openwrt系统中,uboot在引导内核和挂载文件系统的时候出现问题,跪求大侠指点!!
[0.840000]Creating4MTDpartitionson"spi32766.0":[0.850000]0x000000000000-0x00000003000...
[ 0.840000] Creating 4 MTD partitions on "spi32766.0":
[ 0.850000] 0x000000000000-0x000000030000 : "u-boot"
[ 0.860000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 0.880000] 0x000000040000-0x000000050000 : "factory"
[ 0.890000] 0x000000050000-0x000000800000 : "firmware"
[ 0.900000] (unregistered net_device): port 0 link up (100Mbps/Full duplex)
[ 0.920000] libphy: mdio: probed
[ 0.920000] ralink_soc_eth 10100000.ethernet: connected port 4 to PHY at mdio-bus:04 [uid=03a2940d, driver=Generic PHY]
[ 0.950000] ralink_soc_eth 10100000.ethernet: connected port 5 to PHY at mdio-bus:05 [uid=0000ffff, driver=Generic PHY]
[ 0.970000] ralink_soc_eth 10100000.ethernet: loaded mt7530 driver
[ 0.980000] eth0: done loading
[ 0.990000] rt3xxx-usbphy ubsphy.3: loaded
[ 1.000000] rt2880_wdt 10000120.watchdog: Initialized
[ 1.010000] TCP: cubic registered
[ 1.020000] NET: Registered protocol family 17
[ 1.020000] 8021q: 802.1Q VLAN Support v1.8
[ 1.030000] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[ 1.050000] Please append a correct "root=" boot option; here are the available partitions:
[ 1.070000] 1f00 192 mtdblock0 (driver?)
[ 1.080000] 1f01 64 mtdblock1 (driver?)
[ 1.090000] 1f02 64 mtdblock2 (driver?)
[ 1.100000] 1f03 7872 mtdblock3 (driver?)
[ 1.110000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) 展开
[ 0.850000] 0x000000000000-0x000000030000 : "u-boot"
[ 0.860000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 0.880000] 0x000000040000-0x000000050000 : "factory"
[ 0.890000] 0x000000050000-0x000000800000 : "firmware"
[ 0.900000] (unregistered net_device): port 0 link up (100Mbps/Full duplex)
[ 0.920000] libphy: mdio: probed
[ 0.920000] ralink_soc_eth 10100000.ethernet: connected port 4 to PHY at mdio-bus:04 [uid=03a2940d, driver=Generic PHY]
[ 0.950000] ralink_soc_eth 10100000.ethernet: connected port 5 to PHY at mdio-bus:05 [uid=0000ffff, driver=Generic PHY]
[ 0.970000] ralink_soc_eth 10100000.ethernet: loaded mt7530 driver
[ 0.980000] eth0: done loading
[ 0.990000] rt3xxx-usbphy ubsphy.3: loaded
[ 1.000000] rt2880_wdt 10000120.watchdog: Initialized
[ 1.010000] TCP: cubic registered
[ 1.020000] NET: Registered protocol family 17
[ 1.020000] 8021q: 802.1Q VLAN Support v1.8
[ 1.030000] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[ 1.050000] Please append a correct "root=" boot option; here are the available partitions:
[ 1.070000] 1f00 192 mtdblock0 (driver?)
[ 1.080000] 1f01 64 mtdblock1 (driver?)
[ 1.090000] 1f02 64 mtdblock2 (driver?)
[ 1.100000] 1f03 7872 mtdblock3 (driver?)
[ 1.110000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) 展开
2个回答
推荐律师服务:
若未解决您的问题,请您详细描述您的问题,通过百度律临进行免费专业咨询