Question

帮我翻译下这段英文

American wire gauge
From Wikipedia, the free encyclopedia
Jump to: navigation, search
American wire gauge (AWG), also known as the "Brown and Sharpe" wire gauge, is used in the United States and other countries as a standard method of denoting wire diameter, especially for nonferrous, electrically conducting wire. The steel industry uses a different numbering system for their wire thickness gauges (for example, W&M Wire Gauge or US Steel Wire Gauge or the different Music Wire Gauge) so data below does not apply to steel wire.
Increasing gauge numbers give decreasing wire diameters, which is similar to many other non-metric gauging systems. This seemingly-counterintuitive numbering is derived from the fact that the gauge number is related to the number of drawing operations that must be used to produce a given gauge of wire; very fine wire (for example, 30 gauge) requires far more passes through the drawing dies than does 0 gauge wire.
Note that for gauges 5 through about 14, the wire gauge is effectively the number of bare solid wires that, when placed side by side, span 1 inch. That is, 8 gauge is about 1/8 inches in diameter.
In the same fashion, AWG is also commonly used to specify body piercing jewelry sizes, especially smaller sizes.[1]
Contents
[hide]
• 1 Formulae
• 2 Table of AWGs and approximate corresponding sizes
• 3 References
• 4 See also
• 5 External links

Answer 1

美国线材量从维基、百科免费妄:导航,搜索美国有线衡量(阵列波导光栅) 又称"布朗和夏普"钢丝收集、 用美国和其他国家的标准方法指丝直径 尤其对有色、电力导线. 钢铁行业不同用途的导线厚度仪表编号系统(例如 钨丝收集或并购美国钢丝收集或收集不同音乐线材)等数据低于不适用 以钢丝. 钢丝直径减小量增加号码给,这是许多其他类似的非度量测系统. 这看似-counterintuitive号码是从收集到的一些相关的一些绘画作业 必须用来生产某一计丝; 极微细线材(例如 30计)要求远比通过绘画去世0衡量是否比丝. 经过约5注,仪表14 有效的次数是衡量电线裸露电线坚实,当并列放置, 跨度1英寸. 即约18计/直径8英寸. 在同一时装、AWG的也是常用指明大小穿孔饰品、 尤其是规模较小. [1]目录[隐藏]*1*2表AWG组成公式及相应的大小近似●三述 ●四●五又见对外联系

Answer 2

这段话意思是：
那么,你既然是阅读理解,我没有翻译,我现在英文并列. .
但我不知道,如果你不听,以了解整个. .如果我必须找翻译,是指听....