Question

请求帮助翻译成英文句子，奖励感谢，不要机翻哦$

请求帮助翻译成英文句子，奖励感谢，不要机翻哦$22# wire导体的OD约为0.65mm,但是PIN的宽度仅为0.45mm,焊接接触面积小于导体OD,易造成假焊的品质风险。同时，，PIN间隙仅为1.27mm,wire 焊接后锡点大，相邻的PIN之间也有短路的品质风险。
结合PIC标准，是否接受以上的焊接条件？

Answer 1

The OD of wire conductor is 0. 65mm, but the width of N is just 0. 45mm, the welding contact area is less than the conductor OD, which is easy to cause the quality risk of fake welding. At the same time, the gap between P and N is only 1, 27mm, the tin point is large after wire welding, and there is also the quality risk of short circuit between adjacent P and N.
In combination with P ℃ standard, whether to accept the above welding conditions? Pack up