Question

急求STC89C52的数字钟温度计（液晶显示1602 DS1302 DS18B20）的程序 C语言和汇编都行啊 ！

跪求各位大仙帮忙啊 ！急用！若是能用，重金感谢啊！另补充： 有四个按键 ，蜂鸣器在温度大于或小于一定值时要可以报警的

Answer 1

程序功能：将DS18B20所采集到的温度实时显示到1602上。
*****************************************************************/
#include <reg52.H>
#include <intrins.H>
#include <math.H>

#define uchar unsigned char
#define uint unsigned int
sbit dula = P2^6;
sbit wela = P2^7;

sbit RS = P3^5;
sbit LCDEN = P3^4;

void delayUs()
{
_nop_();
}

void delayMs(uint a)
{
uint i, j;
for(i = a; i > 0; i--)
for(j = 100; j > 0; j--);
}

void writeComm(uchar comm)
{
RS = 0;
P0 = comm;
LCDEN = 1;
delayUs();
LCDEN = 0;
delayMs(1);
}

//写数据:RS=1, RW=0;
void writeData(uchar dat)
{
RS = 1;
P0 = dat;
LCDEN = 1;
delayUs();
LCDEN = 0;
delayMs(1);
}

void init()
{

dula = wela = 0;
writeComm(0x38);
writeComm(0x0c);
writeComm(0x06);
writeComm(0x01);
}

void writeString(uchar * str, uchar length)
{
uchar i;
for(i = 0; i < length; i++)
{
writeData(str[i]);
}
}

/**//*****************************DS18B20*******************************/
sbit ds = P2^2;
void dsInit()
{

unsigned int i;
ds = 0;
i = 100;
while(i>0) i--;
ds = 1;
i = 4;
while(i>0) i--;
}

void dsWait()
{
unsigned int i;
while(ds);
while(~ds);
i = 4;
while(i > 0) i--;
}

bit readBit()
{
unsigned int i;
bit b;
ds = 0;
i++;
ds = 1;
i++; i++;
b = ds;
i = 8;
while(i>0) i--;
return b;
}

unsigned char readByte()
{
unsigned int i;
unsigned char j, dat;
dat = 0;
for(i=0; i<8; i++)
{
j = readBit();

dat = (j << 7) | (dat >> 1);
}
return dat;
}

void writeByte(unsigned char dat)
{
unsigned int i;
unsigned char j;
bit b;
for(j = 0; j < 8; j++)
{
b = dat & 0x01;
dat >>= 1;

if(b)
{
ds = 0; i++; i++;
ds = 1;
i = 8; while(i>0) i--;
}
else
{
ds = 0;
i = 8; while(i>0) i--;
ds = 1;
i++; i++;
}
}
}

void sendChangeCmd()
{
dsInit();
dsWait();
delayMs(1);
writeByte(0xcc);
writeByte(0x44);
}

void sendReadCmd()
{
dsInit();
dsWait();
delayMs(1);
writeByte(0xcc);
writeByte(0xbe);
}

int getTmpValue()
{
unsigned int tmpvalue;
int value;
float t;
unsigned char low, high;
sendReadCmd();

low = readByte();
high = readByte();

tmpvalue = high;
tmpvalue <<= 8;
tmpvalue |= low;
value = tmpvalue;

\
t = value * 0.0625;
\
value = t * 100 + (value > 0 ? 0.5 : -0.5); //大于0加0.5, 小于0减0.5
return value;
}

void display(int v)
{
unsigned char count;
unsigned char datas[] = {0, 0, 0, 0, 0};
unsigned int tmp = abs(v);
datas[0] = tmp / 10000;
datas[1] = tmp % 10000 / 1000;
datas[2] = tmp % 1000 / 100;
datas[3] = tmp % 100 / 10;
datas[4] = tmp % 10;
writeComm(0xc0+3);
if(v < 0)
{
writeString("- ", 2);
}
else
{
writeString("+ ", 2);
}
if(datas[0] != 0)
{
writeData('0'+datas[0]);
}
for(count = 1; count != 5; count++)
{
writeData('0'+datas[count]);
if(count == 2)
{
writeData('.');
}
}
}
/**//*****************************DS18B20*******************************/

void main()
{
uchar table[] = " xianzaiwendu: ";
sendChangeCmd();
init();
writeComm(0x80);
writeString(table, 16);
while(1)
{
delayMs(1000); //温度转换时间需要750ms以上
writeComm(0xc0);
display(getTmpValue());
sendChangeCmd();
}
}

Answer 2

仿真实例 供参考

追问

差不多功能了，您能帮我改一下不用闹钟了，就一个温度上下值用蜂鸣器报警的吗