Question

我是英语菜鸟，有一点摘要翻译不过来，希望哪个英语高手帮我翻译一下，不胜感激。

采用响应面分析法对溶胶-凝胶法增强植物纤维发泡材料的工艺进行优化。探讨了pH值、二氧化硅浓度、水玻璃添加量对抗压强度的影响。结果表明：各因素间均具有较强的交互作用，3个因素对抗压强度的影响的主次顺序依次为：水玻璃添加量、二氧化硅浓度、pH值；得到抗压强度最佳的制备条件为：二氧化硅浓度为0.6mol/L，水玻璃添加量为53%，pH值为7，得到抗压强度为4.1MPa；抗压强度与各因素的关系模型可表示为：Y=4.03-0.069×A+0.38×B+0.19×C-0.26×A×B+0.11×A×C+0.068×B×C-0.21×A2-0.35×B2-0.27×C2，该模型拟合程度良好。

Answer 1

The response surface analysis to solgel enhance plant fiber foaming material process optimization. Discusses the pH value, silicon dioxide concentration, the adding amount of sodium silicate against pressure effect on the strength. The results show that among various factors are strong interaction, three factors against the compressive strength of the influence of the primary and secondary order is as follows: the adding amount of sodium silicate, silicon dioxide concentration and pH value; Get the compressive strength of the best preparation conditions for: silica concentration is 0.6 mol/L, sodium silicate add content is 53%, pH value is 7, get compressive strength is 4.1 MPa; Compressive strength and the relationship between the factors model can be expressed as: Y = 4.03-0.069 by A + 0.38 by B + 0.19 by C - 0.26 by A × B + 0.11 by A × C + 0.068 by B × C - 0.21 by A2-0.35 by B2-0.27 by C2, this model fitting degree good.

Answer 2

Using response surface analysis method sol gel method to enhance plant fiber foaming material technology optimization.The effects of pH value, concentration of water glass, silica content on the compressive strength of.The results showed that: among various factors all have stronger interaction, 3 factors on the compressive strength of the primary and secondary effects of sequence: adding water glass, silica concentration, pH value of compressive strength; get the best preparation conditions are: silica concentration is 0.6mol/L, water glass addition quantity is 53%, pH value 7, get a compressive strength of 4.1MPa; compressive strength and the relationship between different factors model can be expressed as: Y=4.03-0.069 × A+0.38 × B+0.19 × C-0.26 × A × B+0.11 × A × C+0.068 × B × C-0.21 × A2-0.35 × B2-0.27 × C2, the model fitting degree of good. 翻译软件是什么东东

Answer 3

E