Question

allegro生成artwork文件时报错？

allegro生成artwork文件时为什么不能生成top和bottom层，如下：
ERROR: aborting film - Shape with first seg=(-3.9996 -27.4000) [layer=TOP]
has a void with extents [(25.7162 28.0531) (26.9078 29.3728)] that touches
another shape with first seg=(-3.4000 -27.9996). Manually resolve problem.

ERROR: aborting film - artwork will not be generated!

ERROR: aborting film - Shape with first seg=(-3.9996 -27.9996) [layer=BOTTOM]
has a void with extents [(2.0190 -25.4380) (5.0190 -22.4380)] that touches
another shape with first seg=(78.9996 -27.9996). Manually resolve problem.

ERROR: aborting film - artwork will not be generated!
已经解决，最后铺铜后，将动态改为静态OK。

Answer 1

找到error中的错误坐标，打开shape的boundary，一般有微笑的小空的shape，或是shape在此位置的形状宽度不好，直接修改或删除就好

Answer 2

我刚才也遇到了，想了下，是封装的丝印(Package Geometry 的silkscreen层），在布线完后期加工时，又放了一个丝印在上面重合了，是同一层。删掉就可以了