Question

简历翻译，需要翻译，请帮忙。谢谢！

项目描述：

由于分公司独立，需要单独进行质量认证才能继续得到客户的认可，为生产高品质刹车盘做准备。

东久线及亨特线的工艺方案
项目职务：

铸造工程师

项目职责：

做出一套设计图册，是刹车盘分线设计有据可依。在保证质量的前提下，统一工装模具的要求。
即要满足以下要求：
1、芯盒设计需要定规格，使之与射芯机及顶芯机构相吻合，设计方便；
2、区分不同刹车盘的工艺要求，做出分类标准工艺方案；
3、做出标准工艺型板布置图，为快速制造，统一浇道规格，方便批量制作。
4、满足人均每天一套工装的要求（芯盒图，型体图，工艺图，及各自零配件及装配图）

项目业绩：

通过两个月的方案探讨，完成了任务要求。
1、标准化了芯盒顶芯机构，使芯盒零配件标准化，方便选型；
2、分类了刹车盘结构，根据各自特色，制定了各自的工艺方案，降低了选择工艺方案的难度；
3、标准化了型板布置图，为机械大批量生产奠定了基础；
4、人均每天能够完成两套图纸设计。满足了生产要求。
通过方案的定型，还为推进一箱四件双层工艺奠定了基础。同时通过Magma模拟，成功解决了单片刹车盘的缩松缺陷（意外收获）。

PBR汽车支架开发
项目职务：

项目工程师

项目职责：

负责铸造工艺及Pro/E三维模具设计，Magma模拟，模具三维加工图及二维装配图纸制作，铸件材质定型，现场工艺文件及检验文件编写，铸件检验指导及进度跟踪协调，PPAP提交，现场培训等事宜。

项目业绩：

通过改变工艺流程，从三维到二维的工序转变，及Magma模拟的采用，节约了产品的试制时间。在三个月内就完成了样件的制作。全程三坐标出具的全尺寸报告，球化率的100%检测，在第五个月完成了铸件的PPAP提交，在同等条件下，比澳大利亚PBR工厂提前一个月完成样品提交，同时产品质量比其要好。使我们顺利成为PBR的主要供应商。

项目描述：

PBR汽车支架是PBR给马来西亚的一种新车型开发的一款新产品。澳大利亚PBR和我们工厂同时接到开发任务。需要在年底前完成小批量量产。为整车装配做准备。

附加信息：

2011年10~11月，在清华大学，经过教授们的系统回顾和总结，系统的通过理论和实际相结合，提高了铸造水平。通过了全国铸造协会组织的铸造工程师认证考试(笔试、面试、论文答辩)，取得了铸造工程师资格证书。
谢谢两位的帮助。
还有两段也请帮忙翻译一下，不胜感激！

Answer 1

To make a set of design atlas, is the brake disk line design according to the can depend on. On the premise of guarantee quality, unified tooling and requirements.
Which should satisfy the following requirements:
1, core box design need specifications, make it in conformity with the shoot core machine and top core mechanism, design is convenient;
2, to distinguish the different requirements of brake disc is a classification process;
3, make a standard process type board layout for the rapid manufacture, unified sprue specifications, convenient batch production.
4, meet the requirements of a set of tooling per person a day (core box diagram, type body figure, process diagram, and their spare parts and assembly drawings)

Project performance:

Through two months of the plan, completed the mission requirements.
1, standardized core box core mechanism, standardize core box parts, convenient selection;
2, the classification of the brake disc structure, according to their respective characteristics, developed their own process, reduce the difficulty of the selection process;
3, arrangement plan of the standardized templates, which laid a foundation for mechanical mass production;
4, able to complete two sets of drawings design per person a day. Meet the production requirements.
By solution of finalize the design, but also to promote a box of four double process laid a solid foundation. By Magma simulation at the same time, successfully resolved the shrinkage defects of single brake disc (bonus).

PBR car support development
Project duties:

Project engineer

Project responsibilities:

Responsible for casting process and Pro/E 3 d mold design, Magma simulation, figure mold 3 d and 2 d assembly drawing production, casting materials, on-site process document and inspection documentation, casting inspection instruction and progress tracking coordination, PPAP submission, on-site training, etc.

Project performance:

By changing the technological process, from 3 d to 2 d process transformation, and Magma simulation, managing product development time. Can finish the samples in three months. All full size report issued three coordinates, spheroidizing ratio test, 100% of the finished castings in the fifth month of PPAP submission, in the same condition, than Australia PBR factory finished samples submitted one month in advance, at the same time, product quality is better than it. To enable us to become the main supplier of PBR smoothly.

Project description:

PBR car bracket is PBR to Malaysia to develop a new model of a new product. Australia's PBR and our factory received the development tasks at the same time. Needs to be done before the end of the small batch production. To prepare for the vehicle assembly.

Additional information:

10 ~ 11, 2011, in tsinghua university, after a systematic review and summarization of the professors, system by combining theory with practice, improve the level of the casting. Through the China foundry association organization foundry engineer certification exam (written test, interview, the thesis), made a casting engineer's qualification certificate.

Answer 2

Project Description:

As an independent branch, you need to separate in order to continue to receive quality certification recognized by customers for the production of high quality brake discs ready.

East long lines and Hunter line technology program
Project Title:

Casting Engineer

Project responsibilities:

Make a set of design drawings, is a sub-line brakes design evidence-based. Under the premise of guaranteeing quality, unified tooling requirements.
That is, to meet the following requirements:
1, the core box design needs to set specifications, and make the core shooting machine and the top core institutions coincide designed to facilitate;
2, the distinction between different technological requirements brakes, standard process to make classification scheme;
3, make a standard process template layout for rapid manufacturing, unified runner specifications, to facilitate mass production.
4, a set of tooling to meet the requirements of daily per capita (core box diagram, type body diagram, process chart, and their respective parts and assembly drawings)

Project results:

Through two months of study programs, completed the mission requirements.
1, standardized core box top core institutions so that the core box parts standardization, easy selection;
2, the classification of the brake disc structure, according to their own characteristics, to develop their own technology solutions to reduce the difficulty of the selection process scheme;
3, standardized template layout for mechanical mass production basis;
4, per capita per day to complete two sets of design drawings. Meet the production requirements.
Stereotypes through the program, but also for a box of four double advancing technology foundation. The same time through Magma simulation, the successful resolution of a monolithic disc shrinkage defects (windfall).

PBR Automotive stent development
Project Title:

Project Engineer

Project responsibilities:

Responsible for casting and Pro / E three-dimensional mold design, Magma simulation, two-dimensional drawings and three-dimensional processing mold assembly drawing production, casting materials stereotypes, site inspection process documents and document preparation, casting inspection guidance and tracking the progress of coordination, PPAP submission, on-site training etc..

Project results:

By changing the process, from 3D to 2D transformation process, and the adoption of Magma simulation, time saving product trial. In the three months to complete the sample production. Coordinate the entire report issued by the full-size, the ball 100% detection rate in the first five months of the completion of the casting PPAP submission, under the same conditions, more than one month in advance to complete the Australian PBR plant samples submitted, while product quality than its better. So that we successfully become a major supplier of PBR.

Project Description:

PBR PBR to the Malaysian car holder is a new model developed a new product. Australian PBR and our factory also received development tasks. Need to be completed before the end of small batch production. Prepare for the vehicle assembly.

Additional information:

10 November 2011, at Tsinghua University, after professors systematic review and summary of the system through a combination of theory and practice to improve the casting level. Through the National Association of casting foundry engineer certification exams (written tests, interviews, thesis), made casting engineer qualification certificates.

To edit an answer or insert a picture, please click on the title to the problem details page

Answer 3

朋友，你好，俺能翻译此份简历。俺是英语专业的，人工翻译给你。要是翻译的话，加一下俺吧。。。俺经常翻译各种资料的。