Question

毕业论文的摘要不知道怎么翻成英文，不要拿谷歌翻译糊弄人啊，要翻译的在下面：

本设计主要研究的是以PLC为控制器的图书馆照明系统。该系统使用热释温度传感器和光敏电阻管采集输入信号，再传递给PLC，通过PLC控制图书馆照明系统的开通与关断，从而达到节约电能的目的。

Answer 1

The design of the main research for the library of the controller is based on PLC lighting system. The system USES heat release temperature sensor and photoconductive resistance tube collect and input signals, then transfer to PLC, through the PLC control system and the opening of the library lighting turned off, so as to achieve the purpose of saving energy.

Answer 2

The study of thus design is mainly focus on the PLC remote controled library lighting system . This system make use of the thermo temperature senser and the light sensetive electric resistor to collect the input data and then transform the data to the PLC.Though the open and cut down of the PLC controlled library lighting system, so as to reach the goal of reducing the electric energy used.

Answer 3

The design mainly focuses on the library lighting system controled by PLC . In this system, temperature senser and light sensetive electric resistor is used to collect and input data, and then the data is transformed to PLC. PLC is designed to control the library lighting system‘s on and off ，so as to reduce electric energy