linux系统怎么加载raid驱动

 我来答

1个回答

#热议# 上班途中天气原因受伤算工伤吗？

百度网友30ad0b0
2016-04-11 · 知道合伙人数码行家

百度网友30ad0b0
知道合伙人数码行家

采纳数：1785 获赞数：1884

毕业于东北农业大学，硕士研究生学历，曾经做过市场推广，销售等行业,曾经在网络公司做过网络技术管理工作

向TA提问私信TA

关注

展开全部

一般情况想常用的服务器，ibm hp dell等，linux系统都会内置raid卡允动的，不需要自己安装驱动，至少我是很少碰见要装驱动的情况。如果发现安装时认不到硬盘。可以按照以下官方说明来安装驱动。有问题可以在上班时间HI我。都在线。

RHEL5, unlike previous RHEL version, requires additional steps for installing the OS onto an Intel(R) Embedded Server RAID Technology volume.
1) Create a RAID array using the Intel Embedded Server RAID Technology II RAID BIOS Configuration Utility.
2) Boot your system using RHEL disc one.
3) At boot prompt type “linux nostorage”
4) Proceed with the installation and you will see a screen which provides you with ?Add device? button.
5) Click “Add Device”, a list of all drivers will appear
6) Press F2 to select driver from floppy
7) Insert the floppy with the Installer DUD image
8 ) Select device that corresponds to the floppy drive (sda in case of USB floppy)
9) After the driver is loaded the list of all drivers will appear again
10) Scroll down the driver list and select. Update megaide driver? in the list
11) Click OK
12) The driver will be loaded and the list of detected devices will appear
13) Click Done
14) Complete installation with RHEL CD
望采纳