Abaqus模型如何设置模型冷却，先以5℃/min的速率冷却，然后降温到500℃的时候自然冷却。 初始温度1055℃

整体求解方程：KU=F。现在模型 abaqus已经算完了，想知道怎么导出这个整体的F？

Initial conditions specified on 1 elements are illegal for those elements. The elements have been identified in element set ErrElemBadInitCond.

想问一下哦，我想做的是一个三维纵扭超声振动铣削仿真。想在纵向和旋转方向施加两个方向的周期振动载荷，怎么施加的呀？这是我目前设置的，但是好像不对哎

我想问问这个周期载荷设置里画圈的这里是输入什么（图中是VR2右边的），几个振幅参数不是编辑里已经设置好了吗？

圆盘转速是200r/min，与中心一点coupling，设置转速和转角都试过了，应力都很大，请问各位大神这是为什么。下面是算的一个简单的例子（即使网格细化，应力也还是很大）

荷载如图，不知道怎么在ABAQUS上加载，请大佬指导。

用VS2012+IVF2013编制一个子程序，关于幅值的周期函数，在模型中提交作业失败了，错误类型是.....\tmpb0koxi.bat ended prematurely and may have crashed. exit code 0xc0000005 ---- error analysis ----- 05/28/24 08:48:33 Begin MFS->SFS and SIM cleanup 05/28/24 08:48:33 Run SMASimUtility.exe 05/28/24 08:48:33 End MFS->SFS and SIM cleanup Abaqus Error: The executable explicit.exe aborted with system error code 3. Please check the .dat, .msg, and .sta files for error messages if the files exist. If there are no error messages and you cannot resolve the problem, please run the command "abaqus job=support information=support" to report and save your system information. Use the same command to run Abaqus that you used when the problem occurred. Please contact your local Abaqus support office and send them the input file, the file support.log which you just created, the executable name, and the error code. Abaqus/Analysis exited with errors 请问是什么原因造成的呢？

选中区域无法使用指派的单元形势

想问一下哦，我想做的是一个三维纵扭超声振动铣削仿真。想在纵向和旋转方向施加两个方向的周期振动载荷，怎么施加的呀？这是我目前设置的，但是好像不对哎

The poisson ratio of 0.49500 exceeds 0.48 (the bulk modulus of 166.67 exceeds 25 times the shear modulus of 1.6722) for the elastic material named material-yaozhu. However, a hybrid type element is not used. This may cause convergence problems.