Question

英语翻译机械方面的 急！！！

After positioning along the X– and Y– axes, rapid traverse is performed
to point R.
Drilling is performed from point R to point Z.
When point Z has been reached, cutting feed is performed to return to
point R.
Before specifying G85, use a miscellaneous function (M code) to rotate
the spindle.
When the G85 command and an M code are specified in the same block,
the M code is executed at the time of the first positioning operation. The
system then proceeds to the next drilling operation.
When K is used to specify the number of repeats, the M code is executed
for the first hole only; for the second and subsequent holes, the M code
is not executed.
When a tool length offset (G43, G44, or G49) is specified in the canned
cycle, the offset is applied at the time of positioning to point R.

Answer 1

因为不了解这是具体描述什么机床或设备的，以下译文仅作参考：
沿X轴和Y轴定位后，迅速旋转到R点。
从R点钻到Z点。
钻到Z点后，将进刀退回到R点。
在给出G85前，用辅助功能（代码M）旋转主轴。
若G85发出命令且代码M在同一块内给出时，则首次定位操作时同时执行代码M。系统将进行下一步钻孔操作。
当K用于指定重复次数时，仅在第一个孔时执行代码M；第二个及之后的孔不执行代码M。
若封闭循环中给出刀具长度校正（G43， G44或G49），定位到R点时需用到该校正。

Answer 2

必须发图纸过来，不然的话无法操作这个切割程序

Answer 3

以X轴和Y轴快速定位

Answer 4

这是什么机械啊，还是找有道和谷歌吧