Question

思科模拟器路由设置问题

由pc0 ping 服务器ping不同，求指导
如图，pc0 ip192.168.2.3 pc1 ip 192.168.2.2 服务器的ip 192.168.3.2 路由器cliRouter>enableRouter#configConfiguring from terminal, memory, or network [terminal]? Enter configuration commands, one per line. End with CNTL/Z.Router(config)#interface fa0/0Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#ip address 192.168.2.4 255.255.255.0 Router(config)#interface fa0/1Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
Router(config-if)#ip address 192.168.3.4% Incomplete command.Router(config-if)#ip address 192.168.3.4 255.255.255.0Router(config-if)#endRouter#%SYS-5-CONFIG_I: Configured from console by console
Router#confRouter(config)#router ripRouter(config-router)#network 192.168.3.0Router(config-router)#network 192.168.2.0Router(config-router)#version 2Router(config-router)#exitRouter(config)#

Answer 1

你这个根本不需要配动态路由啊，都是直连网段。看你的配置，路由器上没问题，现在就看你的pc和server有没有配网关了。

Answer 2

这个还用配rip吗
pc上配网关了吗？