Question

请教如何在ADAMS里面柔性体和刚体之间的接触问题

如图，这是一个网带输送机构，图中网带是在ANSYS中划分为有限元模型后导入ADAMS中的，其他三根轴都是刚体，但在填加接触(creat contace)时，出现一个对话框，内容如下：
WARNING: Model .ZDS is no longer compatible with Adams/Solver (FORTRAN).
.ZDS.CONTACT_1 may be causing the incompatibility because of one or more
of the following:

- Objects of type Contact are not compatible with Adams/Solver (FORTRAN).

- The topology of the model has changed so .ZDS.CONTACT_1
is no longer connected in a way that is compatible with
Adams/Solver (FORTRAN).

- An attribute of .ZDS.CONTACT_1 is no longer compatible with
Adams/Solver (FORTRAN).

If you intend to use Adams/Solver (FORTRAN), you must change
your model to eliminate the incompatibility. For more information,
see the online help for the object listed.

If you do not want to use Adams/Solver (FORTRAN), then be sure that you
set your preferences so Adams/Solver (C++) is the default as follows:

1) From the Settings menu, point to Solver and then select either
Solver Executable or Preferences, depending on the product
you are using.

2) To learn more, press F1 in the dialog box.

在接触类型里，选择的是flex body to solid。暂时没有处理这个问题，有定义了其他两根轴和网带之间的接触，定完验证建模，弹出内容如下
are only supported by the C++ Solver.

Unsupported element names:
CONTACT_1
CONTACT_2
CONTACT_3

ERROR: Error(s) found in input while populating Solver database.
ERROR: Errors while reading in ADAMS dataset。不知道是什么原因，我有两点疑问一是在定义接触的时候应该是主动物体在先，从动在后，而我这里是把网带这个柔性体从动构件定义在先了，是不是原因所在？二是我试图通过建哑物体来实现连接，结果哑物体在柔性体网带上无法创建，目前还没找出原因，不知道是不是我亚物体创建过程中有错？望高手解答下我的疑问，谢谢了

Answer 1

请问楼主柔性体与刚体接触问题解决没有，同求啊