MACD是个很经黄的指标。同时也有很多用法。我搜集了相关的源码，供大家参考 ，喜欢就点个关注。今后为你提供更多的分享。
公式源码，默认是使用在通达信中，但是其他的软件一般也能兼容的。选出股票后能否买入依然还要综合参考大趋势和其它指标。金叉并非万能，有时刚刚进入金叉或准金叉状态，也可能是上一波反弹的结束，下一波下跌的开始。只有当金叉周期的前后周期均为上涨趋势，金叉的威力才最大。
业绩的持续增长才是技术指标的前提和保证。
1、0轴上方第一次金叉选股公式：
DIFF:=EMA(CLOSE,12) - EMA(CLOSE,26);
DEA := EMA(DIFF,9);
MACD := 2*(DIFF-DEA);
xg:cross(diff,dea) and dea>-1.0 and dea<0.5 and CLOSE>ref(CLOSE,1) and CLOSE>=ma(c,60);
或：
DIF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIF,9);
XG:DIF>0 AND DEA>0 AND CROSS(DIF,DEA);
2、0轴上方二次金叉的选股公式：
JC:IF(SUM(IF(MACD>0 AND CROSS(MACD.DIF,MACD.DEA),1,0),0)-HHV(IF(IF(CROSS(MACD.DEA,0),1,0),
SUM(IF(MACD>0 AND CROSS(MACD.DIF,MACD.DEA),1,0),0),0),0)=2 AND SUM(IF(MACD>0 AND CROSS(MACD.DIF,MACD.DEA),1,0),
0)>REF(SUM(IF(MACD>0 AND CROSS(MACD.DIF,MACD.DEA),1,0),0),1),10,0);
{选股设JC=10即可}
3.0轴下方一次金叉的选股公式：
DIFF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=(DIFF-DEA)*2;
低位金叉:CROSS(DIFF,DEA) AND DIFF<-0.1;
4、0轴下方二次金叉且第二次金叉高于第一次金叉：
DIF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIF,9);
AA:=BARSLAST(REF(CROSS(DIF,DEA),1));
二次金叉:CROSS(DIF,DEA) AND DIF>REF(DIF,AA+1) AND AA<20 AND DIF<0;
5、0轴下方二次金叉选股公式：
DIFF:=EMA(CLOSE,12) - EMA(CLOSE,26); {选股设JC=10即可}
DEA:=EMA(DIFF,9);
MACD:=2*(DIFF-DEA);
A:=IF(CROSS(0,DEA),1,0);
A1:=IF(DIFF<0 AND CROSS(DIFF,DEA),1,0);
SS:=IF(A,SUM(A1,0),0);
SSB:=HHV(SS,0);
SSS:=SUM(A1,0);
JC:IF(SSS-SSB=2 AND SSS>REF(SSS,1),10,0);
6、缩量横盘突破选股：
WH01:=(HHV(C,10)-LLV(C,10))/LLV(C,10)*100<=10;
WH02:=SUM(VOL,10)/CAPITAL*100<45;
WH03:=REF(WH01,1);
WH04:=HHVBARS(HIGH,55)>20 OR C=HHV(H,55);
WH05:=WH02 AND WH03 AND WH04 AND C>REF(HHV(H,10),1);
WH05 AND REF(NOT(WH05),1);
7、均线、KDJ、MACD金叉的预警选股公式
完全符合以下条件：
1、5日线上穿10日线
2、MACD金叉
3、KDJ金叉（KDJ数值由9、3、3调整为8、2、2）
4、成交量指标金叉
通达信预警选股公式
A1:=CROSS(MA(C,5),MA(C,10));
A2:=CROSS(MACD.DIF,MACD.DEA);
A3:=CROSS(KDJ.K(8,2,2),KDJ.D(8,2,2));
A4:=CROSS(MA(V,5),MA(V,10));
XG:A1 AND A2 AND A3 AND 4;
三金叉选股完整源码，绝无未来函数
均线、成交量、MACD同时金叉
MA1:=MA(CLOSE,5);
MA2:=MA(CLOSE,10);
AA:=CROSS(MA1,MA2);
AAA:=COUNT(AA,3)>=1;
T1:=MA(VOL,5);
T2:=MA(VOL,10);
BB:=CROSS(T1,T2);
BBB:=COUNT(BB,3)>=1;
DIF:=EMA(CLOSE,12) - EMA(CLOSE,26);
DEA:=EMA(DIF,9);
MACD:=(DIF-DEA)*2;
CC:=CROSS(DIF,DEA);
CCC:=COUNT(CC,3)>=1;
三金:=AAA AND BBB AND CCC;
三金叉:FILTER(三金,3),COLORFF00FF;
使用说明：该选股公式适合超级短线，快进快出具有一定的风险因素，此时的股价往往处于拉高拔升阶段。
要求使用者特别关注股价所处的位置，如果过于高位防止庄家诱多。低位可大胆搏杀，短期回档被套也有回旋余地。
8、四线粘合
N1:=5;N2:=10;N3:=20;M:=1;
MA1:=MA(C,N1);MA2:=MA(C,N2);MA3:=MA(C,N3);
A3:=V>REF(V,1)*1.5 AND V>MA(V,5);
MAX(MA1,MAX(MA2,MA3))/MIN(MA1,MIN(MA2,MA3))<1+0.01*M
AND C>O AND V> REF(V,1) AND FINANCE(7)<=300000000
AND A3 AND CAPITAL<=300000000;
9、均线粘合
M:=1;
M5:=MA(CLOSE,5);
M10:=MA(CLOSE,10);
M20:=MA(CLOSE,20);
K1:=MAX(MAX(M5,M10),MAX(M10,M20));
K2:=MIN(MIN(M5,M10),MIN(M10,M20));
A:=MAX(M5,MAX(M10,M20))/MIN(M5,MIN(M10,M20))<1+0.01*M;
A1:=(K1/K2-1)<0.005;
A2:=(K1/K2-1)<0.005;
A3:=V>REF(V,1)*1.5 AND V>MA(V,5);
XG:A AND A1 AND A2 AND A3 ;
10、多线粘合
V0:=EMA(C,5);
V1:=EMA(C,10);
V2:=EMA(C,15);
V3:=EMA(C,30);
V4:=EMA(C,60);
M1:=1000*V1/V4<=1015 AND 1000*V1/V4>=975;
M2:=1000*V2/V4<=1020 AND 1000*V2/V4>=980;
M3:=1000*V3/V4<=1015 AND 1000*V3/V4>=985;
M4:=M1 AND M2 AND M3 AND CROSS(V0,V1);
M5:=M1 AND M2 AND M3 AND CROSS(V0,V3);
M4 OR M5;
11、MACD天天挣钱选股指标公式
DIFF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
XG:CROSS(REF(DEA,1),REF(DIFF,1)) AND CROSS(DIFF,DEA);
12、短线之王
VAR1:=(-100)*(HHV(HIGH,3)-CLOSE)/(HHV(HIGH,3)-LLV(LOW,3));
CROSS(VAR1,-87) AND OPEN<MA(CLOSE,5) AND CLOSE>=1.099*REF(CLOSE,1) AND INDEXC>0.98*REF(INDEXC,1) AND CLOSE<=1.47*LLV
(CLOSE,58);
13、自用短线MACD 副图
DIF:EMA(CLOSE,3)-EMA(CLOSE,7);
DEA:EMA(DIF,3);
MACD:(DIF),COLORSTICK;
DIF,COLORGREEN,LINETHICK2;
DEA,COLORGREEN,LINETHICK2;
线上金叉买:0,COLORGREEN,LINETHICK2;
IF(DIF>DEA,DIF,DRAWNULL),COLORRED,LINETHICK2;
IF(DEA>REF(DEA,1),DEA,DRAWNULL),COLORMAGENTA,LINETHICK2;
DRAWICON(CROSS(DIF,DEA),DEA,25);
DRAWICON(CROSS(DEA,DIF),DEA,24);
14 、MACD低位反转点
DIF:EMA(CLOSE,12)-EMA(CLOSE,135);
DEA:=EMA(DIF,9);
MACD:=(DIF-DEA)*2;
反转:MACD<0 AND MACD>REF(MACD ,1) AND REF(MACD ,1)<REF(MACD ,2)
AND REF(MACD ,2)<REF(MACD ,3)
AND REF(MACD ,3)<REF(MACD ,4);
15.冠军MACD资金流向
DIFF:=EMA(CLOSE,3)-EMA(CLOSE,7);
DEA:=EMA(DIFF,3);
MACD2:=2*(DIFF-DEA);
(CLOSE<0 AND CROSS(DIFF,0),H*1.3),COLOR000080,NODRAW;
(CLOSE<0 AND CROSS(MACD2,0),H*1.3),COLOR000080,NODRAW;
(CLOSE<0 AND CROSS(0,DIFF),H*1.3),COLOR808080,NODRAW;
(CLOSE<0 AND CROSS(0,MACD2),H*1.3),COLOR808080,NODRAW;
DU0:=CROSS(DIFF,0);
UD0:=CROSS(0,DIFF);
TDU0:=BARSLAST(DU0);
TUD0:=BARSLAST(UD0);
DU3:=REF(DU0,1);
UD3:=REF(UD0,1);
TDU3:=BARSLAST(DU3);
TUD3:=BARSLAST(UD3);
UDGLINE:=IF(TDU3<TUD3,REF(HHV(HIGH,2),TDU3),REF(LLV(LOW,2),TUD3));
JDU0:=REF(CLOSE,1)<=REF(UDGLINE,1) AND CLOSE>UDGLINE AND TDU0<TUD0;
JUD0:=REF(CLOSE,1)>=REF(UDGLINE,1) AND CLOSE<UDGLINE AND TUD0<TDU0;
JDU1:=JDU0 AND COUNT(JDU0,TDU0)=1;
JUD1:=JUD0 AND COUNT(JUD0,TUD0)=1;
JDU2:=JDU1 AND REF(BARSLAST(JUD1),1)<REF(BARSLAST(JDU1),1);
JUD2:=JUD1 AND REF(BARSLAST(JUD1),1)>REF(BARSLAST(JDU1),1);
JDU3:=JDU1 AND REF(BARSLAST(JUD1),1)>REF(BARSLAST(JDU1),1);
JUD3:=JUD1 AND REF(BARSLAST(JUD1),1)<REF(BARSLAST(JDU1),1);
BSLINE:=IF(BARSLAST(JDU2)<BARSLAST(JUD2),IF(REF(CROSS(0,MACD2),1),LLV(LOW,2),REF(LLV(LOW,2),BARSLAST(REF(CROSS
(0,MACD2),1)))),IF(REF(CROSS(MACD2,0),1),HHV(HIGH,2),REF(HHV(HIGH,2),BARSLAST(REF(CROSS(MACD2,0),1)))));
STICKLINE(MACD2>=0,0,MACD2,2,1),COLOR0000FF;
STICKLINE(MACD2>=0 AND MACD2<REF(MACD2,1),0,MACD2,2,0),COLOR0000FF;
STICKLINE(MACD2<0,0,MACD2,2,0),COLORFFFF00;
STICKLINE(MACD2<0 AND MACD2>REF(MACD2,1),0,MACD2,2,1),COLORFFFF00;
DIFIFF,LINETHICK2,COLOR0000FF;
MACDEA,COLORFF0000;
DEF:MACD2,LINETHICK0,COLORFFFF00;
STICKLINE(CLOSE>0,0,0,2,0),COLOR808080;
DEFUT:=BARSLAST(CROSS(MACD2,0));
DEFDT:=BARSLAST(CROSS(0,MACD2));
DEFUL:=IF(MACD2>=0,HHV(MACD2,DEFUT+1),REF(HHV(MACD2,DEFUT+1),DEFDT+1));
DEFDL:=IF(MACD2<0,LLV(MACD2,DEFDT+1),REF(LLV(MACD2,DEFDT+1),DEFUT+1));
DEFU2L:=REF(DEFUL,DEFUT+1);
DEFD2L:=REF(DEFDL,DEFDT+1);
DRAWICON(LLV(MACD2,4)>0 AND MACD2<REF(MACD2,1) AND REF(MACD2,1)>REF(MACD2,2) AND REF(MACD2,2)>REF(MACD2,3),MACD2,2);
DRAWICON(HHV(MACD2,4)<0 AND MACD2>REF(MACD2,1) AND REF(MACD2,1)<REF(MACD2,2) AND REF(MACD2,2)<REF(MACD2,3),MACD2,1);
DRAWICON((JUD1 OR BARSLAST(JDU1)>BARSLAST(JUD1)) AND MACD2>=0 AND REF(MACD2,1)<REF(DEFU2L,1) AND MACD2>DEFU2L,MACD2,5);
DRAWICON((JDU1 OR BARSLAST(JDU1)<BARSLAST(JUD1)) AND MACD2<0 AND REF(MACD2,1)>REF(DEFD2L,1) AND MACD2<DEFD2L,MACD2,3);
VAR111:=JDU1 OR BARSLAST(JDU1)<BARSLAST(JUD1);
VAR112:=HHV(MACD2,4)<0 AND MACD2>REF(MACD2,1) AND REF(MACD2,1)<REF(MACD2,2) AND REF(MACD2,2)<REF(MACD2,3);
16、变色MACD
DIFIF1:=EMA(CLOSE,12) - EMA(CLOSE,26);
DEAEA1:=EMA(DIFIF1,9);
MACD1:=2*(DIFIF1-DEAEA1),STICK;
MACD2:=EMA(MACD1,3);
STICKLINE(MACD1>MACD2 AND MACD1>0,0,MACD1,1,0),COLORRED;
STICKLINE(MACD1>MACD2 AND MACD1<0,0,MACD1,1,0),COLORGREEN;
STICKLINE(MACD1<MACD2,0,MACD1,1,0),COLORCBCBC0;
STICKLINE(MACD1>=0 OR MACD1<=0,0,0,50,1),COLORWHITE;
DIFIF1,COLOR33FF33,LINETHICK2;
DEAEA1,COLORYELLOW,LINETHICK2;
MACD:MACD1,NODRAW,COLORMAGENTA;
强:IF(DIFIF1>=DEAEA1,DIFIF1,DRAWNULL),COLORRED,LINETHICK2;
弱:IF(DEAEA1>=DIFIF1,DEAEA1,DRAWNULL),COLORFF9900,LINETHICK2;
DRAWICON(CROSS(DIFIF1,DEAEA1),DIFIF1+0.1,1);
DRAWICON(CROSS(DEAEA1,DIFIF1),-0.5,2);
DRAWTEXT(CROSS(DIFIF1,DEAEA1),DIFIF1,'○'),LINETHICK2, COLORYELLOW;
17、至尊MACD{注意用到了未来函数DCLOSE}{本指标只作趋势参考}
DIFF:EMA(DCLOSE,12)-EMA(DCLOSE,26);
DEA:EMA(DIFF,9),COLORFFFF00;
MACD:(DIFF-DEA)*2;
STICKLINE(MACD>=0 AND MACD>=REF(MACD,1),0,MACD,1,0),COLORRED;
STICKLINE(MACD>=0 AND MACD<=REF(MACD,1),0,MACD,1,0),COLORGREEN;
STICKLINE(MACD<=0 AND MACD>=REF(MACD,1),0,MACD,1,0),COLORFF00FF;
STICKLINE(MACD<=0 AND MACD<=REF(MACD,1),0,MACD,1,0),COLOR00FFFF;
多转空:=((((LLV(MACD,4)>0) AND (MACD<REF(MACD,1))) AND (REF(MACD,1)>REF(MACD,2))) AND (REF(MACD,2)>REF(MACD,3)));
空转多:=((((HHV(MACD,4)<0) AND (MACD>REF(MACD,1))) AND (REF(MACD,1)<REF(MACD,2))) AND (REF(MACD,2)<REF(MACD,3)));
DRAWICON(多转空,MACD,2);
DRAWICON(空转多,MACD,1);
低位金叉:=CROSS(DIFF,DEA) AND DIFF<-0.1;
DRAWTEXT(低位金叉,DEA,' 低位金叉'),COLORFF00FF;
JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));
二次金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1;
STICKLINE(二次金叉,0,0.2,2,0),COLORFF00FF;
DRAWTEXT(二次金叉,DEA*1.06,'二次金叉'),COLORRED;
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背离:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
DRAWTEXT(底背离,-0.2-MACD,'底背离'),COLORWHITE;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
顶背离:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
DRAWTEXT(顶背离,0.2+MACD,'顶背离'),COLORWHITE;
18、条件选股公式：(双佛手向上) 缺省周期：日线
======================================================================
DIFF := EMA(CLOSE,12) - EMA(CLOSE,26);
DEA := EMA(DIFF,27);
MACD := 2*(DIFF-DEA);
CLOSE>OPEN AND MA(CLOSE,5)>MA(CLOSE,10) and MA(CLOSE,10)>MA(CLOSE,30)
and DIFF>DEA AND MACD>REF(MACD,1) and DIFF>0 AND DEA>0 and MA(VOL,5)>MA(VOL,34)
and MA(CLOSE,30)>=REF(MA(CLOSE,30),1)
=======================================================================================
根据《南征北战之二》中的双佛手向上思路编写，指标用法：
1.DIFF线回调DEA线附近时不死叉，又调头向上。
2.30日均线走平或向上，同时5日线和10日线在30日线上方金叉,且当日收阳线。
3.5日均量线回调到34日均量线附近时不死叉,又调头向上。
以上三个条件要同时成立时将有一波上升浪，应果断买入。
将MACD指标的m参数调为27
19、条件选股公式：(漫步青云) 缺省周期：日线
======================================================================
DIFF := EMA(CLOSE,12) - EMA(CLOSE,26);
DEA := EMA(DIFF,27);
dje:=DIFF>=0 and DEA>=0 and CROSS(DIFF,DEA);
a5:=MA(CLOSE,5)>MA(CLOSE,10);
v5:=VOL>MA(VOL,5) and MA(VOL,5)>MA(VOL,10);
dje and a5 AND V5 AND MA(CLOSE,30)>=REF(MA(CLOSE,30),1)
======================================================
将macd指标的参数调为12,26,27
主要用法：当30日均线走平或上扬，5日均量大于10日均量，当日成交量大于5日均量，
5日均线金叉或已金叉10日均线，macd指标中diff线在0轴上死叉dea线，DIFF线下穿0轴后，又再次上穿并在0轴或0轴上金叉dea线，应果断介入。
但若此时K线离30日，30周,30小时均线较远，不能介入
20、======================================================================
条件选股公式：(空中缆绳) 缺省周期：日线
======================================================================
DIFF := EMA(CLOSE,12) - EMA(CLOSE,26);
DEA := EMA(DIFF,27);
MACD := 2*(DIFF-DEA);
b:=MIN(DIFF,DEA)/MAX(diff,dea)>0.95;
MA(CLOSE,30)>REF(MA(CLOSE,30),1) and diff>0 and dea>0 AND MACD>REF(MACD,1) and b
DRAWTEXT_FIX(1,0.88,5,0,'~☆神奇指标 出品☆~'),colorred;
将MACD指标的参数调为sh:12;long:26;M:27
用法:30日均线上扬或走平，主力开始洗盘。
这时macd指标中的DIFF线随股价的回调而与DEA线在0轴上粘合数值几乎相等，只要5日均线在30日均线上方金叉或已金叉10日均线，macd指标红柱加长，DIFF线脱离DEA线上扬,就是买点。
深圳市鹏芯集成电路有限公司
2023-06-12 广告
你这条件不就是底背离吗，但你这底背离的条件好像不够标准，过于简单啊。
是的 就想问怎么编写
加q
