Question

liunx 在开启网络服务时 service network restart 时，出现错误

hutting down interface eth0: ./network-functions: line 124: /bin/awk: cannot execute binary file
./network-functions: line 124: /bin/awk: cannot execute binary file
./network-functions: line 124: /bin/awk: cannot execute binary file
./network-functions: line 124: /bin/awk: cannot execute binary file
[ OK ]
Shutting down loopback interface: [ OK ]
/etc/sysconfig/network-scripts/init.ipv6-global: line 140: /bin/awk: cannot execute binary file
/etc/sysconfig/network-scripts/network-functions-ipv6: line 1207: /bin/awk: cannot execute binary file
/etc/sysconfig/network-scripts/init.ipv6-global: line 71: /bin/awk: cannot execute binary file
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: ./network-functions: line 124: /bin/awk: cannot execute binary file
./network-functions: line 124: /bin/awk: cannot execute binary file
./network-functions: line 124: /bin/awk: cannot execute binary file
./network-functions: line 124: /bin/awk: cannot execute binary file
[ OK ]
[root@Shelley ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:E6:9D:3B
inet addr:10.4.9.55 Bcast:10.4.9.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fee6:9d3b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:737 errors:0 dropped:0 overruns:0 frame:0
TX packets:94 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:108044 (105.5 KiB) TX bytes:16635 (16.2 KiB)
Interrupt:75 Base address:0x2000
网卡的配置如上，高手能帮忙看看有什么问题么，实在没看出有什么问题。

Answer 1

遇到过一次，当时请教的别人。
还是ifcfg-eth0 配置文件配置错误的事情，
DEVICE=eth1
ONBOOT=yes
BOOTPROTO=static
IPADDR=192.168.70.191
NETMASK=255.255.255.0
GATEWAY=192.168.70.1
配置这些试一试，成功了，别忘记好评，没成功不要怪我哦

Answer 2

网卡配置文件问题，可用setup--->network下重新配置。

Answer 3

如下面的错误时：
fgrep:
ifcfg-ifcfg-eth1DEVICE=eth0：::No such file or directory
fgrep: ifcfg-ifcfg-eth0: No such
file or directory
Shutting down interface eth0: [ OK ]
Shutting down
interface eth1: [ OK ]
/etc/init.d/network: line 236: ifcfg-ifcfg-eth0: No
such file or directory
Shutting down loopback
。。。。。。。
解决办法是在 /etc/sysconfig/network-scripts/ 目录下面有与ifcfg-eth0同名的文件，将其删除，然后 service network restart即可。

Answer 4

建议尝试下重安装awk试试。
awk有三个版本，可能 awk gawk nawk。你的系统可能有不同的版本导致找不到命令。