Question

帮我翻译

1、上料间隔时间 t1
上料间隔时间是控制器在上料过程中，一路停止后到下一
路启动的时间。单位秒。
2、卸料控制延迟时间 t2
卸料控制延迟时间是控制器在卸料过程中，当卸料达到零位
范围后再延迟的时间，时间到后停止卸料。单位秒。
3、延迟启动时间 t3
延迟启动时间是控制器在此次卸料完成后，至启动下一周期
上料的延迟时间，时间到后在上料允许的情况下进行下一周期的
上料。单位秒。
4、禁止比较时间 t4
禁止比较时间是控制器在上料过程中，物料启动上料后因为
冲击作用，造成物料重量大幅波动，此时间内不进行物料的重量
比较。单位秒。
5、零位范围 PL
零位范围是一个重量设定值。控制器在卸料过程中，卸到该
重量值范围之内时，则启动卸料控制延迟时间。

Answer 1

1, the feeding interval t1 feeding time interval is the controller in the process of feeding, after all the way to stop the start time to the next road. Unit of seconds.
2, discharging control delay time t2 unloading control delay time is the controller in the process of unloading, when unloading after reaching zero range delay time again, time to stop after unloading. Unit of seconds.
3 t3, delayed start time delay start time is the controller in the discharging completed, to start next cycle loading delay time, time to loading permission after the loading on to the next period. Unit of seconds.
4, more time is the controller more time t4 are prohibited in the process of feeding, material after start feeding because of the impact caused by the material weight fluctuations, this period of time does not compare the weight of the material. Unit of seconds.
5, zero range PL zero range is a weight set point. Controller in the unloading process, unloading to the weight value scope, then start the unloading control delay time.

追问

这也是直接用翻译工具翻译的嘛？我想要能直接用的翻译~ 谢谢

追答

一般翻译过后的文字意思都会有些缺失。亲，要求不要那么高吗~~~

Answer 2

Please help me translate it~

Answer 3

What do you need?

追问

建筑机械 说明书 汉译英