Question

ccs3.3和dsp仿真器XDS100的问题。dspTMS320F28335的开发板。请问大家知道这个连接不上的问题是怎么了？

debug,connect之后出现警告：
Error connecting to the target:
Error 0x80000200/-1037
Fatal Error during: OCS,
PTI_ERR_EMU_CLOSE Error Occured at 0x00000000

I/O Port = 0

Board Name: F28335 XDS100 USB Emulator
Cpu Name: TMS320C2800_0

Abort: Close Code Composer Studio.
Retry: Try to connect to the target again.
Cancel: Remain disconnected from the target
Diagnostic: Run diagnostic utility.

Answer 1

经常遇到这个问题，你把板子断电，仿真器拔了，再重插，上点，插的时候注意插紧，必要的时候那个microUSB口手按着，再重连，一般能好

Answer 2

看DSP电压供电是否正常，核电压+外设电压。以前出现这个问题，供电上去就好了。

Answer 3

debug,connect之后出现警告：
Error connecting to the target:
Error 0x80000200/-1037
Fatal Error during: OCS,
PTI_ERR_EMU_CLOSE Error Occured at 0x00000000

I/O Port = 0

Board Name: F28335 XDS100 USB Emulator
Cpu Name: TMS320C2800_0

Abort: Close Code Composer Studio.
Retry: Try to connect to the target again.
Cancel: Remain disconnected from the target
Diagnostic: Run diagnostic utility.

Answer 4

楼主你遇到的这个问题解决了没有，能给我也说一下么，我也遇见了这个问题