Question

请帮忙翻译以下内容（中翻英）

熔铸和板带车间采用以上统一的标签！

标签说明：
1.卷号：
卷号是生产工艺上下游机组之间物料传递的唯一识别的编号，它必须唯一和一致，是
由三级机计划统一编号，一般都不会包括规格，牌号等。
卷号的规范为14位如70922 007 1 2 0001
第一至五位 如70922为年月日，是计划下达日期
第六至八位 如007 为炉次流水号 范围001-999
第九位 如1为坯次号 范围1-9
第十位 如2 为分卷号 范围0-9，a-z
第十一至十四位 如0001 为纵剪流水号
第一至八位共同代表炉号
第一至九位共同代表坯号

2.数量：为1；

3.条码：条码采用Code128编码，根据卷号生成。

Answer 1

Strip casting workshop and a more uniform labeling!

Labeling:
1. Vol:
Volume of the production of downstream units on the transfer of materials between the only identification number, and it must be the only consistent,
The reunification plan by the No. 3 machine are generally not included specifications, such as brands.
Volume of the norms as 14 70922 007 1 2 0001
As to the first 70,922 for five years, is the planned date of issue
6 to 8 as a furnace at 007 26th of 001-999
As for a ninth-blank range at 1-9,
If the 10th - Vol 2 minutes of the 0-9, a-z
The 11st 0001 to 14 as of slitting sequence
Common to the first eight representatives of the furnace
Common to the first nine representatives of Blank

2. Quantity: 1;

3. Barcode: barcode coding used Code128, Vol generation.