Question

s3c2410内核移植问题!

平台S3c2410,内核2.6.17.14,编译器是arm-linux-gcc-3.4.1出现如下的提示就不动了!!!帮帮忙大哥哥们!!1
VIVI version 0.1.4 (root@localhost.localdomain) (gcc version 2.95.3 20010315 (release)) #0.1.4 Sun Jul 2 18:43:06 EDT 2006
MMU table base address = 0x33FBC000
Succeed memory mapping.
+---------------------------------------------+
| S3C2410X USB Downloader ver R1.11 SEP/03/02 |
+---------------------------------------------+
FCLK=200MHz,DMA mode
USB: IN_ENDPOINT:1 OUT_ENDPOINT:3
FORMAT: <ADDR(DATA):4>+<SIZE(n+10):4>+<DATA:n>+<CS:2>
NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)
Found saved vivi parameters.
Press Return to start the LINUX/Wince now, any other key for vivi
Copy linux kernel from 0x00050000 to 0x30008000, size = 0x00100000 ... done
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "noinitrd root=/dev/mtdblock3 init=/linuxrc console=ttySAC0,115200"
MACH_TYPE = 193
NOW, Booting Linux......
Uncompressing Linux.................................................................. done, booting the kernel.
我不知道menuconfig中的设置是否有问题,应该如果设置.?

Answer 1

console=ttySAC0，换成ttyS0看看，还有就是你的内核烧写位置正确吗？