DAEMON Tools导致蓝屏
最近我发现我的电脑经常蓝屏,以为是系统问题,优化维护也没什么明显作用。后来才发现是我以前安装的DAEMONTools虚礼光驱的问题。这让我烦死了,这东东卸载不了,N种卸载...
最近我发现我的电脑经常蓝屏,以为是系统问题,优化维护也没什么明显作用。后来才发现是我以前安装的DAEMON Tools虚礼光驱的问题。这让我烦死了,这东东卸载不了,N种卸载的办法我的试过了,每次都导致我电脑直接蓝屏了,我把文件全删除了,但控制面板里的那家伙就一直在,大大的心病哦。我不想重装系统,有很重要的文件在,哪个大哥帮帮忙哦```谢谢拉````
我系统蓝屏肯定不是兼容问题~~~~!!!!系统驱动全是用的原版的```我的是笔记本电脑哦```注册表编辑器怎么打开?在第3步Windows\System32\Drivers中的驱动文件我没找到,应该是没有的,有影响不?? 展开
我系统蓝屏肯定不是兼容问题~~~~!!!!系统驱动全是用的原版的```我的是笔记本电脑哦```注册表编辑器怎么打开?在第3步Windows\System32\Drivers中的驱动文件我没找到,应该是没有的,有影响不?? 展开
2个回答
展开全部
1. Open device manager (SCSI/RAID Controllers section) and delete SCSI controller with name corresponding with name of Daemon driver
(miniport driver name). If you have problems doing it (eg. system crashes) then start from step 3 (skip steps 1 and 2).
步骤1、打开设备管理器(“SCSI和RAID控制器”部分)然后删除对应Daemon驱动名(miniport driver名)的SCSI controller设备。若出现问题导致这个步骤不能进行(例如系统崩溃)则从步骤3开始(跳过步骤1和步骤2)。
2. Open device manager (System devices section) and delete device with driver corresponding with Daemon driver (bus driver name). In current versions of Daemon Tools it is 'PnP BIOS Extension' but most likely it may change in next versions. Again, if you have some problems doing it, skip this step
步骤2、打开设备管理器(“系统设备”部分)然后删除对应Daemon驱动名(bus driver名)的设备。当前版本的Daemon Tools中这个设备名是“'PnP BIOS Extension”但下个版本里很有可能会换个名字。再说一次,如果进行这个步骤有问题的话,请跳过这一步。
3. Find Daemon driver files in Windows\System32\Drivers folder
(in Win95/98/ME also check Windows\System\IOSUBSYS folder).
Make sure your system is configured to display system files (ControlPanel->Tools->FolderOptions->View) in order you can see them. Delete Daemon driver files.
default v3.46 driver file names are d346bus.sys and d346prt.sys
default v3.47 driver file names are d347bus.sys and d347prt.sys
步骤3、在Windows\System32\Drivers文件夹中查找Daemon驱动文件(在Win95/98/ME系统中还要查找Windows\System\IOSUBSYS文件夹)。
为了能看到这些文件请确定你的系统已经配置为“显示系统文件”了(控制面板-工具-文件夹选项-查看)。删除Daemon驱动文件。
默认的3.46版本驱动文件名是d346bus.sys和d346prt.sys
默认的3.47版本驱动文件名是d347bus.sys和d347prt.sys
4. In WinNT/2000/XP/2003 open registry editor and check HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services for entries with same names as Daemon driver files. Delete these keys.
步骤4、WinNT/2000/XP/2003的系统请打开注册表编辑器然后检查HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services中跟Daemon驱动文件同名的条目。删除这些项。
5. Reboot your system. If you executed steps 1 and 2 then you don't need to do anything anymore. Otherwise proceed to next step.
步骤5、重新启动你的系统。如果执行了步骤1和2那么你不需要再做什么了。否则进行下一步。
6. Go to device manager - you may see some device with yellow mark.
This is most likely Daemon device which cannot start because it's drivers are deleted. Delete this device from Device Manager.
步骤6、打开设备管理器 - 你也许会看到某些带有黄色惊叹号的设备。
这很可能是不能启动的Daemon设备因为它们的驱动被删除了。从设备管理器里删除这些设备。
找不到是没有影响的。
(miniport driver name). If you have problems doing it (eg. system crashes) then start from step 3 (skip steps 1 and 2).
步骤1、打开设备管理器(“SCSI和RAID控制器”部分)然后删除对应Daemon驱动名(miniport driver名)的SCSI controller设备。若出现问题导致这个步骤不能进行(例如系统崩溃)则从步骤3开始(跳过步骤1和步骤2)。
2. Open device manager (System devices section) and delete device with driver corresponding with Daemon driver (bus driver name). In current versions of Daemon Tools it is 'PnP BIOS Extension' but most likely it may change in next versions. Again, if you have some problems doing it, skip this step
步骤2、打开设备管理器(“系统设备”部分)然后删除对应Daemon驱动名(bus driver名)的设备。当前版本的Daemon Tools中这个设备名是“'PnP BIOS Extension”但下个版本里很有可能会换个名字。再说一次,如果进行这个步骤有问题的话,请跳过这一步。
3. Find Daemon driver files in Windows\System32\Drivers folder
(in Win95/98/ME also check Windows\System\IOSUBSYS folder).
Make sure your system is configured to display system files (ControlPanel->Tools->FolderOptions->View) in order you can see them. Delete Daemon driver files.
default v3.46 driver file names are d346bus.sys and d346prt.sys
default v3.47 driver file names are d347bus.sys and d347prt.sys
步骤3、在Windows\System32\Drivers文件夹中查找Daemon驱动文件(在Win95/98/ME系统中还要查找Windows\System\IOSUBSYS文件夹)。
为了能看到这些文件请确定你的系统已经配置为“显示系统文件”了(控制面板-工具-文件夹选项-查看)。删除Daemon驱动文件。
默认的3.46版本驱动文件名是d346bus.sys和d346prt.sys
默认的3.47版本驱动文件名是d347bus.sys和d347prt.sys
4. In WinNT/2000/XP/2003 open registry editor and check HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services for entries with same names as Daemon driver files. Delete these keys.
步骤4、WinNT/2000/XP/2003的系统请打开注册表编辑器然后检查HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services中跟Daemon驱动文件同名的条目。删除这些项。
5. Reboot your system. If you executed steps 1 and 2 then you don't need to do anything anymore. Otherwise proceed to next step.
步骤5、重新启动你的系统。如果执行了步骤1和2那么你不需要再做什么了。否则进行下一步。
6. Go to device manager - you may see some device with yellow mark.
This is most likely Daemon device which cannot start because it's drivers are deleted. Delete this device from Device Manager.
步骤6、打开设备管理器 - 你也许会看到某些带有黄色惊叹号的设备。
这很可能是不能启动的Daemon设备因为它们的驱动被删除了。从设备管理器里删除这些设备。
找不到是没有影响的。
参考资料: http://www.yesky.com/topic/topic/137/1740517.html
推荐律师服务:
若未解决您的问题,请您详细描述您的问题,通过百度律临进行免费专业咨询