。它将被系在控制的围栏里
为无害地区应整流器和关牢
下方的油箱里的油盖危险区域
二极管。应该能够接触到口袋里,不得
抑制冷却、监控、或维护
整流器。应该采用口袋里,以保证
运输过程中作业指导书,刮着大风
条件甚至是外壳门就开了。一个清晰的
Lexan板(至少3毫米厚),展示了
整流线路原理将被系或装裱
外壳门里由可移动的硬件。
在分类为整流器的地方,整流器电线
顶部的盖子。
已赞过
已踩过<
评论
收起
你对这个回答的评价是?
推荐律师服务:
若未解决您的问题,请您详细描述您的问题,通过百度律临进行免费专业咨询