请帮我翻译一下下面的英文好吗?谢谢大家了,一段段翻译也行``谢谢了~大写的那些专业术语可以放那的 10

brownout,supplyvoltagesupervisor(SVS)Thebrownoutcircuitisimplementedtoprovidetheprope... brownout, supply voltage supervisor (SVS)

The brownout circuit is implemented to provide the proper internal reset signal to the device during power on and power off. The SVS circuitry detects if the supply voltage drops below a user-selectable level and supports both supply voltage supervision (the device is automatically reset) and supply voltage monitoring (SVM) (the device is not automatically reset).
The CPU begins code execution after the brownout circuit releases the device reset. However, VCC may not have ramped to VCC(min) at that time. The user must ensure the default FLL+ settings are not changed until VCC reaches VCC(min). If desired, the SVS circuit can be used to determine when VCC reaches VCC(min).

digital I/O

There are nine 8-bit I/O ports implemented—ports P1 through P5 and P7 through P10.
All individual I/O bits are independently programmable.
Any combination of input, output, and interrupt conditions is possible.
Edge-selectable interrupt input capability for all the eight bits of ports P1 and P2.
Read/write access to port-control registers is supported by all instructions.
Ports P7/P8 and P9/P 10 can be accessed word-wise as ports PA and PB respectively.
Each I/O has an individually programmable pullup/pulldown resistor

DMA controller
The DMA controller allows movement of data from one memory address to another without CPU intervention. For example, the DMA controller can be used to move data from a USCI module to RAM. Using the DMA controller can increase the throughput of peripheral modules. The DMA controller reduces system power consumption by allowing the CPU to remain in sleep mode without having to awaken to move data to or from a peripheral.
展开
 我来答
猫籁
2009-02-18 · TA获得超过747个赞
知道小有建树答主
回答量:228
采纳率:0%
帮助的人:0
展开全部
欠压,电源电压主管( SVS )

电路的电压是实施提供适当的内部复位信号的装置,并在电源断电。 SVS电路的检测,如果电源电压低于用户可选择水平和支持电源电压监督(该设备会自动重启)和电源电压监控(向量) (该装置不能自动复位) 。
在CPU开始执行代码后,欠压电路发布设备重置。然而,虚拟通道连接可能不会加大到VCC (分)在那个时候。用户必须确保默认FLL +的设置没有改变,直到虚拟通道连接达到虚拟通道连接(分) 。如果需要,该SVS电路可用于确定何时虚拟通道连接达到虚拟通道连接(分) 。

数字I / O

有9个8位I / O端口实施,港口小通过P5和P7通过P10 。
所有个人的I / O位独立可编程。
任意组合的输入,输出,并中断的条件是可能的。
边缘可选择中断输入能力为所有的8位端口P1和P2 。
读/写访问端口控制寄存器的支持,所有的指示。
港口P7/P8和P9 /峰10可字明智港口扩声与PB分别。
每个I / O有一个单独的可编程上拉/下拉式电阻器

DMA控制器
DMA控制器可以在流动的数据从一个内存地址,以另一种无需CPU干预。例如, DMA控制器,可以用来将数据从一个USCI模块内存。利用DMA控制器可以提高吞吐量的外设模块。 DMA控制器的能耗降低了系统的CPU通过允许继续留在睡眠模式中唤醒,而无需将数据转移到或从周围。
已赞过 已踩过<
你对这个回答的评价是?
评论 收起
推荐律师服务: 若未解决您的问题,请您详细描述您的问题,通过百度律临进行免费专业咨询

为你推荐:

下载百度知道APP,抢鲜体验
使用百度知道APP,立即抢鲜体验。你的手机镜头里或许有别人想知道的答案。
扫描二维码下载
×

类别

我们会通过消息、邮箱等方式尽快将举报结果通知您。

说明

0/200

提交
取消

辅 助

模 式