Question

请帮忙翻译一下如下内容，十分紧急！在线等！拜谢

将床单两端的4个定位孔分别挂到卷辊两端的挂帽上，并将床单的边置于卷辊内侧，并保持相同的宽度。
将卷辊压杆压入槽内，并将卡箍向外侧旋转，压住压杆，再将床单的边翻向卷辊外侧。
向外拉出卷辊变速器拉手，使变速器处于快档位置。
将病人双手放在腹部，双腿并拢，这时，顺时针方向摇动卷辊摇把，直到卷辊向内侧转动大约一圈时，向内推回变速器拉手，在低速下继续顺时针转动摇把

Answer 1

4 holes of both ends of the sheet were linked to the volume cap on the roll at both ends of the peg, and place rolls side of the sheets inside, and keep the same width.
The tank rolls onto the bar and clamp to the lateral rotation, press and hold the bar, and then turned to the side of the sheet rolls outside.
Pull rolls transmission handle, so that transmission is fast file location.
The patient hands on the abdomen, legs close together, then, shake rolls clockwise crank until the rolls turn around to the inside of the circle, the inward push back transmission handles, turn clockwise at low speed to shake To

追问

在线吗？
请问你是用什么翻译的啊？

追答

自己

追问

Hi你了

Answer 2

Will sheet of 4 positioning hole ends hang on both ends of the coil roller respectively, and hang cap edge in sheets, and maintain winding up roller inside the same width.
Will roll roller rod, pressed into the groove and laterally fern rotation, pinned lever, again will sheets to roll over outside edge roller.
To pull coil roller transmissions outside shake handshandle, make fast gear transmission in position.
Hands on abdomen, patient legs together, then, clockwise shaken YaoBa until coil winding up roller to roll about lap medial rotation, inward back transmission in low-speed shake handshandle, continue to YaoBa clockwise

Answer 3

Will sheet of 4 positioning hole ends hang on both ends of the coil roller respectively, and hang cap edge in sheets, and maintain winding up roller inside the same width.

Will roll roller rod, pressed into the groove and laterally fern rotation, pinned lever, again will sheets to roll over outside edge roller.

To pull coil roller transmissions outside shake handshandle, make fast gear transmission in position

Answer 4

撒大苏打撒撒撒