Question

哪位好心人帮我翻译下面这段文字，谢谢！急

【摘要】
在生产塑料制品的模具中，注射模占很大比例，常用的注射模在开模时塑件脱离定模，包紧在动模型芯上，并跟随动模一起退回，通过动模的顶出机构把塑件顶出。设计模具时应充分考虑塑件的形状、摆放方式、分型面的位置、利用动、定模型腔不同的拔模斜度，或借助一些辅助功能等综合措施来实现这一过程。但对于某些几何形状特殊的塑件，即使采用以上综合措施也无法实现开模时塑件留在动模部分，这就需要在定模上安装某种机构，使这一过程得到实现。储液器注塑模分析了塑料储液器的工艺特性，详细论述了储液器模具的结构设计和工作过程。由斜导柱和开合哈夫滑块组成的定模推出机构不仅解决了开模时塑件滞留在定模一侧的问题，而且模具结构紧凑、工作可靠、操作简单、生产效率高。

关键词 定模推出机构 哈夫滑块 斜导柱 注射模

Answer 1

Die in the production of plastic products, accounting for a large proportion of injection mold, the scale used at the beginning of the injection mold plastic parts from the module, The model in tight packet core, and return together with dynamic simulation, the dynamic model out of the top of its head out of the transfer of plastic parts. Mold design should take full account of the shape of plastic parts, display, the sub-surface location of a dynamic, Cavity-scale gradient different set of brandy, or with the support of a number of ancillary functions of comprehensive measures to achieve this process. But for some special geometry of the plastic parts. Even with these comprehensive measures can not be realized when Plastics Molding in dynamic simulation, This requires the installation of the module in a certain sector, so that this process be achieved. Reservoir storage devices for the plastics injection mold analysis of the technological characteristics of the reservoir Die in detail the structural design and process. Hough and open cooperation by the bevel-scale introduction of the fixed slider component institutions have not only solved the Plastics Molding stranded at the side of the module. Mold and compact, reliable, simple operation and high productivity.
定模推出机构 Modeling agencies launched
注射模 Injection Mold