Question

两个网段怎么配置一个DHCP服务器?

两个网段的网络.我们老师让我们用一个DHCP服务器配置,请问怎么配置?
我们学校就有个这样的DHCP服务器.老师让我们想想.问问大家.

Answer 1

（1）简单实现DHCP多作用域
对于多作用域的配置，必须保证DHCP服务器能够侦听所有子网客户机的请求信息，下面将讲解配置多作用域的基本方法，为DHCP添加多个网卡连接每个子网，并发布多个作用域的声明。
注意：划分子网时，如果选择直接配置多作用域实现动态IP分配的任务，则必须要为DHCP服务器添加多块网卡，并配置多个IP地址，否则DHCP服务器只能分配与其现有网卡IP地址对应网段的作用域。
采用双网卡实现两个作用域
1）网卡配置IP地址
DHCP服务器有多块网卡时，需要使用ifconfig命令为每块网卡配置独立的IP地址，但要注意，IP地址配置的网段要与DHCP服务器发布的作用域对应哈~
ifconfig eth0 192.168.2.1 netmask 255.255.255.0
ifconfig eth1 192.168.3.1 netmask 255.255.255.0
2）编辑dhcpd.conf主配置文件
当DHCP服务器网络环境搭建完毕后，可以编辑dhcpd.conf主配置文件完成多作用域的设置。
ddns-update-style none;
ignore client-updates;
subnet 192.168.2.0 netmask 255.255.255.0 {
# --- default gateway
option routers 192.168.2.1;
option subnet-mask 255.255.255.0;
option nis-domain "domain.org";
option domain-name "domain.org";
option domain-name-servers 192.168.2.2;
option time-offset -18000; # Eastern Standard Time
# option ntp-servers 192.168.1.1;
# option netbios-name-servers 192.168.1.1;
# --- Selects point-to-point node (default is hybrid). Don't change this unless
# -- you understand Netbios very well
# option netbios-node-type 2;
range dynamic-bootp 192.168.2.50 192.168.2.250;
default-lease-time 21600;
max-lease-time 43200;
# we want the nameserver to appear at a fixed address
host ns {
next-server marvin.redhat.com;
hardware ethernet 12:34:56:78:AB:CD;
fixed-address 207.175.42.254;
}
}
subnet 192.168.3.0 netmask 255.255.255.0 {
# --- default gateway
option routers 192.168.3.1;
option subnet-mask 255.255.255.0;
option nis-domain "domain.org";
option domain-name "domain.org";
option domain-name-servers 192.168.2.2;
option time-offset -18000; # Eastern Standard Time
# option ntp-servers 192.168.1.1;
# option netbios-name-servers 192.168.1.1;
# --- Selects point-to-point node (default is hybrid). Don't change this unless
# -- you understand Netbios very well
# option netbios-node-type 2;
range dynamic-bootp 192.168.3.50 192.168.3.250;
default-lease-time 21600;
max-lease-time 43200;
max-lease-time 43200;
}
保存退出。
3）测试验证
重启DHCP服务后检查系统日志，检测配置是否成功，使用tail命令动态显示日志信息。
tail -F /etc/log/messages
经过设置，对于DHCP服务器将通过eth0和eth1两块网卡侦听客户机的请求，并发送相应的回应。
Jan 19 16:02:51 rhel5 dhcpd: DHCPDISCOVER from 00:19:21:bd:a3:da via eth1
Jan 19 16:02:51 rhel5 dhcpd: DHCPDISCOVER from 00:19:21:bd:a3:da via eth0
Jan 19 16:02:52 rhel5 dhcpd: DHCPOFFER . 192.168.3.250 to 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:52 rhel5 dhcpd: DHCPOFFER . 192.168.2.250 to 00:19:21:bd:a3:da (mis) via eth0
Jan 19 16:02:52 rhel5 dhcpd: DHCPREQUEST for 192.168.3.250 (192.168.3.1) from 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:52 rhel5 dhcpd: DHCPACK . 192.168.3.250 to 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:52 rhel5 dhcpd: DHCPREQUEST for 192.168.3.250 (192.168.3.1) from 00:19:21:bd:a3:da (mis) via eth0: ignored (not authoritative).
Jan 19 16:02:53 rhel5 dhcpd: DHCPDISCOVER from 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:53 rhel5 dhcpd: DHCPOFFER . 192.168.3.250 to 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:53 rhel5 dhcpd: DHCPDISCOVER from 00:19:21:bd:a3:da (mis) via eth0
Jan 19 16:02:53 rhel5 dhcpd: DHCPOFFER . 192.168.2.250 to 00:19:21:bd:a3:da (mis) via eth0
Jan 19 16:02:53 rhel5 dhcpd: DHCPREQUEST for 192.168.3.250 (192.168.3.1) from 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:53 rhel5 dhcpd: DHCPACK . 192.168.3.250 to 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:53 rhel5 dhcpd: DHCPREQUEST for 192.168.3.250 (192.168.3.1) from 00:19:21:bd:a3:da (mis) via eth0: ignored (not authoritative).
Jan 19 16:02:54 rhel5 dhcpd: DHCPDISCOVER from 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:54 rhel5 dhcpd: DHCPOFFER . 192.168.3.250 to 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:54 rhel5 dhcpd: DHCPDISCOVER from 00:19:21:bd:a3:da (mis) via eth0
Jan 19 16:02:54 rhel5 dhcpd: DHCPOFFER . 192.168.2.250 to 00:19:21:bd:a3:da (mis) via eth0
Jan 19 16:02:54 rhel5 dhcpd: DHCPREQUEST for 192.168.3.250 (192.168.3.1) from 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:54 rhel5 dhcpd: DHCPACK . 192.168.3.250 to 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:54 rhel5 dhcpd: DHCPREQUEST for 192.168.3.250 (192.168.3.1) from 00:19:21:bd:a3:da (mis) via eth0: ignored (not authoritative).
Jan 19 16:02:55 rhel5 dhcpd: DHCPDISCOVER from 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:55 rhel5 dhcpd: DHCPOFFER . 192.168.3.250 to 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:55 rhel5 dhcpd: DHCPDISCOVER from 00:19:21:bd:a3:da (mis) via eth0
Jan 19 16:02:55 rhel5 dhcpd: DHCPOFFER . 192.168.2.250 to 00:19:21:bd:a3:da (mis) via eth0
Jan 19 16:02:55 rhel5 dhcpd: DHCPREQUEST for 192.168.3.250 (192.168.3.1) from 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:55 rhel5 dhcpd: DHCPACK . 192.168.3.250 to 00:19:21:bd:a3:da (mis) via eth1
Jan 19 16:02:55 rhel5 dhcpd: DHCPREQUEST for 192.168.3.250 (192.168.3.1) from 00:19:21:bd:a3:da (mis) via eth0: ignored (not authoritative).

Answer 2

原理
　　 使用DHCP方式获取IP地址需要利用广播数据包，按正常情况，DHCP服务只能在同一广播域内实现。而VLAN的建立就是为了隔离广播包，为什么在三层交换机上可以实现DHCP的跨网段呢?这需要我们将DHCP请求的广播数据包转化为单播请求，才会通过三层路由把请求转发到DHCP服务器所在的VLAN，进而实现DHCP的跨VLAN服务。
　　 实现方法
　　 为了实现跨VLAN的DHCP服务，需要从两方面入手，一方面要在交换机上指明DHCP服务器的IP地址，另一方面要在DHCP服务器上创建新的作用域。
　　 下面以Cisco的Catlyst 4506为例介绍具体的操作步骤：
　　 1.在交换机上配置DHCP服务器：
　　 ip dhcp-server 192.168.0.69
　　 2.在交换机中为每个VLAN设置同样的DHCP服务器的IP地址：
　　 interface Vlan11
　　 ip address 192.168.1.254 255.255.255.0
　　 ip helper-address 192.168.0.69 DHCP Server IP
　　 interface Vlan12
　　 ip address 192.168.2.254 255.255.255.0
　　 ip helper-address 192.168.0.69 DHCP Server IP
　　 3.在DHCP服务器上设置网络地址分别为192.168.1.0、192.168.2.0的作用域，并将这些作用域的“路由器”选项设置为对应VLAN的接口IP地址。