英语翻译(电脑问题) 150
我的电脑CPU主频原来是1.75,换了一块主板后,把主频调到1.1才能正常使用,那个外频是用133。如果调到默认的主频就马上死机,主板是支持这种CPU的,显卡也没问题,C...
我的电脑CPU主频原来是1.75,换了一块主板后,把主频调到1.1才能正常使用,那个外频是用133。如果调到默认的主频就马上死机,主板是支持这种CPU的,显卡也没问题,CPU温度也没问题,电池换过两个也没办法搞好,急啊!
当我进到BIOS后,看见调CPU参数旁边有红色的感叹号(警示作用),英文如下!!!warning !!! manually setting theCPU host frequency is for over clock only . you must set the FBS jumper on mother board with corresponding FSB to yourCPU first,then you con manually adjust the CPU host frequency
满意加150分QQ 50145606 跪求~~ 展开
当我进到BIOS后,看见调CPU参数旁边有红色的感叹号(警示作用),英文如下!!!warning !!! manually setting theCPU host frequency is for over clock only . you must set the FBS jumper on mother board with corresponding FSB to yourCPU first,then you con manually adjust the CPU host frequency
满意加150分QQ 50145606 跪求~~ 展开
6个回答
展开全部
I have an urgent problem that requires immediate fix.
My CPU host frequency was originally set to 1.75Ghz. After I replaced the motherbooard, I had to alter the host frequency to 1.1Ghz with an external frequency of 133Mhz to maintain the normal operation of my machine. If I used the default host frequency 1.75Ghz, the machine crashed right away. I do not know how to fix this problem because my CPU is compatible with the motherboard and video card. Further, there is nothing wrong with the CPU temperature. I tried to solve the problem by replacing the battery twice, but the same problem persisted. When I looked up the BIOS configuraiton, I saw a warning message. The message is preceded by a red alarmining signal indicated by exclamation marks. The content of the message is as follows.
!!!warning !!! manually setting theCPU host frequency is for over clock only . you must set the FBS jumper on mother board with corresponding FSB to yourCPU first,then you con manually adjust the CPU host frequency
My CPU host frequency was originally set to 1.75Ghz. After I replaced the motherbooard, I had to alter the host frequency to 1.1Ghz with an external frequency of 133Mhz to maintain the normal operation of my machine. If I used the default host frequency 1.75Ghz, the machine crashed right away. I do not know how to fix this problem because my CPU is compatible with the motherboard and video card. Further, there is nothing wrong with the CPU temperature. I tried to solve the problem by replacing the battery twice, but the same problem persisted. When I looked up the BIOS configuraiton, I saw a warning message. The message is preceded by a red alarmining signal indicated by exclamation marks. The content of the message is as follows.
!!!warning !!! manually setting theCPU host frequency is for over clock only . you must set the FBS jumper on mother board with corresponding FSB to yourCPU first,then you con manually adjust the CPU host frequency
展开全部
应该是要用一个跳线来支持你的那个CPU频率,你翻下主板手册,应该有介绍,找找看那些跳线的说明。
已赞过
已踩过<
评论
收起
你对这个回答的评价是?
展开全部
手动设置主机的CPU频率超过最大限制。您必须设定跳线与主板有相应的安全关联,以你的CPU为第一,那么你控制手动调整CPU的频率就行了
已赞过
已踩过<
评论
收起
你对这个回答的评价是?
展开全部
警告!手动设置CPU主频率超过最大限制。您必须设定主板上的相应的FSB(Front Side BUS前段总线)至你的最高主频处,,然后你才能调整CPU的频率。
参考资料: http://baike.baidu.com/view/22256.html?wtp=tt
已赞过
已踩过<
评论
收起
你对这个回答的评价是?
展开全部
看一下主板的说明书,找到有关cpu外频的跳线,改到相应的位置上,就可以了
已赞过
已踩过<
评论
收起
你对这个回答的评价是?
推荐律师服务:
若未解决您的问题,请您详细描述您的问题,通过百度律临进行免费专业咨询