Question

ccs工程的头文件找不到，怎么回事

Answer 1

1、要在Memory Section Manager属性中为“Segment For DSP/BIOS Objects” 和 “Segment For malloc()/free()”分配Dynamic Memory Heaps，必须首先在要分配的段（比如，IRAM）中勾选“create a heap in this memory“，并给出heaps size。

2、要把*.tcf文件生成的*.cmd文件手动加入工程中，否则编译报错如下：

------------------------------ test.pjt - Debug ------------------------------
Warning: The project has no cmd file while the Text Linker is selected
[Linking...] "D:\CCStudio_v3.3\C6000\cgtools\bin\cl6x" -@"Debug.lkf"
<Linking>
>> warning: creating output section .gblinit without SECTIONS specification
>> warning: creating output section .mem without SECTIONS specification
>> warning: creating output section .rtdx_data without SECTIONS specification
>> warning: creating output section .sys without SECTIONS specification
>> warning: creating output section .clk without SECTIONS specification
>> warning: creating output section .hst1 without SECTIONS specification
>> warning: creating output section .hst without SECTIONS specification
>> warning: creating output section .pip without SECTIONS specification
>> warning: creating output section .hst0 without SECTIONS specification
>> warning: creating output section .hwi_vec without SECTIONS specification
>> warning: creating output section .swi without SECTIONS specification
>> warning: creating output section .printf without SECTIONS specification
>> warning: creating output section .sts without SECTIONS specification
>> warning: creating output section .tsk without SECTIONS specification
>> warning: creating output section .TSK_idle$stk without SECTIONS specification
>> warning: creating output section .idlcal without SECTIONS specification
>> warning: creating output section .idl without SECTIONS specification
>> warning: creating output section .LOG_system$buf without SECTIONS
specification
>> warning: creating output section .log without SECTIONS specification
>> warning: creating output section .sysinit without SECTIONS specification
>> warning: creating output section .vers without SECTIONS specification
>> warning: entry point symbol _c_int00 undefined

undefined first referenced
symbol in file
--------- ----------------
SWI_D_rdytab d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
IRAM$B d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_EXC_init d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_GBL_procId d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
__HOOK_knlId d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_KNL_exit d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
IRAM$L d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
TSK_VCREATEFXN d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_UTL_doError d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
PIP_F_start d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
GBL_boot d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
TSK_VDELETEFXN d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
KNL_glue d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_UTL_doAbort d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
IDL_F_loop d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_CLK_DFLTMICROSECS d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_GBL_cacheInit64P d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_EXC_dispatch d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_CLK_htimePerLtime d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
GBL_stackbeg d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_CLK_D_tddr d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_UTL_doPutc d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_MEM d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
PRD_F_tick d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
__HOOK_NUMHOOKS d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_CLK_D_microseconds d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
RTA_F_or d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
TRC_R_mask d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
GBL_stackend d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_c_int00 d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_TSK_config d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_OBJ_table d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
HWI_A_VECS d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_FXN_F_nop d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_CLK_enableTimer d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_CLK_D_prd d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
IDL_D_calibrate d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_TSK d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_KNL_run d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
LNK_dspFrameRequestMask d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
CLK_F_isr d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
PIP_D_tabbeg d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
TRC_cinit d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_UTL_halt d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_MEM_init d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
RTA_F_dispatch d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_TSK_startup d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_TSK_setup d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_KNL_queues d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
CLK_A_TABBEG d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
LNK_F_dataPump d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
TSK_VEXITFXN d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
HWI_F_dispatch d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_RTDX_Poll d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_TSK_init d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
IDL_D_busyObj d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_TSK_exit d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
SWI_F_enable d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
FXN_F_run d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_GBL_getVersion d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_CLK_inputClock d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
GBL_initdone d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
_HWI_dispatchTab d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
LNK_dspFrameReadyMask d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
IDL_F_busy d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj
>> error: symbol referencing errors - './Debug/test.out' not built

>> Compilation failure

Build Complete,
2 Errors, 23 Warnings, 0 Remarks.

3、
[main.c] "D:\CCStudio_v3.3\C6000\cgtools\bin\cl6x" -g -pdsw225 -fr"D:/CCStudio_v3.3/MyProjects/test/Debug" -d"_DEBUG" -me -mv6400+ -@"Debug.lkf" "main.c"
"main.c", line 20: warning: function declared implicitly

[Linking...] "D:\CCStudio_v3.3\C6000\cgtools\bin\cl6x" -@"Debug.lkf"
<Linking>

Build Complete,
0 Errors, 1 Warnings, 0 Remarks.

warning 的原因是对应行的元素没有声明。
解决办法就是加入声明。

举例如下：
#include <std.h>
#include <string.h>
//#include <stdio.h> //打开该句就可以了

void main(void)
{
unsigned int i;
unsigned int sum=0;

for(i = 0; i<=100; i++ )
{
sum += i;
}
printf("the sum = %d .\n",sum);
printf("the program run over!\n");

printf("the program run over!\n");