Question

新手，问各位大侠一个protel99se 关于RDC检测的问题，出现错误如下，要怎么解决，谢谢

Processing Rule : Clearance Constraint (Gap=0.8mm) (On the board ),(On the board )
Violation between Track (100.35602mm,98.30003mm)(104.49979mm,98.30003mm) Top Layer and
Pad R20-2(104.00002mm,99.55003mm) Top Layer
Violation between Track (104.49979mm,98.30003mm)(105.00002mm,98.30003mm) Top Layer and
Pad R20-2(104.00002mm,99.55003mm) Top Layer
Violation between Track (105.00002mm,98.30003mm)(106.40002mm,98.30003mm) Top Layer and
Pad R20-2(104.00002mm,99.55003mm) Top Layer
Violation between Track (100.35602mm,98.30003mm)(104.49979mm,98.30003mm) Top Layer and
Pad R20-1(104.00002mm,96.85003mm) Top Layer
Violation between Track (104.49979mm,98.30003mm)(105.00002mm,98.30003mm) Top Layer and
Pad R20-1(104.00002mm,96.85003mm) Top Layer
Violation between Track (105.00002mm,98.30003mm)(106.40002mm,98.30003mm) Top Layer and
Pad R20-1(104.00002mm,96.85003mm) Top Layer
Violation between Track (100.60002mm,112.80003mm)(102.4mm,114.60001mm) Top Layer and
Pad R8-2(104.00002mm,115.95003mm) Top Layer
Rule Violations :500

Answer 1

间距超出限制 你是0.8的安全距离 但是有的地方布线太近了